Posthandover Housing Defects: Sources and Origins
Publication: Journal of Performance of Constructed Facilities
Volume 27, Issue 6
Abstract
In Spain, the high levels of inexperienced workers and the long chains of subcontracting contribute to the poor quality of dwellings. Although the Ley reguladora de la subcontratación en el Sector de la Construcción (subcontracting law) has established quality measures, the number of customer complaints is still increasing. In this paper, a total of 2,351 posthandover defects derived from four Spanish builders and seven residential developments are classified according to their source and origin. The research reveals that the most common defects identified by customers at posthandover were derived from bad workmanship and were related to construction errors and omissions. Typical defects were found to include incorrect installation, appearance defects, and missing an item or task mainly related to finishing and considered to be minor. No defects were caused by poor design because they are mainly detected and resolved during construction or become apparent after some years of use. This study demonstrates the negative impact of redoing defective work during the final stages of construction and provides knowledge to define measures to improve the quality of the finished buildings, such as understanding customer expectations and preferences, training programs for workers, specialization of subcontractors, and tightening external controls prior to handover.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asociación Española para la Calidad en la Edificación (ASECE). (2011). ¿Cómo está la calidad en la edificación en España? Madrid, Spain (in Spanish).
Atkinson, A. R. (1999). “The role of human error in construction defects.” Struct. Surv., 17(4), 231–236.
Auchterlounie, A., and Hinks, J. (2001). “Assessing customer criteria for quality in new housing.” 1st Post-Graduate Research Conf., Paper 2, Univ. of Salford, Manchester, U.K.
Auchterlounie, T. (2009). “Recurring quality issues in the UK private house building industry.” Struct. Surv., 27(3), 241–251.
Building Research Establishment (BRE). (1981). Quality control on building sites, Garston, U.K.
Burati, J. L., Farrington, J. J., and Ledbetter, W. B. (1992). “Causes of quality deviations in design and construction.” J. Constr. Eng. Manage., 118(1), 34–49.
Chew, M. Y. L. (2005). “Defect analysis in wet areas of buildings.” Construct. Build. Mater., 19(3), 165–173.
Chew, M. Y. L., and De Silva, N. (2003). “Maintainability problems of wet areas in high-rise residential buildings.” Build. Res. Inform., 31(1), 60–69.
Chong, W. K., and Low, S. P. (2005). “Assessment of defects at construction and occupancy stages.” J. Perform. Constr. Facil., 19(4), 283–289.
Chong, W. K., and Low, S. P. (2006). “Latent building defects: Causes and design strategies to prevent them.” J. Perform. Constr. Facil., 20(3), 213–221.
Craig, N., Sommerville, J., and Auchterlounie, T. (2010). “Customer satisfaction and snagging in the UK private house building sector.” Proc., 26th Annual ARCOM Conf., Association of Researchers in Construction Management (ARCOM), Leeds, U.K., 1199–1208.
Davis, K., Ledbetter, W. B., and Burati, J. L. (1989). “Measuring design and construction quality costs.” J. Constr. Eng. Manage., 115(3), 385–400.
Farrington, J. J. (1987). “A methodology to identify and categorize costs of quality deviations in design and construction.” Ph.D. thesis, Clemson Univ., Clemson, SC.
Forcada, N., Macarulla, M., and Love, P. E. D. (2013). “Assessment of residential defects at post-handover.” J. Constr. Eng. Manage, 139(4), 372–378.
Georgiou, J. (2010). “Verification of a building defect classification system for housing.” Struct. Surv., 28(5), 370–383.
Georgiou, J., Love, P. E. D., and Smith, J. (1999). “A comparison of defects in houses constructed by owners and registered builders in the Australian state of Victoria.” Struct. Surv., 17(3), 160–169.
Georgiou, J., Love, P. E. D., and Smith, J. (2000). “A review of builder registration in Victoria.” Struct. Surv., 18(1), 38–45.
Gobierno de España. (2008). Registro de empresas acreditadas 〈http://rea.mtin.gob.es/rea/〉 (Jan. 15, 2012).
Ilozor, B. D., Okoroh, M. I., Egbu, C. E., and Archicentre. (2004). “Understanding residential house defects in Australia from the state of Victoria.” Build. Environ., 39(3), 327–337.
Jefatura del Estado. (2006). Ley 32/2006, reguladora de la subcontratación en el sector de la construcción, Madrid, Spain.
Josephson, P. E., and Hammarlund, Y. (1999). “The causes and costs of defects in construction: A study of seven building projects.” Autom. Construct., 8(6), 681–687.
Kang, G. (2006). “The hierarchical structure of service quality, integration of technical and functional quality.” Manag. Serv. Qual., 16(1), 37–50.
Karim, K., Marosszeky, M., and Davis, S. (2006). “Managing subcontractor supply chain for quality in construction.” Eng. Construct. Architect. Manag., 13(1), 27–42.
Lopez, R., and Love, P. E. D. (2011). “Design error costs in construction projects.” J. Constr. Eng. Manage., 138(5), 585–593.
Love, P. E. D. (2002). “Influence of project type and procurement method on rework costs in building construction projects.” J. Constr. Eng. Manage., 128(1), 18–29.
Love, P. E. D. (2003). “A project management quality cost information system for the construction industry.” Inf. Manage., 40(7), 649–661.
Love, P. E. D., Davis, P. R., and Worrall, D. (2010). “Occupational licensing of building trades.” J. Prof. Issues Eng. Educ. Pract., 136(4), 215–223.
Love, P. E. D., and Edwards, D. J. (2004). “Forensic project management: The underlying causes of rework in construction projects.” Civ. Eng. Environ. Syst., 21(3), 207–228.
Love, P. E. D., and Edwards, D. J. (2005). “Calculating total rework costs in Australian construction projects.” Civ. Eng. Environ. Syst., 22(1), 11–27.
Love, P. E. D., Edwards, D. J., Irani, Z., and Goh, Y. M. (2011). “Dynamics of rework in complex offshore hydrocarbon projects.” J. Constr. Eng. Manage., 37(12), 1060–1070.
Love, P. E. D., and Li, H. (2000). “Quantifying the causes and costs of rework in construction.” Construct. Manag. Econ., 18(4), 479–490.
Love, P. E. D., and Sohal, A. S. (2003). “Capturing rework costs in projects.” Managerial Auditing J., 18(4), 329–339.
Mills, A., Love, P. E. D., and Williams, P. (2009). “Defect costs in residential construction.” J. Constr. Eng. Manage., 135(1), 12–16.
Ministerio de Vivienda. (2006). Código técnico de la edificación, 314/2006, Madrid, Spain.
Olubodun, F., and Mole, T. (1999). “Evaluation of defect influencing factors in public housing in the UK.” Struct. Surv., 17(3), 170–178.
Sommerville, J. (2007). “Defects and rework in new build: An analysis of the phenomenon and drivers.” Struct. Surv., 25(5), 391–407.
Sommerville, J., and McCosh, J. (2006). “Defects in new homes: An analysis of data on 1,696 new UK houses.” Struct. Surv., 24(1), 6–21.
Statistical Package for the Social Sciences (SPSS) 19.00 [Computer software]. East Markham, ON, Canada, IBM.
Stephenson, P., and Carrick, C. J. (2006). “Select and accept a new build home: Buyers’ experiences expectations and attitudes.” Proc., COBRA RICS Annual Conf., Royal Institution of Chartered Surveyors, London.
Tam, V. W. Y., Shen, L. Y., and Kong, J. S. Y. (2011). “Impacts of multi-layer chain subcontracting on project management performance.” Int. J. Proj. Manag., 29(1), 108–116.
Watt, D. S. (1999). Building pathology: Principles & practice, Blackwell Science, Oxford, U.K.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 24, 2012
Accepted: May 16, 2012
Published online: May 18, 2012
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.