Assessment of Structural Robustness under Different Events according to Vulnerability
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 5
Abstract
Structural robustness is investigated in this study according to its opposite property, i.e., structural vulnerability, which is calculated as the assembly of component vulnerability measured by the vulnerability coefficient. Different types of vulnerability coefficients are suitable for both truss and RC frame structures. An importance coefficient based on the bearing capacity of the remaining structure is proposed to reveal the internal topology and failure scenarios, and is viewed as the weight coefficient of the corresponding vulnerability coefficient. The occurrence probability density function is introduced to describe the uncertainty of abnormal events and assess structural robustness under different events. Numerical examples of several idealized trusses and a RC frame are performed to demonstrate the use of the proposed robustness index. Analysis results show that the robustness index provided good explanation for robustness quantification for both truss and RC frame structures under different events. Moreover, two methods, i.e., increasing the local resistance and redundancy of the structure, to upgrade structural robustness also testify to the effectiveness and accuracy of the robustness index.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper has been funded in part by the National Natural Science Foundation of China (No. 51078132). The authors also acknowledge Zhongyuan Xu for his assistance in graph software and Libo Yan for his valuable comments on this paper.
References
Baker, J. W., Schubert, M., and Faber, M. H. (2008). “On the assessment of robustness.” Struct. Saf., 30(3), 253–267.
Biodini, F., Frangopol, D. M., and Stefano, R. (2008). “On structural robustness, redundancy, and static indeterminacy.” Proc., ASCE Structures Congress, ASCE, Reston, VA, 1–10.
Cesare, M. A., and Archilla, J. C. (2006). “A model for progressive collapse of conventional framed buildings.” Proc., 17th Analysis and Computation Specialty Conf., ASCE, Reston, VA, 1–16.
Dutuit, Y., and Rauzy, A. (2001). “Efficient algorithms to assess component and gate importance in fault tree analysis.” Reliability Eng. Syst. Saf., 72(2), 213–222.
Ellingwood, B. R. (2006). “Mitigating risk from abnormal loads and progressive collapse.” J. Perform. Constr. Facil., 315–323.
Ellingwood, B. R., and Leyendecker, E. V. (1978). “Approaches for design against progressive collapse.” J. Struct. Div., 104(3), 413–423.
England, J., Agarwal, J., and Blockley, D. (2008). “The vulnerability of structures to unforeseen events.” Comp. Struct., 86(10), 1042–1051.
Frangopol, D. M., and Curley, J. P. (1987). “Effects of damage and redundancy on structural reliability.” J. Struct. Eng., 1533–1549.
Fu, G., and Frangopol, F. D. M. (1990). “Balancing weight, system reliability and redundancy in a multi objective optimization framework.” Struct. Saf., 7(2), 165–175.
Helmy, H., Salem, H., and Mourad, S. (2013). “Computer-aided assessment of progressive collapse of reinforced concrete structures according to GSA code.” J. Perform. Constr. Facil., 529–539.
Huang, L., Lu, Y. Q., and Shi, C. X. (2013). “Unified calculation method for symmetrically reinforced concrete section subjected to combined loading.” ACI Struct. J., 10(1), 127–136.
Kaewkulchai, G., and Williamson, E. B. (2006). “Modeling the impact of failed members for progressive collapse analysis of frame structures.” J. Perform. Constr. Facil., 20(4), 375–383.
Kanno, Y. (2012). “Worst scenario detection in limit analysis of trusses against deficiency of structural components.” Eng. Struct., 42(12), 33–42.
Kanno, Y., and Ben-Haim, Y. (2011). “Redundancy and robustness, or when is redundancy redundant.” J. Struct. Eng., 935–945.
Kim, J. J., and Taha, M. R. (2009). “Robustness to uncertainty: An alternative perspective in realizing uncertainty in modeling deflection of reinforced concrete structures.” J. Struct. Eng., 998–1001.
Lu, Y. Q., Huang, L., Xu, Z. P., and Yin, P. (2015). “Strength envelope of symmetrically reinforced concrete members under bending-shear-axial loads.” Mag. Concr. Res., 67(16), 885–896.
McGuire, W. (1974). “Prevention of progressive collapse.” Proc., Regional Conf. on Tall Buildings, Institute of Technology, Bangkok, Thailand, 851–865.
Nafday, A. M. (2008). “System safety performance metrics for skeletal structures.” J. Struct. Eng., 499–504.
Qian, K., and Li, B. (2012). “Experimental and analytical assessment on RC interior beam-column subassemblages for progressive collapse.” J. Perform. Constr. Facil., 576–589.
Qian, K., and Li, B. (2013). “Analytical evaluation of the vulnerability of RC frames for progressive collapse caused by the loss of a corner column.” J. Perform. Constr. Facil., 04014025.
SCOSS (Standing Committee on Structural Safety). (1994). “10th report of SCOSS.” London.
Sørensen, J. D. (2011). “Framework for robustness assessment of timber structures.” Eng. Struct., 33(11), 3087–3092.
Starossek, U. (2006). “Progressive collapse of structures: Nomenclature and procedures.” Struct. Eng. Int., 16(2), 113–117.
Starossek, U., and Haberland, M. (2008). “Measures of structural robustness—Requirements and applications.” Structures Congress 2008: Crossing Borders, ASCE, Reston, VA, 1–10.
Starossek, U., and Haberland, M. (2009). “Evaluating measures of structural robustness.” Proc., Structures Congress, ASCE, Reston, VA, 1–8.
Starossek, U., and Haberland, M. (2010). “Disproportionate collapse: Terminology and procedures.” J. Perform. Constr. Facil., 519–528.
Starossek, U., Smilowitz, R., Waggoner, M., Rubenacker, K., and Haberland, M. (2011). “Report of the terminology and procedures Sub-Committee (SC1): Recommendations for design against disproportionate collapse of structures.” Proc., Structures Congress, ASCE, Reston, VA, 2090–2103.
Ziha, K. (2001). “Event oriented of series structural systems.” Struct. Saf., 23(1), 1–29.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 1, 2014
Accepted: Oct 23, 2015
Published online: Jan 7, 2016
Discussion open until: Jun 7, 2016
Published in print: Oct 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.