Random Isogeometric Analysis for Modeling Seepage in Unsaturated Soils
Publication: Journal of Engineering Mechanics
Volume 144, Issue 11
Abstract
This study proposes a new probabilistic framework, random isogeometric analysis (RIGA), combining isogeometric analysis (IGA) and random fields to numerically simulate seepage in unsaturated soils. The proposed framework benefits from computationally efficient IGA solutions and properly accounts for the variability of unsaturated soil parameters by using random field theory. Two constitutive models commonly used to describe the behavior of unsaturated soils, the soil water retention curve (SWRC) and hydraulic conductivity function (HCF), are considered under the proposed RIGA method. A database of unsaturated hydraulic properties is used to investigate the variability of SWRC and HCF model parameters for different soils. Random field concepts with statistical homogeneity (fixed mean, standard deviation, and spatial correlation) are implemented to generate SWRC and HCF model properties considering a joint lognormal distribution function among the model parameters. The joint lognormal distribution function is used with IGA to perform Monte Carlo simulations. The number of realizations in the Monte Carlo simulation accounts for the effect of stochastic soil parameters in unsaturated soil analysis. The application of the proposed RIGA is illustrated by simulating unsaturated seepage in two example problems, a one-dimensional flow in a rectangular domain and a two-dimensional infiltration problem in a semicircular furrow. The results of these problems depict the statistical outputs relating to seepage quantities and negative pore water pressure with respect to standard deviation and correlation between SWRC and HCF model parameters. In all cases, the results are compared with those obtained from an alternative deterministic analysis and it is shown that negative pore water pressure, flow rate, and other quantities of interest change considerably with respect to standard deviation and correlation of the model parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the financial support of National Strategic Planning and Analysis Research Center (NSPARC) at Mississippi State University.
References
Bazilevs, Y., V. M. Calo, Y. Zhang, and T. J. Hughes. 2006. “Isogeometric fluid–structure interaction analysis with applications to arterial blood flow.” Comput. Mech. 38 (4–5): 310–322. https://doi.org/10.1007/s00466-006-0084-3.
Beer, G., B. Marussig, and C. Duenser. 2013. “Isogeometric boundary element method for the simulation of underground excavations.” Geotech. Lett. 3 (3): 108–111. https://doi.org/10.1680/geolett.13.00009.
Borden, M. J., C. V. Verhoosel, M. A. Scott, T. J. Hughes, and C. M. Landis. 2012. “A phase-field description of dynamic brittle fracture.” Comput. Methods Appl. Mech. Eng. 217 (Apr): 77–95. https://doi.org/10.1016/j.cma.2012.01.008.
Brooks, R. H., and A. T. Corey. 1964. “Hydraulic properties of porous media and their relation to drainage design.” Trans. ASAE 7 (1): 26–28. https://doi.org/10.13031/2013.40684.
Cheng, Y., L. L. Zhang, J. H. Li, L. M. Zhang, J. H. Wang, and D. Y. Wang. 2016. “Consolidation in spatially random unsaturated soils based on coupled flow-deformation simulation.” Int. J. Numer. Anal. Methods Geomech. 41 (5): 682–706. https://doi.org/10.1002/nag.2572.
Chiu, C. F., W. M. Yan, and K. V. Yuen. 2012. “Reliability analysis of soil–water characteristics curve and its application to slope stability analysis.” Eng. Geol. 135–136 (Apr): 83–91. https://doi.org/10.1016/j.enggeo.2012.03.004.
Cottrell, J. A., T. J. Hughes, and Y. Bazilevs. 2009. Isogeometric analysis: Toward integration of CAD and FEA. Chichester, UK: Wiley.
De Boor, C. 1972. “On calculating with B-splines.” J. Approximation Theory 6 (1): 50–62. https://doi.org/10.1016/0021-9045(72)90080-9.
Elkateb, T., R. Chalaturnyk, and P. K. Robertson. 2003. “An overview of soil heterogeneity: Quantification and implications on geotechnical field problems.” Can. Geotech. J. 40 (1): 1–15. https://doi.org/10.1139/t02-090.
Fenton, G. A., and D. V. Griffiths. 2003. “Bearing-capacity prediction of spatially random c-φ soils.” Can. Geotech. J. 40 (1): 54–65. https://doi.org/10.1139/t02-086.
Fenton, G. A., and D. V. Griffiths. 2008. Risk assessment in geotechnical engineering. Hoboken, NJ: Wiley.
Fredlund, D. G., and A. Xing. 1994. “Equations for the soil-water characteristic curve.” Can. Geotech. J. 31 (4): 521–532. https://doi.org/10.1139/t94-061.
Gitirana, J. G., and D. G. Fredlund. 2005. “Evolution of the variability of unsaturated properties.” In Vol. 12 of Proc., 58th Canadian Geotechnical Conf., 128–135. Richmond, BC: Canadian Geotechnical Society.
Gomez, H., L. Cueto-Felgueroso, and R. Juanes. 2013. “Three-dimensional simulation of unstable gravity-driven infiltration of water into a porous medium.” J. Comput. Phys. 238 (Apr): 217–239. https://doi.org/10.1016/j.jcp.2012.12.018.
Green, D. K., K. Douglas, and G. Mostyn. 2015. “The simulation and discretisation of random fields for probabilistic finite element analysis of soils using meshes of arbitrary triangular elements.” Comput. Geotech. 68 (Jul): 91–108. https://doi.org/10.1016/j.compgeo.2015.04.004.
Griffiths, D. V., and G. A. Fenton. 1993. “Seepage beneath water retaining structures founded on spatially random soil.” Geotechnique 43 (4): 577–587. https://doi.org/10.1680/geot.1993.43.4.577.
Griffiths, D. V., and G. A. Fenton. 2007. “The random finite element method (RFEM) in slope stability analysis.” In Probabilistic methods in geotechnical engineering, 317–346. Vienna, Austria: Springer.
Griffiths, D. V., and G. A. Fenton. 2009. “Probabilistic settlement analysis by stochastic and random finite-element methods.” J. Geotech. Geoenviron. Eng. 135 (11): 1629–1637. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000126.
Hien, T. D., and H. C. Noh. 2017. “Stochastic isogeometric analysis of free vibration of functionally graded plates considering material randomness.” Comput. Methods Appl. Mech. Eng. 318 (May): 845–863. https://doi.org/10.1016/j.cma.2017.02.007.
Hughes, T. J., J. A. Cottrell, and Y. Bazilevs. 2005. “Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement.” Comput. Methods Appl. Mech. Eng. 194 (39): 4135–4195. https://doi.org/10.1016/j.cma.2004.10.008.
Irzal, F., J. J. Remmers, C. V. Verhoosel, and R. Borst. 2013. “Isogeometric finite element analysis of poroelasticity.” Int. J. Numer. Anal. Methods Geomech. 37 (12): 1891–1907. https://doi.org/10.1002/nag.2195.
Leij, F. J., W. J. Alves, M. T. van Genuchten, and J. R. Williams. 1996. The UNSODA unsaturated soil hydraulic database user’s manual, version 1.0. Washington, DC: USEPA.
Li, K., W. Gao, D. Wu, C. Song, and T. Chen. 2018. “Spectral stochastic isogeometric analysis of linear elasticity.” Comput. Methods Appl. Mech. Eng. 332 (Apr): 157–190. https://doi.org/10.1016/j.cma.2017.12.012.
Likos, W. J., N. Lu, and J. W. Godt. 2013. “Hysteresis and uncertainty in soil water-retention curve parameters.” J. Geotech. Geoenviron. Eng. 140 (4): 04013050. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001071.
Liu, L. L., Y. M. Cheng, and S. H. Zhang. 2017. “Conditional random field reliability analysis of a cohesion-frictional slope.” Comput. Geotech. 82 (Feb): 173–186. https://doi.org/10.1016/j.compgeo.2016.10.014.
Morgenstern, N. R. 2000. “Performance in geotechnical practice.” HKIE Trans. 7 (2): 2–15. https://doi.org/10.1080/1023697X.2000.10667819.
Mualem, Y. 1976. “A new model for predicting the hydraulic conductivity of unsaturated porous media.” Water Resour. Res. 12 (3): 513–522. https://doi.org/10.1029/WR012i003p00513.
Nguyen, M. N., T. Q. Bui, T. Yu, and S. Hirose. 2014. “Isogeometric analysis for unsaturated flow problems.” Comput. Geotech. 62 (Oct): 257–267. https://doi.org/10.1016/j.compgeo.2014.08.003.
Phoon, K. K. 2004. Vulnerability and risk associated with geohazards, general non-Gaussian probability models for first-order reliability method (FORM): A state-of-the-art report. Oslo, Norway: International Centre for Geohazards.
Phoon, K. K., and F. H. Kulhawy. 1999. “Characterization of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/t99-038.
Phoon, K. K., A. Santoso, and S. T. Quek. 2010. “Probabilistic analysis of soil-water characteristic curves.” J. Geotech. Geoenviron. Eng. 136 (3): 445–455. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000222.
Piegl, L. A., and W. Tiller. 1996. The NURBS book. New York: Springer.
Schweiger, H. F., and G. M. Peschl. 2005. “Reliability analysis in geotechnics with the random set finite element method.” Comput. Geotech. 32 (6): 422–435. https://doi.org/10.1016/j.compgeo.2005.07.002.
Shahrokhabadi, S., F. Vahedifard, and M. Bhatia. 2017. “Head-based isogeometric analysis of transient flow in unsaturated soils.” Comput. Geotech. 84 (Apr): 183–197. https://doi.org/10.1016/j.compgeo.2016.11.018.
Sivakumar Babu, G. L., and D. S. Murthy. 2005. “Reliability analysis of unsaturated soil slopes.” J. Geotech. Geoenviron. Eng. 131 (11): 1423–1428. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:11(1423).
Soraganvi, V. S., R. Ababou, and M. S. Mohan Kumar. 2016. “Analysis and upscaling of unsaturated flow through randomly heterogeneous soil.” J. Hydrol. Eng. 22 (4): 04016063. https://doi.org/10.1061/(ASCE)HE.1943-5584.0001480.
Spanos, P. D., and R. Ghanem. 1989. “Stochastic finite element expansion for random media.” J. Eng. Mech. 115 (5): 1035–1053. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:5(1035).
Tan, X. H., N. Hu, D. Li, M. F. Shen, and X. L. Hou. 2013. “Time-variant reliability analysis of unsaturated soil slopes under rainfall.” Geotech. Geol. Eng. 31 (1): 319–327. https://doi.org/10.1007/s10706-012-9565-7.
Valizadeh, N., T. Q. Bui, V. T. Vu, H. T. Thai, and M. N. Nguyen. 2013. “Isogeometric simulation for buckling, free and forced vibration of orthotropic plates.” Int. J. Appl. Mech. 5 (2): 1350017. https://doi.org/10.1142/S1758825113500178.
van Genuchten, M. T. 1980. “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J. 44 (5): 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.
Yu, T., T. Q. Bui, S. Yin, D. H. Doan, C. T. Wu, T. Van Do, and S. Tanaka. 2016. “On the thermal buckling analysis of functionally graded plates with internal defects using extended isogeometric analysis.” Compos. Struct. 136 (Feb): 684–695. https://doi.org/10.1016/j.compstruct.2015.11.002.
Zhang, L., and W. Yan. 2015. “Stability analysis of unsaturated soil slope considering the variability of soil-water characteristic curve.” In Geotechnical safety and risk V, 281–286. Amsterdam, Netherlands: IOS.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Aug 22, 2017
Accepted: May 16, 2018
Published online: Sep 12, 2018
Published in print: Nov 1, 2018
Discussion open until: Feb 12, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.