Productivity Gains in a Line Flow Precast Concrete Process after a Basic Stability Effort
Publication: Journal of Construction Engineering and Management
Volume 140, Issue 4
Abstract
Lean principles and methods have been successfully applied to precast concrete job shops and batch flows. The conversion of processes from batch flow environments to line flow environments is the main reason for the productivity gains that have been reported in the literature. By means of an action-research approach rooted in the philosophy of lean thinking, the authors show that further productivity gains are possible for precast concrete fabrication processes already running in line flow. This study took place at a company that had previously implemented lean measures, such as value stream mapping (VSM), workplace organization (5S Method), pull systems, and total productive maintenance (TPM). This earlier initiative provided productivity gains, although in a variable and unsustained way. The research approach could devise a simple stability process with a focus on method and manpower. After a series of improvement cycles, the production process achieved almost complete stability and obtained an additional productivity gain of 24%. These results suggest that neglecting stability issues in lean implementations means wasting part of the potential gains, in addition to risking the loss of previously obtained gains, even in environments apparently optimized for line flow.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ballard, G. (2000). “The last planner system of production control.” Ph.D. thesis, Univ. of Birmingham, Birmingham, U.K.
Ballard, G., and Arbulu, R. (2004). “Making prefabrication lean.” Proc., 12th Annual Conf. of the Int. Group for Lean Construction, LO-School, Elsinore, Denmark, 629–642.
Ballard, H. G., Harper, N., and Zabelle, T. (2003). “Learning to see work flow: An application of lean concepts to precast concrete fabrication.” Eng. Constr. Archit. Manage., 10(1), 6–14.
Brink, T., and Ballard, G. (2005). “SLAM—A case study in applying lean to job shops.” Proc., ASCE Construction Research Congress, ASCE, Reston, VA, 1–12.
Bulhões, I. R., and Picchi, F. A. (2011). “Diretrizes para a implementação de fluxo contínuo em obras de edificações” (Guidelines for implementing continuous flow in building projects). Revista Ambiente Construído, 11(4), 205–223.
Bulhões, I. R., Picchi, F. A., and Folch, A. T. (2006). “Actions to implement continuous flow in the assembly of prefabricated concrete structure.” Proc., 12th Annual Conf. of the Int. Group for Lean Construction (IGLC), PUC-Chile, Santiago, Chile, 407–419.
Cheng, T. C. E., and Podolsky, S. (1996). Just-in-time manufacturing: An introduction, Chapman & Hall, London.
Gallardo, C. A. S., Granja, A. D., and Picchi, F. A. (2006). “Integración de la gestión de fabricación y montaje de elementos de concreto pre-fabricados in situ utilizando conceptos de lean thinking” (Integration of casting and management of fabrication and assembly of in-situ precast concrete elements using Lean Thinking concepts). Revista Ingeniería de Construcción, 21(1), 5–12.
Koskela, L. (1992). “Application of the new production philosophy to construction.”, Univ. of Stanford, Stanford, CA.
Koskela, L. (2000). “An exploration towards a production theory and its application to construction.” Ph.D. thesis, VTT Building Technology, Espoo, Finland.
Lean Enterprise Institute. (2003). “Lean lexicon: A graphical glossary for lean thinkers.” Lean Enterprise Institute, Cambridge, MA.
Liker, J., and Meier, D. (2005). The Toyota way field book, McGraw-Hill, New York.
Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer, McGraw-Hill, New York.
Monden, Y. (2011). Toyota production system: An integrated approach to just in time, 4th Ed., Productivity Press, New York.
Rother, M., and Harris, R. (2002). “Creating continuous flow.” Lean Enterprise Institute, Cambridge, MA.
Rother, M., and Shook, J. (2002). “Learning to see.” Lean Enterprise Institute, Cambridge, MA.
Sacks, R., Eastman, C. M., and Lee, G. (2004). “Process model perspectives on management and engineering procedures in the precast/prestressed concrete industry.” J. Constr. Eng. Manage., 206–215.
Shingo, S. (1996). “A study of the Toyota production system.” Productivity Press, New York.
Smalley, A. (2005). “The starting point for lean manufacturing: Achieving basic stability.” Manage. Serv., 49(4), 8–12.
Womack, J. P., and Jones, D. T. (2004). “Lean thinking: Banish waste and create wealth in your corporation.” Simon & Schuster, New York.
Womack, J. P., Jones, D. T., and Ross, D. (1992). “The machine that changed the world.” Rawson Associates Scribner, New York.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 12, 2013
Accepted: Apr 22, 2013
Published online: Dec 17, 2013
Published in print: Apr 1, 2014
Discussion open until: May 17, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.