Worst-Case Pointwise Discretization Error Bounds for Systems with Geometrically Induced Singular Flux Solutions Using Interval Boundary Element Method
Publication: Journal of Engineering Mechanics
Volume 136, Issue 6
Abstract
This paper describes the interval boundary element method treatment of the pointwise discretization error for systems with geometrically generated flux singularities. Worst-case interval bounds are provided for the local discretization error for all elements except for the element with a singular flux solution, for which the flux intensity factor is enclosed. An example is presented showing the behavior of the interval bounds on the local discretization error for systems with geometrically induced singularities.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge the support from the Center for Reliable Engineering Computing (REC).
References
Alefeld, G., and Herzberger, J. (1983). Introduction to interval computations, Academic, New York.
Brebbia, C. A., and Dominguez, J. (1992). “Boundary elements: An introductory course.” Computational mechanics, McGraw-Hill, New York.
Burczynski, T., and Skrzypczyk, J. (1997). “Fuzzy aspects of the boundary element method.” Eng. Anal. Bound. Elem., 19, 209–216.
Dempster, A. P. (1967). “Upper and lower possibilities induced by a multi-valued mapping.” Ann. Math. Stat., 38, 325–339.
Gay, D. M. (1982). “Solving interval linear equations.” SIAM (Soc. Ind. Appl. Math.) J. Numer. Anal., 19(4), 858–870.
Hansen, E. (1965). “Interval arithmetic in matrix computation.” SIAM (Soc. Ind. Appl. Math.) J. Numer. Anal., 1(2), 308–320.
Hartmann, F. (1989). Introduction to boundary elements: Theory and applications, Springer, New York.
Jansson, C. (1990). “Interval linear system with symmetric matrices, skew-symmetric matrices, and dependencies in the right hand side.” Computing, 46, 265–274.
Jaswon, M. A., and Symm, G. T. (1977). Integral equation methods in potential theory and elastostatics, Academic, London.
Jou, J., and Liu, J. (1999). “A posteriori boundary element error estimation.” J. Comput. Appl. Math., 106, 1–19.
Krawczyk, R. (1969). “Newton-algorithmen zur bestimmung von nullstellen mit fehlerschranken.” Computing, 4, 187–201.
Modares, M., and Mullen, R. L. (2004). “Free vibration of structures with interval uncertainty.” Proc., 9th ASCE Specialty Conf. on Probabilistic Mechanics and Structural Reliability, ASCE, Reston, Va.
Moore, R. E. (1966). Interval analysis, Prentice-Hall, Englewood Cliffs, N.J.
Muhanna, R. L., and Mullen, R. L. (2001). “Uncertainty in mechanics problems—Interval-based approach.” J. Eng. Mech., 127(6), 557–566.
Muhanna, R. L., Mullen, R. L., and Zhang, H. (2005). “Penalty-based solution for the interval finite-element methods.” J. Eng. Mech., 131(10), 1102–1111.
Mullen, R. L., and Muhanna, R. L. (1999). “Bounds of structural response for all possible loadings.” J. Struct. Eng., 125(1), 98–106.
Neumaier, A. (1987). “Overestimation in linear interval equations.” SIAM (Soc. Ind. Appl. Math.) J. Numer. Anal., 24(1), 207–214.
Neumaier, A. (1989). “Rigorous sensitivity analysis for parameter-dependent systems of equations.” J. Math. Anal. Appl., 144, 16–25.
Neumaier, A. (1990). Interval methods for systems of equations, Cambridge University Press, New York.
Piasecka Belkhayat, A. (2009). “Interval boundary element method for 2D transient diffusion problem.” Eng. Anal. Boundary Elem., 32(5), 424–430.
Rencis, J. J., and Jong, K. -Y. (1989). “An error estimator for boundary element computations.” J. Eng. Mech., 115(9), 1993–2010.
Rump, S. M. (1990). “Rigorous sensitivity analysis for systems of linear and nonlinear equations.” Math. Comput., 54(190), 721–736.
Rump, S. M. (2001). “Self-validating methods.” Linear Algebr. Appl., 324, 3–13.
Sawada, T., and Imanari, M. (1986). “Error estimate of numerical integration in boundary element method analysis.” Bull. JSME, 29(258), 4072–4079.
Shafer, G. A. (1976). Mathematical theory of evidence, Princeton University Press, Princeton, N.J.
Stewart, G., and Sun, J. (1990). Matrix perturbation theory, Academic, San Diego.
Sunaga, T. (1958). “Theory of interval algebra and its application to numerical analysis.” RAAG Memoirs, 3(3), 29–46.
Taylor, B. (1715). Methodus incrementorum directa & inverse, Typis Pearsnianis, London.
Zadeh, L. A. (1978). “Fuzzy sets as a basis for theory of possibility.” Fuzzy Sets Syst., 1, 3–28.
Zalewski, B. F., and Mullen, R. L. (2008). “Certified bounds on interval Fredholm equations of the first and second kind.” Reliab. Comput. (in review).
Zalewski, B. F., and Mullen, R. L. (2009a). “Local discretization error bounds using interval boundary element method.” Int. J. Numer. Methods Eng., 78(4), 403–428.
Zalewski, B. F., and Mullen, R. L. (2009b). “Worst-case bounds on the pointwise discretization error in boundary element method for elasticity problem.” Comput. Methods Appl. Mech. Eng., 198(37–40), 2996–3005.
Zalewski, B. F., Mullen, R. L., and Muhanna, R. L. (2009a). “Interval boundary element method in the presence of uncertain boundary conditions, integration errors, and truncation errors.” Eng. Anal. Bound. Elem., 33, 508–513.
Zalewski, B. F., Mullen, R. L., and Muhanna, R. L. (2009b). “Fuzzy boundary element method for geometric uncertainty in elasticity problem.” SAE 2009 Reliability and Robust Design in Automotive Engineering Rep. No. SP-2232.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Aug 7, 2008
Accepted: Oct 25, 2009
Published online: Oct 29, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.