Client Safety Roles in Small and Medium Construction Projects in Australia
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 9
Abstract
Although research has been done to investigate construction safety and its importance, most has focused on construction organizations and workplace safety. There is still a need to investigate this issue by looking at stakeholders higher in the supply chain, particularly the ones who have the economic power to facilitate safety implementation. As such, this research has investigated the roles of construction clients on influencing safety performance. Data were collected using questionnaire surveys from employees working in small and medium construction projects in Australia. The findings of the research have not only confirmed the importance of clients in implementing safety, but also determined specific client roles that influence the development of safety climate in construction projects. It is recommended that clients should focus on the following six safety roles: participate in site-based safety program; review and analyze safety data; appoint safety team; select safe contractors; specify how safety is to be addressed in tenders; and perform regular checks on plant/equipment. Some clients may not consider safety as important as other traditional objectives, such as time, cost, environment, and quality. As such, they need to recognize the economic benefit of safety, thus becoming willing and committed to integrating safety into day-to-day business decisions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahasan, R. (2001). “Legacy of implementing industrial health and safety in developing countries.” J. Physiol. Anthropol. Appl. Hum. Sci., 20(6), 311–319.
ASCE. (2012). Policy Statement 350—Construction Site Safety, Reston, VA.
Australian Bureau of Statistics (ABS). (2013). Counts of Australian Businesses, including entries and exits, Canberra, Australia.
Business Roundtable. (1990). Improving Construction Safety Performance, Report A-3, The Business Roundtable, Washington.
Choudhry, R. M., and Fang, D. (2008). “Why operatives engage in unsafe work behaviours: Investigating factors on construction sites.” Saf. Sci., 46(4), 566–584.
Cooper, M. D., and Phillips, R. A. (2004). “Exploratory analysis of the safety climate and safety behavior relationship.” J. Saf. Res., 35(5), 497–512.
Dainty, A. R. J., Millet, S. J., and Briscoe, G. H. (2001). “New perspectives on construction supply chain integration.” Supply Chain Manage.: Int. J., 6(4), 163–173.
Davies, F., Spencer, R., and Dooley, K. (2001). Summary guide to safety climate tools, HSE Books, Norwich.
Egan, J. (1998). Rethinking construction, Dept. of Trade and Industry, London.
Glendon, A. I., and Litherland, D. K. (2001). “Safety climate factors, group differences and safety behaviour in road construction.” Saf. Sci., 39(3), 157–188.
Holt, A. S. J. (2005). Principles of construction safety, Blackwell Science, Oxford, UK.
Huang, X., and Hinze, J. (2006). “Owner’s role in construction safety.” J. Constr. Eng. Manage., 164–173.
Hughes, P., and Ferrett, E. (2007). Introduction to health and safety in construction, 2nd Ed., Elsevier, Oxford, UK.
Johnson, S. (2007). “The predictive validity of safety climate.” J. Saf. Res., 38(5), 511–521.
Kheni, N. A. (2008). “Impact of health and safety management on safety performance of small and medium-sized construction business in Ghana.” Ph.D. thesis, Dept. of Civil and Building Engineering, Loughborough Univ., Leicestershire, UK.
Leedy, P. (2001). Research Planning and Designing, 4th Ed., Sage, London.
Lingard, H., and Blismas, N. (2013). Client OHS leadership: An evaluation of client leadership in occupational health and safety in the Australian construction industry, RMIT Univ., Melbourne.
Lingard, H., Blismas, N., Cooke, T., and Cooper, H. (2009). “The model client framework: Resources to help Australian government agencies to promote safe construction.” Int. J. Manage. Projects Bus., 2(1), 131–140.
Lingard, H., and Rowlinson, S. (2005). Occupational health and safety in construction project management, Spon Press, Oxon.
Loosemore, M., and Andonakis, N. (2007). “Barriers to implementing OHS reforms—The experiences of small subcontractors in the Australian construction industry.” Int. J. Project Manage., 25(6), 579–588.
Mayhew, C., and Quinlan, M. (1997). “Subcontracting and occupational health and safety in the residential building industry.” Ind. Relat. J., 28(3), 192–205.
Ng, S. T., Kam, P. C., and Skitmore, R. M. (2005). “A framework for evaluating the safety performance of construction contractors.” Build. Environ., 40(10), 1347–1355.
Seo, D., Torabi, M., Blair, E., and Ellis, N. (2004). “A cross-validation of safety climate scale using confirmatory factor analytic approach.” J. Saf. Res., 35(4), 427–445.
Smallwood, J. (1998). “Client influence on contractor health and safety in South Africa.” Build. Res. Inf., 26(3), 181–189.
Sperling, L., Charles, M. B., Ryan, R., and Brown, K. (2008). “Driving safety: Enhancing communication between clients, constructors and designers.” Third International Conference of the Cooperative Research Centre (CRC) for Construction Innovation—Clients Driving Innovation: Benefiting from Innovation, 1–15, 12–14 March, Gold Coast, Australia.
Sun, A. C. S., and Zou, P. X. W. (2010). “Understanding the true costs of construction accidents.” CIB World Congress, 11–13 May, Salford, Manchester, U.K.
Sun, C. (2010). “An analysis of return on investment on safety management program in construction project.” M.S. thesis, Univ. of New South Wales, Kensington, Australia.
Sunindijo, R. Y., and Zou, P. X. W. (2012). “Political skill for developing construction safety climate.” J. Constr. Eng. Manage., 138(5), 605–612.
Tam, C. M., Tong, T. K. L., and Chan, K. K. (2006). “Rough set theory for distilling construction safety measures.” Constr. Manage. Econ., 24(11), 1199–1206.
Varonen, U., and Mattila, M. (2000). “The safety climate and its relationship to safety practices, safety of the work environment and occupational accidents in eight wood-processing companies.” Accid. Anal. Prev., 32(6), 761–769.
Zou, P. X. W., Sun, A. C. S., Long, B., and Marix-Evans, P. (2010). “Return on investment of safety risk management system in construction.” CIB World Congress, 11–13 May, Salford, Manchester, U.K.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 140 • Issue 9 • September 2014
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 26, 2013
Accepted: May 15, 2014
Published online: Jun 19, 2014
Published in print: Sep 1, 2014
Discussion open until: Nov 19, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.