Development and Validation of a Two-Phase Model for Reinforced Soil by Considering Nonlinear Behavior of Matrix
Publication: Journal of Engineering Mechanics
Volume 136, Issue 6
Abstract
The paper presents the formulation of a two-phase system applied for reinforced soil media, which accounts for nonlinear behavior of matrix phase. In a two-phase material, the soil and inclusion are treated as two individual continuous media called matrix and reinforcement phases, respectively. The proposed algorithm is aimed to analyze the behavior of reinforced soil structures under operational condition focusing on geosynthetics-reinforced-soil (GRS) walls. The global behavior of such deformable structures is highly dependent to the soil behavior. By accounting for mechanical characteristics of the soil in GRS walls, a relatively simple soil model is introduced. The soil model is formulated in bounding surface plasticity framework. The inclusion is regarded as a tensile two-dimensional element, which owns a linear elastic-perfectly plastic behavior. Perfect bonding between phases is assumed in the algorithm. For validation of the proposed model, the behavior of several single element reinforced soil samples, containing horizontal and inclined inclusions, is simulated and the results are compared with experiment. It is shown that the model is accurately capable of predicting the behavior especially before peak shear strength. The proposed algorithm is then implemented in a numerical code and the behavior of a full-scale reinforced soil wall is simulated. The results of analysis are also reasonably well compared with those of experiment.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, T. M., Bathurst, R. J., Holtz, R. D., Walters, D. L., and Lee, W. F. (2003). “A new working stress method for prediction of reinforcement loads in geosynthetic walls.” Can. Geotech. J., 40(5), 976–994.
ASTM. (2009). “Standard test method for tensile properties of geotextiles by the wide-width strip method.” D4595-09, Vol. 04.13, West Conshohocken, Pa.
Bathurst, R. J., Allen, T. M., and Walters, D. L. (2005). “Reinforcement loads in geosynthetic walls and the case for a new working stress design method.” Geotext. Geomembr., 23(4), 287–322.
Bennis, M., and de Buhan, P. (2003). “A multiphase constitutive model of reinforced soils accounting for soil-inclusion interaction behavior.” Math. Comput. Modell., 37, 469–475.
Brinkgreve, R. B. J. (2005). “Selection of soil models and parameters for geotechnical engineering application.” Soil constitutive models: Evaluation, selection, and calibration, A. Yamamuro and V. N. Kaliakin, eds., ASCE, Reston, Va., 128.
Cividini, A. (2002). “A laboratory investigation on the behavior of reinforced sand samples under plane strain and triaxial conditions.” Soils Found., 42(6), 23–39.
Dafalias, Y. F. (1986a). “An anisotropic critical state soil plasticity model.” Mech. Res. Commun., 13(6), 341–347.
Dafalias, Y. F. (1986b). “Bounding surface plasticity, I: Mathematical foundation and hypoplasticity.” J. Eng. Mech., 112(12), 1263–1291.
Dafalias, Y. F., and Popov, E. P. (1975). “A model of nonlinearly hardening materials for complex loading.” Acta Mech., 21, 173–192.
de Buhan, P., Bourgeois, E., and Hassen, G. (2008). “Numerical simulation of bolt-supported tunnels by means of a multiphase model conceived as an improved homogenization procedure.” Int. J. Numer. Analyt. Meth. Geomech., 32(13), 1597–1615.
de Buhan, P., Mangiavacchi, R., Nova, R., Pellegrini, G., and Salencon, J. (1989). “Yield design of reinforced earth walls by a homogenization method.” Geotechnique, 39, 189–201.
de Buhan, P., and Sudret, B. (1999). “A two-phase elastoplastic model for unidirectionally-reinforced materials.” Eur. J. Mech. A/Solids, 18, 995–1012.
de Buhan, P., and Sudret, B. (2000). “Micropolar multiphase model for materials reinforced by linear inclusions.” Eur. J. Mech. A/Solids, 19, 669–687.
Desai, C. S., and El-Hoseiny, K. H. (2005). “Prediction of field behavior of reinforced soil wall using advance constitutive model.” J. Geotech. Geoenviron. Eng., 131(6), 729–739.
Desrues, J., and Viggiani, G. (2004). “Strain localization in sand: An overview of the experimental results obtained in Grenoble using stereophotogrammetry.” Int. J. Numer. Analyt. Meth. Geomech., 28, 279–321.
Duncan, J. M., and Chang, C. Y. (1970). “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. Found. Div., 99(SM5), 1629–1653.
Guler, E., Hamderi, M., and Demirkan, M. M. (2007). “Numerical analysis of reinforced soil retaining wall structures with cohesive and granular backfills.” Geosynthet. Int., 14(6), 330–345.
Harrison, W. J., and Gerrard, C. M. (1972). “Elastic theory applied to reinforced earth.” J. Soil Mech. And Found. Div., 98(12), 1325–1345.
Hassen, G., and de Buhan, P. (2005). “A two-phase model and related numerical tool for the design of soil structures reinforced by stiff linear inclusions.” Eur. J. Mech. A/Solids, 24, 987–1001.
Hatami, K., and Bathurst, R. J. (2005). “Development and verification of a numerical model for the analysis of geosynthetic reinforced soil segmental walls under working stress conditions.” Can. Geotech. J., 42(4), 1066–1085.
Hatami, K., and Bathurst, R. J. (2006). “A numerical model for reinforced soil segmental walls under surcharge loading.” J. Geotech. Geoenviron. Eng., 132(6), 673–684.
Helwany, S. M. B., Reardon, G., and Wu, J. T. H. (1999). “Effects of backfill on the performance of GRS retaining walls.” Geotext. Geomembr., 17(1), 1–16.
Holtz, R. D., and Lee, W. F. (2002). “Internal stability analysis of geosynthetic reinforced retaining walls.” Technical Rep. Prepared for Washington State Transportation Commission.
Ishihara, K. (1996). Soil behavior in earthquake geotechnics, Clarendon, Oxford, U.K.
Karpurapu, R., and Bathurst, R. J. (1995). “Behavior of geosynthetics reinforced soil retaining walls using the finite-element method.” Comput. Geotech., 17(3), 279–299.
Krieg, R. D. (1975). “A practical two-surface plasticity theory.” ASME J. Appl. Mech., 42, 641–646.
Lade, P. V., and Duncan, J. M. (1973). “Cubical triaxial tests on cohesionless soil.” J. Soil Mech. and Found. Div., 99(SM10), 793–812.
Leshchinsky, D., and Vulova, C. (2001). “Numerical investigation of the effects of geosynthetic spacing on failure mechanisms in MSE block walls.” Geosynthet. Int., 8(4), 343–365.
Li, X. S. (2002). “A sand model with state-depandent dilatancy.” Geotechnique, 52(3), 173–186.
Li, X. S., and Dafalias, Y. F. (2000). “Dilatancy for cohesionless soils.” Geotechnique, 50(4), 449–460.
Ling, H. I., Cardany, C. P., Sun, L. -X., and Hashimoto, H. (2000). “Finite-element study of a geosynthetic-reinforced soil retaining wall with concrete-block facing.” Geosynthet. Int., 7(3), 163–188.
Ling, H. I., and Leshchinsky, D. (2003). “Finite-element parameter studies of the behavior of segmental block reinforced soil retaining walls.” Geosynthet. Int., 10(3), 77–94.
Ling, H. I., and Yang, S. (2006). “A unified sand model based on critical state and generalized plasticity.” J. Eng. Mech., 132(12), 1380–1391.
Ling, H. L., Liu, H., Kaliakin, V. N., and Leshchinsky, D. (2004). “Analyzing dynamic behavior of geosynthetic-reinforced soil retaining walls.” J. Eng. Mech., 130(8), 911–920.
Manzari, M. T. (1994). “Finite deformation analysis and constitutive modeling of a non-cohesive soils for liquefaction problems.” Ph.D. dissertation, Univ. of California, Davis, Calif.
McGown, A., Andrawes, K. Z., and Hasani, M. M. (1978). “Effect of inclusion properties on the behavior of sands.” Geotechnique, 28(3), 327–346.
Michalowski, R. L., and Zhao, A. (1995). “Continuum versus structural approach to stability of reinforced soil.” J. Geotech. Eng., 121, 152–162.
Mroz, Z., and Zienkiewicz, O. C. (1984). “Uniform formulation of constitutive equations for clays and sand.” Mechanics of engineering materials, C. S. Desai and R. H. Gallagher, eds., Chapter 22, Wiley, New York, 415–459.
Nova, R., and Wood, D. M. (1979). “A constitutive model for sands in triaxial compression.” Int. J. Numer. Analyt. Meth. Geomech., 3, 255–278.
Pastor, M., Zienkiewicz, O. C., and Chan, A. H. C. (1990). “General plasticity and the modelling of soil behavior.” Int. J. Numer. Analyt. Meth. Geomech., 14, 151–190.
Romstad, K. M., Herrmann, L. R., Shen, C. K. (1976). “Integrated study of reinforced earth—I: Theoretical formulation.” J. Geotech. Engrg. Div., 102(GT5), 457–471.
Seyedi Hosseininia, E. (2008). “A contribution to development of multiphase model by considering the non-linear behavior of matrix applied to geosynthetics-reinforced soil (GRS) structures.” Ph.D. dissertation, Univ. of Tehran, Iran (in Persian).
Seyedi Hosseininia, E., and Farzaneh, O. (2008). “Presentation of a homogenized multi-phase model for reinforced soil considering non-linear behavior of matrix.” Proc., 12th Int. Conf. Int. Assoc. for Comp. Meth. and Adv. in Geomech. (IACMAG), Goa, India.
Sudret, B. (1999). “Modélisation multiphasique des ouvrages renforcés par inclusions.” Ph.D. thesis, Ecole nationale des ponts et chaussées, Paris (in French).
Sudret, B., and de Buhan, P. (2001). “Multiphase model for inclusion-reinforced geostructure: Application to rock-bolted tunnels and piles raft foundations.” Int. J. Analyt. Meth. Geomech., 25, 155–182.
Tatsuoka, F., and Yamauchi, H. (1986). “A reinforcing method for steep clay slopes with non-woven fabric.” Geotext. Geomembr., 4(3–4), 241–268.
Thai, S. Q., Hassen, G., and de Buhan, P. (2009). “A multiphase approach to the stability analysis of reinforced earth structures accounting for a soil-strip failure condition.” Comput. Geotech., 36, 454–462.
Wang, Z., Dafalias, Y. F., and Shen, C. (1990). “Bounding surface hypoplasticity model.” J. Eng. Mech., 116(5), 983–1001.
Yang, B. L., Dafalias, Y. F., and Herrmann, L. R. (1985). “A bounding surface plasticity model for concrete.” J. Eng. Mech., 111(3), 359–380.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jul 29, 2008
Published online: Nov 4, 2009
Accepted: Nov 11, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.