Evaluating the Relationships between Pb Species and Leaching Properties in Simulated MSWI Fly Ash with Thermal Treatment by ESCA
Publication: Journal of Environmental Engineering
Volume 138, Issue 6
Abstract
The aim of this study was to develop a fundamental understanding of the association between lead (Pb) species and leachability behavior in the simulated municipal solid waste incinerator (MSWI) fly ash during the thermal treatment process. Two main factors that influence this process, temperature and the carbon content in the simulated ash, were also studied. In the sequential extraction results, the main distribution pattern of Pb in treated simulated ash was carbonate fraction with different temperatures when the carbon content was 3.5%. The chief fraction of the raw simulated ash () was carbonate and that of raw simulated ash when carbon content was increased was Fe-Mn oxide Electron spectroscopy for chemical analysis (ESCA) results showed that Pb (element) in treated simulated ash could increase the toxicity characteristic leaching procedure (TCLP) concentration of Pb when temperatures reached 700°C. With a temperature of 900°C, was present in the treated simulated ash and reduced the TCLP concentration of Pb. A comparison of different carbon contents showed that -related compounds were present in the raw simulated ash and caused the distribution patterns of Pb to become stable as carbon content was increased.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alba, N., Vázquez, E., Gassó, S., and Baldasano, J. M. (2001). “Stabilization/solidification of MSW incineration residues from facilities with different air pollution control systems. Durability of matrices versus carbonation.” Waste Manage.WAMAE2, 21(4), 313–323.
Aloisi, M., Karamanov, A., and Pelino, M. (2004). “Sintered glass-ceramic from municipal solid waste incinerator ashes.” J. Non-Cryst. SolidsJNCSBJ, 345–346, 192–196.
Chan, C. C. Y., Kirk, D. W., and Marsh, H. (2000). “The behaviour of Al in MSW incinerator fly ash during thermal treatment.” J. Hazard. Mater.JHMAD9, B76(1), 103–111.
Cheng, T. W., Ueng, T. H., Chen, Y. S., and Chiu, J. P. (2002). “Production of glass-ceramic from incinerator fly ash.” Ceram. Int.CINNDH, 28(7), 779–783.
Chou, J. D., Wey, M. Y., and Chang, S. H. (2008). “Emission of Pb and PAHs from thermally co-treated MSWI fly ash and bottom ash process.” J. Hazard. Mater.JHMAD9, 150(1), 27–36.
Chou, S. Y., Lo, S. L., Hsieh, C. H., Chen, C. L. (2009a). “Sintering of MSWI fly ash by microwave energy.” J. Hazard. Mater.JHMAD9, 163(1), 357–362.
Chou, J. D., Wey, M. Y., and Chang, S. H. (2009b). “Evaluation of the distribution patterns of Pb, Cu and Cd from MSWI fly ash during thermal treatment by sequential extraction procedure”. J. Hazard. Mater.JHMAD9, 162(2–3), 1000–1006.
Chou, J. D., Wey, M. Y., and Chang, S. H. (2010). “Study on Pb and PAHs emission levels of heavy metals- and PAHs-contaminated soil during thermal treatment process.” J. Environ. Eng.JOEEDU, 136(1), 112–118.
ESCA database. 〈http://www.lasurface.com/accueil/index.php〉.
Ho, T. C., Chuang, T. C., Chelluri, S., Lee, Y., and Hopper, J. R. (2001). “Simultaneous capture of metal, sulfur and chlorine by sorbents during fluidized bed incineration.” Waste Manage.WAMAE2, 21(5), 435–441.
Hong, K. J., Tokunaga, S., and Kajiuchi, T. (2000). “Extraction of heavy metals from MSW incinerator fly ashes by chelating agents.” J. Hazard. Mater.JHMAD9, 75(1), 57–73.
Katsuura, H., Inoue, T., Hiraoka, M., and Sakai, S. (1996). “Full-scale plant study on fly ash treatment by the acid extraction process.” Waste Manage.WAMAE2, 16(5–6), 491–499.
Kirk, D. W., Chan, C. C. Y., and Marsh, H. (2002). “Chromium behavior during thermal treatment of MSW fly ash.” J. Hazard. Mater.JHMAD9, 90(1), 39–49.
Kuo, J. H., Tseng, H. H., Rao, P. S., and Wey, M. Y. (2008). “The prospect and development of incinerators for municipal solid waste treatment and characteristics of their pollutants in Taiwan.” Appl. Therm. Eng.ATENFT, 28(17–18), 2305–2314.
Liua, Y., Zheng, L., Li, X., and Xie, S. (2009). “SEM/EDS and XRD characterization of raw and washed MSWI fly ash sintered at different temperatures.” J. Hazard. Mater.JHMAD9, 162(1), 161–173.
Malviya, R., and Chaudhary, R. (2006). “Factors affecting hazardous waste solidification/stabilization: A review.” J. Hazard. Mater.JHMAD9, 137(1), 267–276.
Mekki, A., Holland, D., McConville, C. F., and Salim, M. (1996). “An XPS study of iron sodium silicate glass surfaces.” J. Non-Cryst. SolidsJNCSBJ, 208(3), 267–276.
Miura, Y., Kusano, H., Nanba, T., Matsumoto, S. (2001) “X-ray photoelectron spectroscopy of sodium borosilicate glasses.” J. Non-Cryst. SolidsJNCSBJ, 290(1), 1–14.
Rau, J. Y., Tseng, H. H., Chiang, B. C., Wey, M. Y., Lin, M. D. (2010). “Evaluation of oxidation and fly ash filtration by an activated carbon fluidized-bed reactor: The effects of acid modification, copper addition and operating condition.” FuelFUELAC, 89, 732–742.
Sørensen, M. A., Mogensen, E. P. B., Lundtorp, K., Jensen, D. L., and Christensen, T. H. (2001). “High temperature co-treatment of bottom ash and stabilized fly ash from waste incineration.” Waste Manage.WAMAE2, 21(6), 555–562.
Tessier, A., Campbell, P. G. C., and Bisson, M. (1979). “Sequential extraction procedure for the speciation of particulate trace metals.” Anal. Chem.ANCHAM, 51(7), 844–854.
Wang, K. S., Sun, C. J., and Yeh, C. C. (2002). “The thermotreatment of MSW incinerator fly ash for use as an aggregate: a study of the characteristics of size-fractioning.” Resour., Conserv. Recycl.RCREEW, 35(3), 177–190.
Wang, Q., et al. (2009). “Thermal treatment of municipal solid waste incinerator fly ash using DC double arc argon plasma.” FuelFUELAC, 88(5), 955–958.
Wasserman, R., and Bentur, A. (1996). “Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength.” Cem. Concr. Compos.CCOCEG, 18(1), 67–76.
Wey, M. Y., Liu, K. Y., Tsai, T. H., and Chou, J. T. (2006). “Thermal treatment of the fly ash from municipal solid waste incinerator with rotary kiln.” J. Hazard. Mater.JHMAD9, 137(2), 981–989.
Yang, J., Xiao, B., and Boccaccini, A. R. (2009). “Preparation of low melting temperature glass–ceramics from municipal waste incineration fly ash.” FuelFUELAC, 88(7), 1275–1280.
Yarlagadda, P. S., Matsumoto, M. R., VanBenschoten, J. E., and Kathuria, A. (1995) “Characteristics of Heavy Metals in Contaminated Soils.” J. Environ. Eng.JOEEDU, 121(4), 276–286.
Zhang, W., Lo, I. M. C. (2006). “EDTA-Enhanced Washing for Remediation of Pb- and/or Zn-Contaminated Soils.” J. Environ. Eng.JOEEDU, 132(10), 1282–1288.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Aug 9, 2010
Accepted: Nov 17, 2011
Published online: Nov 19, 2011
Published in print: Jun 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.