Fatigue Performance of Overhead Truss Sign Structure Coupler Connections
Publication: Journal of Performance of Constructed Facilities
Volume 36, Issue 2
Abstract
Nearly all aluminum overhead truss sign structures (OHTSSs) in Kansas constructed before 2015 use an identical type of hot-riveted coupling assembly to provide connections between vertical poles and horizontal truss members. Although many of the connections have been in service for 30 to 40 years, no research has been conducted to determine their fatigue performance. This paper presents a study aimed at characterizing the fatigue performance of the coupler connections. The study includes a series of finite-element (FE) analyses and 24 experimental fatigue tests. The FE analyses were used to determine design-level fatigue demands on the coupler connections and to provide information for designing the experimental setups used in this test program. Four sign structures with three connection properties and six loading modes were modeled. The experimental tests were conducted to characterize the fatigue performance of the connection. Tests were conducted for three loading modes with respect to the load on the rivet connecting the two interior half-couplers: (1) tension, (2) vertical shear, and (3) horizontal shear. Results indicated that when loaded below 10 Ksi (68.9 MPa), the connection can be classified as a Category E′ based on stress in the rivet. The FE analyses and test results indicated that fatigue failures are unlikely to occur in the coupler connections used in OHTSSs. In addition, two used coupler assemblies from OHTSSs taken out of service were also tested and the failure surfaces were examined under a microscope. No reliable evidence of preexisting cracks was found.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful to the Kansas Department of Transportation for their support of this research.
References
AASHTO. 1994. Standard specifications for structural supports for highway signs, luminaires and traffic signals. 3rd ed. Washington, DC: AASHTO.
AASHTO. 2001. Standard specifications for structural supports for highway signs, luminaires and traffic signals. 4th ed. Washington, DC: AASHTO.
AASHTO. 2009. Standard specifications for structural supports for highway signs, luminaires and traffic signals. 5th ed. Washington, DC: AASHTO.
AASHTO. 2015. Standard specifications for structural supports for highway signs, luminaires and traffic signals. 6th ed. Washington, DC: AASHTO.
Alshareef, H. A. 2018. “Initial analytical investigation of overhead sign trusses with respect to remaining fatigue life and predictive methods for inspection.” Ph.D. dissertation, Dept. of Civil Engineering, Kansas State Univ.
Arabi, S., and B. Shafei. 2019. “Multi-stressor fatigue assessment of steel sign-support structures: A case study in Iowa.” Eng. Struct. 200 (Dec): 109721. https://doi.org/10.1016/j.engstruct.2019.109721.
Arabi, S., B. Shafei, and B. M. Phares. 2018. “Fatigue analysis of sign-support structures during transportation under road-induced excitations.” Eng. Struct. 164 (Sep): 305–315. https://doi.org/10.1016/j.engstruct.2018.02.031.
Dexter, R. J., and M. J. Ricker. 2002. Fatigue-resistant design of cantilevered signal, sign, and light supports. NCHRP Rep. 469. Washington, DC: Transportation Research Board.
Foley, C. M., S. J. Ginal, J. L. Peronto, and R. A. Fournelle. 2004. Structural analysis of sign bridge structures and luminaire supports. Rep. 04-03. Milwaukee, WI: Marquette Univ.
Fouad, F. H., E. A. Calvert, and E. Nunez. 1998. Structural supports for highway signs, luminaires, and traffic signals. NCHRP Rep. 411. Washington, DC: Transportation Research Board.
Fouad, F. H., J. S. Davidson, E. A. Calvert, S. Chen, E. Nunez, and R. Abdalla. 2003a. Structural supports for highway signs, luminaires and traffic signals draft final report. NCHRP Project 17-10(2). Washington, DC: Transportation Research Board.
Fouad, F. H., J. S. Davidson, N. Delatte, E. A. Calvert, S. Chen, E. Nunez, and R. Abdalla. 2003b. Structural supports for highway signs, luminaires, and traffic signals. NCHRP Rep. 494. Washington, DC: Transportation Research Board.
Foutch, D. A., S. A. Rice, J. M. Lafave, S. Valdovinos, and T. W. Kim. 2006. Evaluation of aluminum highway sign trusses and standards for wind and truck gust loadings. FHWA/IL/PRR 153. Springfield, IL: Illinois Dept. of Transportation.
Huckelbridge, A. A., Jr., and A. T. Metzger. 2009. “Investigation of the Dayton, Ohio, IR 75 sign truss failure of September 11, 2006.” J. Perform. Constr. Facil. 23 (5): 372–378. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000033.
Kacin, J., P. Rizzo, and M. Tajari. 2010. “Fatigue analysis of overhead sign support structures.” Eng. Struct. 32 (6): 1659–1670. https://doi.org/10.1016/j.engstruct.2010.02.014.
Kaczinski, M. R., R. J. Dexter, and J. P. Van Dien. 1998. Fatigue-resistant design of cantilevered signal, sign and light supports. NCHRP Rep. 412. Washington, DC: Transportation Research Board.
McCollom, B. F. 1973. Testing of overhead sign support truss to end-support connections. Rep. K-F-72-3. Topeka, KS: State Highway Commission of Kansas.
McLean, T. W., J. S. Park, and J. M. Stallings. 2004. Fatigue evaluation of two variable message sign structures. Montgomery, AL: Alabama Dept. of Transportation.
Munse, W. H., and H. L. Cox. 1956. The static strength of rivets subjected to combined tension and shear. Urbana, IL: Univ. of Illinois Bulletin.
Ong, C., B. Chang, and J. Lee. 2020. “Thermal-induced fatigue of overhead truss structures.” J. Perform. Constr. Facil. 34 (2): 04020016. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001416.
Pantelides, C. P., J. Nadauld, and L. Cercone. 2003. “Repair of cracked aluminum overhead sign structures with glass fiber reinforced polymer composites.” J. Compos. Constr. 7 (2): 118–126. https://doi.org/10.1061/(ASCE)1090-0268(2003)7:2(118).
Rice, J. A., D. A. Foutch, J. M. LaFave, and S. Valdovinos. 2012. “Field testing and analysis of aluminum highway sign trusses.” Eng. Struct. 34 (8): 173–186. https://doi.org/10.1016/j.engstruct.2011.09.021.
Shurbert-Hetzel, C., B. Shafei, and B. Phares. 2021. “Performance of steel dynamic message sign-support structures in extreme wind events.” Eng. Struct. 237 (Feb): 112086. https://doi.org/10.1016/j.engstruct.2021.112086.
Wilson, W. M., and W. A. Oliver. 1930. Tension tests of rivets. Urbana, IL: Univ. of Illinois Bulletin.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 36 • Issue 2 • April 2022
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 26, 2021
Accepted: Sep 16, 2021
Published online: Dec 28, 2021
Published in print: Apr 1, 2022
Discussion open until: May 28, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.