Project-Based Introduction to an Engineering Design Course Incorporating Microbial Fuel Cells as a Renewable Energy Technology
Publication: Journal of Professional Issues in Engineering Education and Practice
Volume 142, Issue 3
Abstract
The National Academy of Engineering has called for the reinvention of engineering education by exposing students to the iterative process of designing, predicting performance, building, and testing; incorporating research into engineering education; and introducing interdisciplinary learning in the undergraduate environment. Here we describe a novel effort to integrate an undergraduate research project into the problem-based design environment of a second-year introduction to engineering design course at Rensselaer Polytechnic Institute, providing a design and research experience early in the curriculum. The project-based environment allows students to learn technical communication (technical writing and oral presentations) and teamwork (including conflict management and team coordination) in parallel. Approximately 600 sophomores from different science, technology, engineering, and mathematics (STEM) disciplines take the course, working in multidisciplinary teams to address a complex challenge facing modern society. We describe a pedagogical approach that involves designing, building, and testing a microbial fuel cell over the course of a 15-week semester. We also show that the course addresses eight different outcomes required by ABET. The benefits of incorporating research into a design course include high student engagement, while creating opportunities for students to participate in professional meetings, compete in regional and national competitions, and contribute to the peer-reviewed literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported in part by the National Science Foundation under CBET division (Grant 1454102) and the National Aeronautics and Space Administration (Award NNX13AB25A). The funding sources had no involvement in the design of this study; in the collection, analysis, and interpretation of data; in the writing of the report; or in the decision to submit the paper for publication.
References
ABET. (2014). “Criteria for accrediting engineering programs, effective for evaluations during the 2015–2016 accreditation cycle.” Baltimore.
Aglan, H. A., and Ali, S. F. (1996). “Hands-on experiences: An integral part of engineering curriculum reform.” J. Eng. Educ., 85(4), 327–330.
Alkaher, I., and Dolan, E. L. (2014). “Integrating research into undergraduate courses: Current practices and future directions.” Research based undergraduate science teaching, D. Sunal, C. Sunal, E. Wright, C. Mason, and D. Zollman, eds., Information Age Publishing, Charlotte, NC.
Ayob, A., Hussain, A., Mustaffa, M. M., and Majid, R. A. (2012). “Assessment of creativity in electrical engineering.” Universiti-Kebangsaan-Malaysia Teaching and Learning Congress, S. R. S. Abdullah, S. A. Osman, and N. Mohamad, eds., Vol. II, Universiti Kebangsaan Malaysia, Selangor, Malaysia, 463–467.
Belanger, D., Fischbach, K., Azevedo, C. R., Sarsembayeva, S., Kilduff, J., and Gadhamshetty, V. (2013). “Extracting electron from food waste for drinking water treatment.” American Chemical Society, Washington, DC, 245.
CENews. (2014). “Getting a piece of the renewable energy market.” 〈http://www.cenews.com/article/7754/getting_a_piece_of_the_renewable_energy_market〉 (Nov. 17, 2014).
Comrie, A. C. (2000). “Mapping a wind-modified urban heat island in Tucson, Arizona (with comments on integrating research and undergraduate learning).” Bull. Am. Meteorol. Soc., 81(10), 2417–2431.
Cropley, D. H. (2015). “Promoting creativity and innovation in engineering education.” Psychol. Aesthetics Creativity Arts, 9(2), 161–171.
Dutson, A. J., Todd, R. H., Magleby, S. P., and Sorensen, C. D. (1997). “A review of literature on teaching engineering design through project-oriented capstone courses.” J. Eng. Educ., 86(1), 17–28.
Fogg, A., Agapi, S., Franco, D., and Gadhamshetty, V. (2014). “Easy electricity production from algae and farm wastes at ambient conditions.” American Chemical Society, Washington, DC, 247.
Fogg, A., Gadhamshetty, V., Franco, D., Wilder, J., Agapi, S., and Komisar, S. (2015). “Can a microbial fuel cell resist the oxidation of Tomato pomace?” J. Power Sources, 279, 781–790.
Fromm, E. (2002). “The changing engineering educational paradigm.” Bernard M. Gordon Lecture, National Academy of Engineering, Washington, DC.
Gadhamshetty, V., Arudchelvam, Y., Nirmalakhandan, N., and Johnson, D. C. (2010). “Modeling dark fermentation for biohydrogen production: ADM1-based model vs. Gompertz model.” Int. J. Hydrogen Energy, 35(2), 479–490.
Gadhamshetty, V., Belanger, D., Gardiner, C. J., Cummings, A., and Hynes, A. (2013a). “Evaluation of Laminaria-based microbial fuel cells (LbMs) for electricity production.” Bioresour. Technol., 127, 378–385.
Gadhamshetty, V., Fogg, A., Agapi, S., and Daniel, F. (2014). “New bioelectrochemical technology for production of DC power from vegetable wastes.” American Chemical Society, Washington, DC, 247.
Gadhamshetty, V., Johnson, D. C., Nirmalakhandan, N., Smith, G. B., and Deng, S. G. (2009). “Dark and acidic conditions for fermentative hydrogen production.” Int. J. Hydrogen Energy, 34(2), 821–826.
Gadhamshetty, V., and Koratkar, N. (2012). “Nano-engineered biocatalyst-electrode structures for next generation microbial fuel cells.” Nano Energy, 1(1), 3–5.
Gadhamshetty, V., Sukumaran, A., and Nirmalakhandan, N. (2011). “Photoparameters in photofermentative biohydrogen production.” Crit. Rev. Environ. Sci. Technol., 41(1), 1–51.
Gadhamshetty, V., Willner, W., Hynes, A. M., Tentori, E., and Nyman, M. (2013b). “Treatment of benzidine-congener-derived dyes for bioenergy production.” American Chemical Society, Washington, DC, 245.
Gadhamshetty, V., Willner, W., Nyman, M., and Hynes, A. P. (2013c). “Bioremediation of organic contaminants for energy production.” American Chemical Society, Washington, DC, 245.
Gadhamshetty, V., Willner, W. M., Nyman, M., and Hynes, A. P. (2013d). “Microbial fuel cell as a tool for chemical education.” American Chemical Society, Washington, DC, 245.
Gude, V. G., Kokabian, K., and Gadhamshetty, V. (2013). “Beneficial bioelectrochemical systems for energy, water, and biomass production.” J. Microb. Biotechnol., S6, 005.
Hulse, P., St George, J., and Wang, L. (2009). “How well does collaboration work in engineering project curriculum design.” Proc., ASEE Annual Conf. and Exposition, Austin, TX.
Hundhausen, C. D. (2002). “Integrating algorithm visualization technology into an undergraduate algorithms course: Ethnographic studies of a social constructivist approach.” Comput. Educ., 39 (3), 237–260.
Husic, D., and Hensel, N. (2011). “From transforming the curriculum to tackling global challenges– the role of undergraduate research in the 21st century.” PKAL 20th Anniversary Essay Collection, Project Kaleidoscope, Association of American Colleges and Universities, Washington, DC.
Kandpal, T. C., and Broman, L. (2014). “Renewable energy education: A global status review.” Renewable Sustainable Energy Rev., 34, 300–324.
Khanal, S. K. (2010). Bioenergy and biofuel from biowastes and biomass, ASCE, Reston, VA.
Logan, B. E. (2010). “Scaling up microbial fuel cells and other bioelectrochemical systems.” Appl. Microbiol. Biotechnol., 85(6), 1665–1671.
McCarty, P. L., Bae, J., and Kim, J. (2011). “Domestic wastewater treatment as a net energy producer-can this be achieved?” Environ. Sci. Technol., 45(17), 7100–7106.
McShannon, J., et al. (2006). “Gaining retention and achievement for students program: A faculty development program.” J Prof. Issues Eng. Educ. Pract., 204–208.
Montoya, L. D., Robyn, S., and Daniel, K. (2013). “Integrating engineering for developing communities into engineering education a case study.” Proc., 120th ASEE Annual Conf. and Exposition, American Society for Engineering Education, Washington, DC.
NAE (National Academy of Engineering). (2004). The engineer of 2020: Visions of engineering in the new century. National Academies Press, Washington, DC.
Nirmalakhandan, N., Ricketts, C., McShannon, J., Hynes, P., and Barret, S. (2007). “Teaching tools that satisfy multiple learning styles in undergraduate hydraulic engineering courses.” J. Prof. Issues Eng. Educ. Pract., 31–37.
Perera, K. R. J., Arudchelvam, Y., Gadhamshetty, V., and Nirmalakhandan, N. (2012). “Modeling and simulation of net energy gain by dark fermentation.” Int. J. Hydrogen Energy, 37(3), 2267–2272.
Perera, K. R. J., Ketheesan, B., Gadhamshetty, V., and Nirmalakhandan, N. (2010). “Fermentative biohydrogen production: Evaluation of net energy gain.” Int. J. Hydrogen Energy, 35(22), 12224–12233.
Prince, M. J., Felder, R. M., and Brent, R. (2007). “Does faculty research improve undergraduate teaching? An analysis of existing and potential synergies.” J. Eng. Educ., 96(4), 283–294.
Resch, G., Held, A., Faber, T., Panzer, C., Toro, F., and Haas, R. (2008). “Potentials and prospects for renewable energies at global scale.” Energy Policy, 36(11), 4048–4056.
Shah, D, French, J., Rankin, J., and Breslow, L. (2013). “Using video to tie engineering themes to foundational concepts.” Proc., 120th ASEE Annual Conf. and Exposition, American Society for Engineering Education, Washington, DC.
Thompson, N. S., Alford, E. M., Liao, C., Johnson, R. and Matthews, M. A. (2005). “Integrating undergraduate research into engineering: A communications approach to holistic education.” J. Eng. Educ., 94(3), 297–307.
Ulrich, K. T., and Eppinger, S. D. (2009). Product design and development, McGraw-Hill, Singapore.
U.S. EPA. (2014). “State and local climate and energy program: Water/wastewater.” 〈http://www.epa.gov/statelocalclimate/state/topics/water.html#one〉 (Nov. 17, 2014).
Information & Authors
Information
Published In
Journal of Professional Issues in Engineering Education and Practice
Volume 142 • Issue 3 • July 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 22, 2015
Accepted: Oct 8, 2015
Published online: Jan 6, 2016
Discussion open until: Jun 6, 2016
Published in print: Jul 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.