Field Evaluation of Dynamic Compaction on Granular Deposits
Publication: Journal of Performance of Constructed Facilities
Volume 25, Issue 3
Abstract
The dynamic compaction (DC) method is a versatile ground treatment technique with growing popularity. It is applicable to a wide variety of soil types and conditions, particularly sandy materials and granular fills. This study presents a case history of the dynamic compaction with a high energy level of on granular deposits at a site in China. The reclaimed site featured loose backfill with heterogeneity and saturated silt. In order to properly deal with such soil conditions and to optimize the DC design, field tests were conducted to determine the influencing factors in DC. Deformation tests were performed to ascertain the rational spacing of impacts and the optimal number of drops and to provide proofs to the adjustment of the original DC procedure. Monitoring of the pore water pressure helped obtain the time delay between passes. The approach to assess the depth of improvement was discussed based on interpretations of the spectral analysis of surface waves (SASW) test. Analysis of the SASW and plate-load tests demonstrated significant improvement in the soils at the site, with no obvious weak layers. Following dynamic compaction, the allowable ground-bearing capacity and the depth of improvement at the site were no less than 270 kPa and 7.4 m, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to thank J. L. Zhan, J. L. Yang, and X. C. Cheng for their assistance in the field tests. Much of the work described in this paper was supported by the National Natural Science Foundation of China under Grant Nos. NNSFC50708079 and NNSFC40902079, the Research Fund for the Doctoral Program of Higher Education under Grant No. UNSPECIFIED20070247041, Shanghai Twilight Program under Grant No. UNSPECIFIED2007CG23, and the Kwang-Hua Fund for College of Civil Engineering, Tongji University. The writers would like to greatly acknowledge all these financial supports and express the most sincere gratitude.
References
Adam, D., Brandl, H., Kopf, F., and Paulmichl, I. (2007). “Heavy tamping integrated dynamic compaction control.” Ground Improv., 11(4), 237–243.
Arslan, H., Baykal, G., and Ertas, O. (2007). “Influence of tamper weight shape on dynamic compaction.” Ground Improv., 11(2), 61–66.
Chow, Y. K., Yong, D. M., Yong, K. Y., and Lee, S. L. (1992a). “Dynamic compaction analysis.” J. Geotech. Eng., 118(8), 1141–1157.
Chow, Y. K., Yong, D. M., Yong, K. Y., and Lee, S. L. (1992b). “Dynamic compaction of loose sand deposits.” Soils Found., 32(4), 93–106.
Chow, Y. K., Yong, D. M., Yong, K. Y., and Lee, S. L. (1994). “Dynamic compaction of loose granular soils: Effect of print spacing.” J. Geotech. Eng., 120(7), 1115–1133.
Deeks, A. J., and Randolph, M. F. (1995). “A simple model for inelastic footing response to transient loading.” Int. J. Numer. Anal. Meth. Geomech., 19(5), 307–329.
Feng, S. J., Shui, W. H., Gao, L. Y., He, L. J., and Tan, K. (2010). “Field studies of the effectiveness of dynamic compaction in coastal reclamation areas.” Bull. Eng. Geol. Environ., 69, 129–136.
Kumar, S., and Puri, V. K. (2001). “Soil improvement using heavy tamping—a case history.” ISET J. Earthq. Tech., 38(2-4), 123–133.
Leonards, G. A., Holtz, R. D., and Cutter, W. A. (1980). “Dynamic compaction of granular soils.” J. Geotech. Engrg. Div., 106(1), 35–44.
Lukas, R. G. (1980). “Densification of loose deposits by pounding.” J. Geotech. Engrg. Div., 106(4), 435–446.
Lukas, R. G. (1986). “Dynamic compaction for highway construction.” Design and construction guidelines, Rep. No. FHWA/RD-86/133, U.S. Federal Highway Administration, Washington, DC, Vol. 1, 204–219.
Mayne, P. W., and Jones, J. S., Jr. (1983). “Impact stresses during dynamic compaction.” J. Geotech. Eng., 109(10), 1342–1346.
Mayne, P. W., Jones, J. S., Jr., and Dumas, J. C. (1984). “Ground response to dynamic compaction.” J. Geotech. Eng., 110(6), 757–774.
Menard, L., and Broise, Y. (1975). “Theoretical and practical aspects of dynamic consolidation.” Géotechnique, 25(1), 3–18.
Miao, L. C., Chen, G., and Hong, Z. S. (2006). “Application of dynamic compaction in highway: a case study.” Geotech. Geol. Eng., 24, 91–99.
Mitchell, J. K., and Solymar, Z. V. (1984). “Time dependent strength gain in freshly deposited or densified sand.” J. Geotech. Eng., 110(11), 1559–1576.
Nazarian, S. (1984). “In situ determination of elastic moduli of soil deposits and pavement systems by spectral analysis of surface waves method.” Ph.D. dissertation, Univ. of Texas, Austin.
Pan, J. L., and Selby, A. R. (2002). “Simulation of dynamic compaction of loose granular soils.” Adv. Eng. Softw., 33(7-10), 631–640.
Poran, C. J., and Rodriguez, J. A. (1992). “Design of dynamic compaction.” Can. Geotech. J., 29(5), 796–802.
Roesset, J. H., Kausel, E., Cuellar, V., Monte, J. L., and Valerio, J. (1994). “Impact of weight falling onto the ground.” J. Geotech. Eng., 120(8), 1394–1412.
Shui, W. H. (2004). “Impact stress and series of experimental investigations of high energy level dynamic compaction.” Ph.D. dissertation, Tongji Univ., P.R. China (in Chinese).
Shui, W. H., Wang, T. H., and Wang, Y. L. (2006). “SPT for dynamic compaction with high energy on foundation backfilled with crushed stone.” Chin. J. Geotech. Eng., 28(10), 1309–1312 (in Chinese).
Thilakasiri, H. S., Gunaratne, M., Mullins, G., Stinnette, P., and Jory, B. (1996). “Investigation of impact stresses induced in laboratory dynamic compaction of soft soils.” Int. J. Numer. Anal. Meth. Geomech., 20(10), 753–767.
Van Impe, W. F., and Bouazza, A. (1996). “Densification of domestic waste fills by dynamic compaction.” Can. Geotech. J., 33, 879–887.
Zou, W. L., Wang, Z., and Yao, Z. F. (2005). “Effect of dynamic compaction on placement of high-road embankment.” J. Perform. Constr. Facil., 19(4), 316–323.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 10, 2009
Accepted: Jul 27, 2010
Published online: Jul 31, 2010
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.