Analysis of Elastic Media with Voids Using a Mixed-Collocation Finite-Element Method
Publication: Journal of Engineering Mechanics
Volume 143, Issue 4
Abstract
In this paper, a recently developed type of lower-order mixed finite elements is extended to model porous materials based on the microdilatation theory. These mixed finite elements are based on assuming independent linear generalized strain fields and collocating them with the generalized strains derived from primal variables (mechanical displacements and change in matrix volume fraction) at some cleverly chosen points within each element. This mixed formulation is very effective in alleviating the shear locking problem that regular lower-order finite elements suffer from. Hence the accuracy of the predicted mechanical fields (such as displacements and stresses), as well as the fields coupled with them (such as change in matrix volume fraction, which is also called microdilatation), is improved over regular finite-element formulation. The mixed-collocation formulation is also superior over other types of previously published hybrid-mixed finite-element formulations in that it avoids the Ladyzenskaja–Babuška–Brezzi (LBB) stability conditions completely because it does not include any Lagrange multipliers. The paper also presents some numerical examples that help in providing more insight on the effect of porosity-related parameters used in microdilatation theory on the behavior of porous materials. Finally, the paper defines two limits on the coupling number; the first considers the positive definiteness of the stored energy density, whereas the second sets the limit between auxetic (having negative Poisson’s ratio) and nonauxetic material behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The generous support of California State University, Northridge to the first author is thankfully acknowledged. The second and third authors acknowledge the support of the Slovak Science and Technology Assistance Agency registered under number APVV-14-0216.
References
Ashby, M. F., Evans, A. G., Fleck, N. A., Gibson, L. J., Hutchinson, J. W., and Wadley, H. N. G. (2000). Metal foams: A design guide, Butterworth Heinemann, Oxford, U.K.
Atkin, R. J., Cowin, S. C., and Fox, N. (1977). “On boundary conditions for polar materials.” ZAMP, 28(6), 1017–1026.
Babuška, I. (1973). “The finite element method with Lagrangian multipliers.” Numerische Mathematik, 20(3), 179–192.
Biot, M. A., and Willis, D. G. (1957). “Elastic coefficients of the theory of consolidation.” J. Appl. Mech., 24(Dec), 594–601.
Bishay, P. L., Sladek, J., Sladek, V., and Atluri, S. N. (2012). “Analysis of functionally graded magneto-electro-elastic composites using hybrid/mixed finite elements and node-wise material properties.” Comput. Mater. Continua, 29(3), 213–262.
Bishay, P. L., and Atluri, S. N. (2012). “High-performance 3D hybrid/mixed, and simple 3D Voronoi cell finite elements, for macro- & micro-mechanical modeling of solids, without using multi-field variational principles.” Comput. Model. Eng. Sci., 84(1), 41–98.
Brezzi, F. (1974). “On the existence, uniqueness and approximation of saddle-point problems arising from Lagrangian multipliers.” Revue Française D’automatique Informatique Recherche Opérationnelle Analyse Numérique, 8(2), 129–151.
Chandrasekharaiah, D. S. (1987). “Effects of surface stresses and voids on Rayleigh waves in an elastic solid.” Int. J. Eng. Sci., 25(2), 205–211.
Ciarletta, M., Iovane, G., and Sumbatyan, M. A. (2003). “On stress analysis for cracks in elastic materials with voids.” Int. J. Eng. Sci., 41(20), 2447–2461.
Colombo, P. K., and Scheffler, M., eds. (2005). Cellular ceramics, Wiley, Weinheim, Germany.
Cosserat, E., and Cosserat, F. (1909). Theorie des corps deformables, A. Hermann, Paris.
Cowin, S. C. (1984). “The stresses around a hole in a linear elastic material with voids.” Q. J. Mech. Appl. Math., 37(3), 441–465.
Cowin, S. C., and Nunziato, J. W. (1983). “Linear elastic materials with voids.” J. Elasticity, 13(2), 125–147.
Dong, L., and Atluri, S. N. (2011). “A simple procedure to develop efficient and stable hybrid/mixed elements, and Voronoi cell finite elements for macro- & micro-mechanics.” Comput. Mater. Continua, 24(1), 61–104.
Eringen, A. C. (1999). Microcontinuum field theories, Springer, New York.
Eringen, A. C., and Suhubi, E. S. (1964). “Nonlinear theory of simple micro-elastic solids–I.” Int. J. Eng. Sci., 2(2), 189–203.
Forest, S. (2009). “Micromorphic approach for gradient elasticity, viscoplasticity, and damage.” J. Eng. Mech., 117–131.
Forest, S., and Aifantis, E. C. (2010). “Some links between recent gradient thermo-elastoplasticity theories and the thermomechanics of generalized continua.” Int. J. Solids Struct., 47(25–26), 3367–3376.
Iesan, D., and Nappa, L. (2001). “Extremum principles and existence results in micromorphic elasticity.” Int. J. Eng. Sci., 39(18), 2051–2070.
Iesan, D., and Pompei, A. (1995). “On the equilibrium theory of microstretch elastic solids.” Int. J. Eng. Sci., 33(3), 399–410.
Iesan, D., and Quintanilla, R. (1994). “Existence and continuous dependence results in the theory of microstretch elastic bodies.” Int. J. Eng. Sci., 32(6), 991–1001.
Iovane, G., and Nasedkin, A. V. (2005). “Finite element analysis of static problems for elastic media with voids.” Comput. Struct., 84(1-2), 19–24.
Jenkins, J. T. (1975). “Static equilibrium of granular materials.” J. Appl. Mech., 42(3), 603–606.
Nunziato, J. W., and Cowin, S. C. (1979). “A non-linear theory of elastic materials with voids.” Arch. Ration. Mech. Anal., 72(2), 175–201.
Pian, T. H. H. (1964). “Derivation of element stiffness matrices by assumed stress distribution.” AIAA J., 2(7), 1333–1336.
Pian, T. H. H., and Wu, C. (1988). “A rational approach for choosing stress terms for hybrid finite element formulations.” Int. J. Numer. Methods Eng., 26(10), 2331–2343.
Popuzin, V., and Pennisi, M. (2014). “Fast numerical method for crack problem in the porous elastic material.” Meccanica, 49(9), 2169–2179.
Puri, P., and Cowin, S. C. (1985). “Plane waves in linear elastic materials with voids.” J. Elast., 15(2), 167–183.
Ramézani, H., and Jeong, J. (2015). “Non-linear elastic micro-dilatation theory: Matrix exponential function paradigm.” Int. J. Solids Struct., 67–68, 1–26.
Ramézani, H., Steeb, H., and Jeong, J. (2012). “Analytical and numerical studies on penalized micro-dilatation (PMD) theory: Macro-micro link concept.” Eur. J. Mech. A. Solids, 34, 130–148.
Rosenberg, J., and Cimrman, R. (2003). “Microcontinuum approach in biomechanical modeling.” Math. Comput. Simul., 61(3–6), 249–260.
Scalia, A. (2002). “Contact problem for porous elastic strip.” Int. J. Eng. Sci., 40(4), 401–410.
Scalia, A., and Sumbatyan, M. A. (2000). “Contact problem for porous elastic half-plane.” J. Elasticity, 60(2), 91–102.
Sladek, J., Sladek, V., Repka, M., and Bishay, P. L. (2016). “Static and dynamic behavior of porous elastic materials based on micro-dilatation theory: A numerical study using the MLPG method.” Int. J. Solids Struct., 96(Oct), 126–135.
Sun, F., and Bursi, O. (2005). “Displacement-based and two-field mixed variational formulations for composite beams with shear lag.” J. Eng. Mech., 199–210.
Terzaghi, K., Peck, R. B., and Mesri, G. (1996). Soil mechanics in engineering practice, 3rd Ed., Wiley, New York.
Thurieau, N., Njiwa, R. K., and Taghite, M. (2014). “The local point interpolation-boundary element method (LPI-BEM) applied to the solution of mechanical 3D problem of a micro-dilatation medium.” Eur. J. Mech. A. Solids, 47, 391–399.
Walsh, S. D. C., and Tordesillas, A. (2006). “Finite element methods for micropolar models of granular materials.” Appl. Math. Model., 30(10), 1043–1055.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: May 12, 2016
Accepted: Sep 8, 2016
Published online: Nov 10, 2016
Published in print: Apr 1, 2017
Discussion open until: Apr 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.