New Stochastic Approach of Vehicle Energy Dissipation on Nondeformable Rough Pavements
Publication: Journal of Engineering Mechanics
Volume 143, Issue 4
Abstract
The transportation sector is responsible for 27% of greenhouse gas emissions in the United States, implying that it plays an important role in achieving sustainability goals and slowing down the impact of climate change. To understand the influence of road roughness on vehicle fuel consumption, researchers have recently proposed stochastic pavement models combined with a mechanics-based vehicle model to study the energy dissipated by the vehicle suspension. Solutions were obtained in the frequency domain, where the computational effort increases rapidly as more complicated vehicle types and surface profiles are considered. This paper proposes a new formulation and solution procedure for estimating the energy dissipation in the tire and the suspension of vehicles traversing rough nondeformable pavements. Herein, a filtered white noise model of the road roughness is combined with a quarter-car model of the vehicle to yield an augmented state space representation. The Lyapunov equation governing the covariance of the responses is then solved to obtain the energy dissipation of the vehicle. Subsequently, examples are provided to illustrate the efficacy and flexibility of the proposed approach.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is partially funded by the Illinois State Toll Highway Authority (ISTHA). The authors are representatives of Illinois Center for Transportation (ICT). The contents of this report reflect the view of the authors, who are responsible for the facts and the accuracy of the data presented herein. The contents do not necessarily reflect the official view of policies of the Tollway or ICT. This paper does not constitute a standard, specification, or regulations.
References
Barak, P. (1991). “Magic numbers in design of suspensions for passenger cars.” SAE, Warrendale, PA.
Bruscella, B., Rouillard, V., and Sek, M. (1999). “Analysis of road surface profiles.” J. Transp. Eng., 55–59.
Chatti, K., and Zaabar, I. (2012). “Estimating the effects of pavement condition on vehicle operating costs.”, Transportation Research Board, Washington, DC.
Ellner, N. S., and Wachspress, E. L. (1968). “New ADI model problem applications.” Proc., FJCC, Dallas, 528–534.
Gillespie, T. D., Sayers, M. W., and Segal, L. (1980). “Calibration of response-type road roughness measuring systems.”, Transportation Research Board, Washington, DC.
Grigoriu, M. (1998). “Simulation of stationary non-Gaussian translation processes.” J. Eng. Mech., 121–126.
Hać, A. (1985). “Suspension optimization of a 2-DOF vehicle model using a stochastic optimal control technique.” J. Sound Vibr., 100(3), 343–357.
Hammarling, S. J. (1982). “Numerical solution of the stable, non-negative definite lyapunov equation.” IMA J Numer Anal., 2(3), 303–323.
HDM 4 version 2 [Computer software]. HDMGlobal, U.K.
ISO. (1995). “Mechanical vibration—Road Surface profile—Reporting of measured data.” ISO 8608:1995(E), Geneva.
Jazar, R. N. (2013). Vehicle dynamics: Theory and application, Springer Science and Business Media, New York.
Johannesson, P., and Rychlik, I. (2013). “Laplace processes for describing road profiles.” Proc. Eng., 66, 464–473.
Johannesson, P., and Rychlik, I. (2014). “Modeling of road profiles using roughness indicators.” Int. J. Vehicle Des., 66(4), 317–346.
Kropáč, O., and Múčka, P. (2008). “Effect of obstacles on roads with different waviness values on the vehicle response.” Vehicle Syst. Dyn., 46(3), 155–178.
Kropáč, O., and Peter, M. (2008a). “Deterioration model of longitudinal road unevenness based on its power spectral density indices.” Road Mater. Pavement Des., 9(3), 389–420.
Kropáč, O., and Peter, M. (2008b). “Indicators of longitudinal unevenness of roads in the USA.” Int. J. Veh. Des., 46(4), 393–415.
LaBarre, R. T., Forbes, R. T., and Andrew, S. (1969). “The measurement and analysis of road surface roughness.”, Motor Industry Research Association, Nuneaton, Warwickshire, U.K.
Lee, H. P. (1994). “Dynamic response of a beam with intermediate point constraints subject to a moving load.” J. Sound Vibr., 171(3), 361–368.
Lee, H. R., and Scheffel, J. L. (1968). “Runway roughness effects on new aircraft types.” J. Aerospace Transp., 94(1), 1–17.
Lighthill, J. (1958). Introduction to Fourier analysis and generalized functions, Cambridge University Press, London.
Louhghalam, A., Mazdak, T., and Ulm, F. (2015a) “Roughness-induced vehicle energy dissipation: Statistical analysis and scaling.” J. Eng. Mech., .
Louhghalam, A., Mehdi, A., and Ulm, F. (2015b). “Roughness-induced pavement-vehicle interactions: Key parameters and impact on vehicle fuel consumption.” Transp. Res. Rec., 2525, 62–70.
Lutes, L. D., and Hu, S. L. J. (1986). “Non-normal stochastic response of linear systems.” J. Eng. Mech., 127–141.
MATLAB [Computer software]. MathWorks, Natick, MA.
Múčka, P. (2004). “The road waviness and the dynamic tyre force.” Int. J. Veh. Des., 36(2/3), 216–232.
Newland, D. E. (1984). An introduction to random vibration and spectral analysis, 2nd Ed., Longman’s, London.
Robson, J. D. (1979). “Road surface description and vehicle response.” Int. J. Veh. Des., 1(1), 25–35.
Sandberg, U. (2011). “Rolling resistance basic information and state-of-the-art on measurement methods.”, Swedish National Road and Transport Research Institute (VTI), Linköping, Sweden.
Santero, N. (2009). “Pavements and the environment: A life-cycle assessment approach.” Univ. of California, Berkeley, CA.
Sayers, M. W., and Karamihas, S. M. (1998). “The little book of profiling.” Univ. of Michigan, Ann Arbor, MI.
Schiehlen, Werner. (2006). “White noise excitation of road vehicle structures.” Sadhana, 31(4), 487–503.
Shube, F., Mescouris, K., and Steinauer, B. (2003). “Neue Ansätze zur Berechnung der Längsunebenheit von Strassen–Zusammenhang von Längsebenheit und Schädingung der Wirbelsäule.” Strasse und Autobahn, 54(6), 321–328 (in German).
Snyder, J. E., and Wormley, D. N. (1977). “Dynamic interactions between vehicles and elevated, flexible randomly irregular guideways.” J. Dyn. Syst. Meas. Control, 99(1), 23–33.
Soong, T. T., and Grigoriu, M. (1993). Random vibration of mechanical and structural systems, Prentice-Hall, Englewood Cliffs, NJ.
Steinwoff, A., and Connon III, W. H. (2005). “Limitations of the Fourier transform for describing test course profiles.” Sound Vibr., 39(2), 12–17.
Sun, T., Zhang, Y., and Barak, P. (2002). “4-DOF vehicle ride model.”, SAE, Warrendale, PA.
Thite, A. N. (2012). “Development of a refined quarter car model for the analysis of discomfort due to vibration.” Adv. Acoust. Vibr, 2012, 7.
U.S. EIA (U.S. Energy Information Administration). (2014). “Monthly energy review.” ⟨http://www.eia.gov/totalenergy/data/monthly/pdf/flow/primary_energy.pdf⟩ (Jul. 8, 2014).
U.S. EPA. (2015). “Greenhouse gas emissions and sinks: 1990–2013.” Washington, DC.
Wachspress, E. L. (1988). “Iterative solution of the Lyapunov matrix equation.” Appl. Math. Lett., 1(1), 87–90.
Wang, T., Lee, I. S., Harvey, J., Kendall, A., Lee, E. B., and Kim, C. (2012). “UCPRC life-cycle assessment methodology and initial case studies for energy consumption and GHG emissions for pavement.” Univ. of California Pavement Research Center, Davis, CA.
Yu, B., and Lu, Q. (2012). “Life-cycle assessment of pavement: Methodology and case study.” Transp. Res. Part D: Transp. Environ., 17(5), 380–388.
Zhu, W. Q. (1992). Random vibration, Academic Press, Beijing.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Jan 5, 2016
Accepted: Sep 8, 2016
Published online: Nov 7, 2016
Published in print: Apr 1, 2017
Discussion open until: Apr 7, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.