Heat Activated SMA-CFRP Composites for Fatigue Strengthening of Cracked Steel Plates
Publication: Journal of Composites for Construction
Volume 24, Issue 6
Abstract
Many studies exist on carbon fiber-reinforced polymer (CFRP) strengthening of cracked steel details (e.g., cracks in riveted or welded bridge connections). The majority of these studies used CFRP sheets without prestressing. The efficiency of such systems for fatigue strengthening is often limited because the high strength of CFRP materials is not utilized under service loads. However, prestressing small CFRP sheets is very difficult and requires hydraulic jacks and mechanical clamps, which makes the strengthening process very complicated or even impossible. Therefore, in this study, NiTi shape memory alloy (NiTi-SMA) wires and CFRP sheets were used to produce a heat activated prestressed SMA-CFRP composite patch. This composite patch offers both the benefits of the prestress of SMA and the high elastic modulus of CFRP. The proposed patch is relatively small (300 × 45 mm) and can be prestressed, which makes it a good solution for the strengthening of cracked bridge connections, for example, welded connections. In this study, the composite patch is used to enhance the fatigue performance of central cracked steel plates. Because the SMA wires were small (1 mm in diameter), firstly 45 SMA wires were converted into a sheet of SMA strands and then embedded into multiple CFRP layers, forming an SMA-CFRP composite patch, which offers an easy manufacturing process. Eight central cracked steel plates were tested under cyclic loading. For the specimens strengthened by prestressed SMA-CFRP composites, the fatigue lives were extended to 2.7 times (with normal modulus CFRP) and 6 times (with high modulus CFRP), respectively. A finite element (FE) simulation was employed to better understand and interpret the test results. The decreased effective stress intensity factor (SIF) range was the reason for the prolonged fatigue life of the cracked specimens.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
This work was financially supported by the National Natural Science Foundation of China (Grant No. 51978509). Nippon Steel Chemical & Material is appreciated for donating materials used in this study. It is noted that all the names of the commercial products mentioned in this study are only stated for the sake of factual accuracy and shall not be interpreted as an endorsement of the products used.
References
Abdy, A. I., M. J. Hashemi, and R. Al-Mahaidi. 2018. “Fatigue life improvement of steel structures using self-prestressing CFRP/SMA hybrid composite patches.” Eng. Struct. 174: 358–372. https://doi.org/10.1016/j.engstruct.2018.07.072.
Aljabar, N. J., X. L. Zhao, R. Al-Mahaidi, E. Ghafoori, M. Motavalli, and Y. C. Koay. 2017. “Fatigue tests on UHM-CFRP strengthened steel plates with central inclined cracks under different damage levels.” Compos. Struct. 160: 995–1006. https://doi.org/10.1016/j.compstruct.2016.10.122.
BSI (British Standards Institution). 2005. Guide to methods for assessing the acceptability of flaws in metallic structures. BS 7910. London: BSI.
CEN (European Committee for Standardization). 2005. Design of steel structures. Part 1-9: Fatigue. Eurocode 3. EN 1993-1-9. Brussels, Belgium: CEN.
Chen, T., X. L. Gu, M. Qi, and Q. Q. Yu. 2018a. “Experimental study on fatigue behavior of cracked rectangular hollow-section steel beams repaired with prestressed CFRP plates.” J. Compos. Constr. 22 (5): 04018034. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000872.
Chen, T., L. Hu, N. X. Zhang, and Q. Q. Yu. 2018b. “Boundary element analysis of fatigue behavior for CFRP-strengthened steel plates with center inclined cracks.” Thin-Walled Struct. 125: 164–171. https://doi.org/10.1016/j.tws.2018.01.028.
Chen, T., L. Li, N. Zhang, X. Song, and Y. Hidekuma. 2018c. “Fatigue performance test on inclined central cracked steel plates repaired with CFRP strand sheets.” Thin-Walled Struct. 130: 414–423. https://doi.org/10.1016/j.tws.2018.06.004.
Chen, T., X. Wang, and M. Qi. 2018d. “Fatigue improvements of cracked rectangular hollow section steel beams strengthened with CFRP plates.” Thin-Walled Struct. 122: 371–377. https://doi.org/10.1016/j.tws.2017.10.019.
Choi, E., S.-C. Cho, J. W. Hu, and T.-S. Park. 2010. “Recovery and residual stress of SMA wires and applications for concrete structures.” Smart Mater. Struct. 19 (9): 094013. https://doi.org/10.1088/0964-1726/19/9/094013.
Choi, E., Y.-S. Chung, D.-H. Choi, and R. DesRoches. 2012. “Seismic protection of lap-spliced RC columns using SMA wire jackets.” Mag. Concr. Res. 64 (3): 239–252. https://doi.org/10.1680/macr.10.00181.
Chue, C. H., L. C. Chang, and J. S. Tsai. 1994. “Bonded repair of a plate with inclined central crack under biaxial loading.” Compos. Struct. 28 (1): 39–45. https://doi.org/10.1016/0263-8223(94)90004-3.
Cladera, A., B. Weber, C. Leinenbach, C. Czaderski, M. Shahverdi, and M. Motavalli. 2014. “Iron-based shape memory alloys for civil engineering structures: An overview.” Constr. Build. Mater. 63: 281–293. https://doi.org/10.1016/j.conbuildmat.2014.04.032.
Colombi, P., and G. Fava. 2015. “Experimental study on the fatigue behaviour of cracked steel beams repaired with CFRP plates.” Eng. Fract. Mech. 145: 128–142. https://doi.org/10.1016/j.engfracmech.2015.04.009.
Colombi, P., G. Fava, and L. Sonzogni. 2015. “Fatigue crack growth in CFRP-strengthened steel plates.” Composites, Part B 72: 87–96. https://doi.org/10.1016/j.compositesb.2014.11.036.
Dawood, M., M. W. El-Tahan, and B. Zheng. 2015. “Bond behavior of superelastic shape memory alloys to carbon fiber reinforced polymer composites.” Composites, Part B 77: 238–247. https://doi.org/10.1016/j.compositesb.2015.03.043.
Dawood, M., M. Guddati, and S. Rizkalla. 2007. “Bond behavior of a CFRP strengthening system for steel structures.” In Asia-Pacific Conf. on FRP in Structures, 959–966. International Institute for FRP in Construction.
El-Tahan, M., and M. Dawood. 2016. “Fatigue behavior of a thermally-activated NiTiNb SMA-FRP patch.” Smart Mater. Struct. 25 (1): 015030. https://doi.org/10.1088/0964-1726/25/1/015030.
El-Tahan, M., M. Dawood, and G. Song. 2015. “Development of a self-stressing NiTiNb shape memory alloy (SMA)/fiber reinforced polymer (FRP) patch.” Smart Mater. Struct. 24 (6): 065035. https://doi.org/10.1088/0964-1726/24/6/065035.
Emdad, R., and R. Al-Mahaidi. 2015. “Effect of prestressed CFRP patches on crack growth of centre-notched steel plates.” Compos. Struct. 123: 109–122. https://doi.org/10.1016/j.compstruct.2014.12.007.
Fawzia, S., R. Al-Mahaidi, and X. L. Zhao. 2006. “Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP.” Compos. Struct. 75 (1–4): 156–162. https://doi.org/10.1016/j.compstruct.2006.04.038.
Fritsch, E., M. Izadi, and E. Ghafoori. 2019. “Development of nail-anchor strengthening system with iron-based shape memory alloy (Fe-SMA) strips.” Constr. Build. Mater. 229: 117042. https://doi.org/10.1016/j.conbuildmat.2019.117042.
Ghafoori, E., E. Hosseini, C. Leinenbach, J. Michels, and M. Motavalli. 2017. “Fatigue behavior of a Fe-Mn-Si shape memory alloy used for prestressed strengthening.” Mater. Des. 133: 349–362. https://doi.org/10.1016/j.matdes.2017.07.055.
Ghafoori, E., M. Neuenschwander, M. Shahverdi, C. Czaderski, and M. Fontana. 2019. “Elevated temperature behavior of an iron-based shape memory alloy used for prestressed strengthening of civil structures.” Constr. Build. Mater. 211: 437–452. https://doi.org/10.1016/j.conbuildmat.2019.03.098.
Gholampour, A., and T. Ozbakkaloglu. 2018. “Understanding the compressive behavior of shape memory alloy (SMA)-confined normal- and high-strength concrete.” Compos. Struct. 202: 943–953. https://doi.org/10.1016/j.compstruct.2018.05.008.
Hosseini, A., E. Ghafoori, M. Motavalli, A. Nussbaumer, and X. L. Zhao. 2017. “Mode I fatigue crack arrest in tensile steel members using prestressed CFRP plates.” Compos. Struct. 178: 119–134. https://doi.org/10.1016/j.compstruct.2017.06.056.
Hosseini, A., J. Michels, M. Izadi, and E. Ghafoori. 2019a. “A comparative study between Fe-SMA and CFRP reinforcements for prestressed strengthening of metallic structures.” Constr. Build. Mater. 226: 976–992. https://doi.org/10.1016/j.conbuildmat.2019.07.169.
Hosseini, A., A. Nussbaumer, M. Motavalli, X. L. Zhao, and E. Ghafoori. 2019b. “Mixed mode I/II fatigue crack arrest in steel members using prestressed CFRP reinforcement.” Int. J. Fatigue 127: 345–361. https://doi.org/10.1016/j.ijfatigue.2019.06.020.
Hosseini, E., E. Ghafoori, C. Leinenbach, M. Motavalli, and S. R. Holdsworth. 2018. “Stress recovery and cyclic behaviour of an Fe–Mn–Si shape memory alloy after multiple thermal activation.” Smart Mater. Struct. 27 (2): 025009. https://doi.org/10.1088/1361-665X/aaa2c9.
Huawen, Y., C. König, T. Ummenhofer, Q. Shizhong, and R. Plum. 2010. “Fatigue performance of tension steel plates strengthened with prestressed CFRP laminates.” J. Compos. Constr. 14 (5): 609–615. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000111.
Izadi, M., A. Hosseini, J. Michels, M. Motavalli, and E. Ghafoori. 2019. “Thermally activated iron-based shape memory alloy for strengthening metallic girders.” Thin-Walled Struct. 141: 389–401. https://doi.org/10.1016/j.tws.2019.04.036.
Izadi, M. R., E. Ghafoori, M. Motavalli, and S. Maalek. 2018a. “Iron-based shape memory alloy for the fatigue strengthening of cracked steel plates: Effects of re-activations and loading frequencies.” Eng. Struct. 176: 953–967. https://doi.org/10.1016/j.engstruct.2018.09.021.
Izadi, M. R., E. Ghafoori, M. Shahverdi, M. Motavalli, and S. Maalek. 2018b. “Development of an iron-based shape memory alloy (Fe-SMA) strengthening system for steel plates.” Eng. Struct. 174: 433–446. https://doi.org/10.1016/j.engstruct.2018.07.073.
Jang, B. K., and T. Kishi. 2005. “Adhesive strength between TiNi fibers embedded in CFRP composites.” Mater. Lett. 59 (11): 1338–1341. https://doi.org/10.1016/j.matlet.2005.01.006.
Jonnalagadda, K., G. E. Kline, and N. R. Sottos. 1997. “Local displacements and load transfer in shape memory alloy composites.” Exp. Mech. 37 (1): 78–86. https://doi.org/10.1007/BF02328753.
Lau, K. t., W. y. Tam, X. l. Meng, and L. m. Zhou. 2002. “Morphological study on twisted NiTi wires for smart composite systems.” Mater. Lett. 57 (2): 364–368. https://doi.org/10.1016/S0167-577X(02)00793-0.
Lee, I., J. H. O. Roh, S. M. Yang, and J. H. Han. 2005. “Shape and vibration control of smart composite structures.” Adv. Compos. Mater 14 (2): 121–130. https://doi.org/10.1163/1568551053970690.
Li, L., T. Chen, and N. Zhang. 2019a. “Numerical analysis of fatigue performance of CFRP–repaired steel plates with central inclined cracks.” Eng. Struct. 185: 194–202. https://doi.org/10.1016/j.engstruct.2019.01.128.
Li, L., T. Chen, N. Zhang, and Y. Hidekuma. 2019b. “Test on fatigue repair of central inclined cracked steel plates using different adhesives and CFRP, prestressed and non-prestressed.” Compos. Struct. 216: 350–359. https://doi.org/10.1016/j.compstruct.2019.03.012.
Liu, H., R. Al-Mahaidi, and X. L. Zhao. 2009a. “Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures.” Compos. Struct. 90 (1): 12–20. https://doi.org/10.1016/j.compstruct.2009.02.016.
Liu, H., Z. Xiao, X. L. Zhao, and R. Al-Mahaidi. 2009b. “Prediction of fatigue life for CFRP-strengthened steel plates.” Thin-Walled Struct. 47 (10): 1069–1077. https://doi.org/10.1016/j.tws.2008.10.011.
Liu, R., T. Chen, L. Li, and K. Tateishi. 2019. “A practical stress intensity factor formula for CFRP-repaired steel plates with a central crack.” J. Constr. Steel Res. 162: 105755. https://doi.org/10.1016/j.jcsr.2019.105755.
Mohd Jani, J., M. Leary, A. Subic, and M. A. Gibson. 2014. “A review of shape memory alloy research, applications and opportunities.” Mater. Des. 56: 1078–1113. https://doi.org/10.1016/j.matdes.2013.11.084.
Nippon Steel. 2016. “Test report.” [In Japanese.].
Nippon Steel. 2019. “Type and performance for CFRP material.” [In Japanese.] Accessed June, 2018. https://www.nscm.nipponsteel.com/carbon/pdf/6_forca_tousheet_performance_20180922.pdf.
Paris, P., and F. Erdogan. 1963. “A critical analysis of crack propagation laws.” J. Basic Eng. 85 (4): 528–533. https://doi.org/10.1115/1.3656900.
Schranz, B., J. Michels, M. Shahverdi, and C. Czaderski. 2019. “Strengthening of concrete structures with iron-based shape memory alloy elements: Case studies.” In Proc., 5th Conf. on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, 1–8. Germany: Bundesanstalt für Materialforschung und -prüfung (BAM).
Shahverdi, M., C. Czaderski, and M. Motavalli. 2016. “Iron-based shape memory alloys for prestressed near-surface mounted strengthening of reinforced concrete beams.” Constr. Build. Mater. 112: 28–38. https://doi.org/10.1016/j.conbuildmat.2016.02.174.
Shin, M., and B. Andrawes. 2010. “Experimental investigation of actively confined concrete using shape memory alloys.” Eng. Struct. 32 (3): 656–664. https://doi.org/10.1016/j.engstruct.2009.11.012.
Soroushian, P., K. Ostowari, A. Nossoni, and H. Chowdhury. 2001. “Repair and strengthening of concrete structures through application of corrective posttensioning forces with shape memory alloys.” Transp. Res. Rec. 1770 (1): 20–26. https://doi.org/10.3141/1770-03.
Täljsten, B., C. S. Hansen, and J. W. Schmidt. 2009. “Strengthening of old metallic structures in fatigue with prestressed and non-prestressed CFRP laminates.” Constr. Build. Mater. 23 (4): 1665–1677. https://doi.org/10.1016/j.conbuildmat.2008.08.001.
Toray Industries. n.d. “Technical data sheet for Torayca cloth.” Accessed June, 2018. https://www.torayca.com/en/download/pdf/cloth.pdf.
Tran, H., X. Balandraud, and J. F. Destrebecq. 2015. “Improvement of the mechanical performances of concrete cylinders confined actively or passively by means of SMA wires.” Arch. Civ. Mech. Eng. 15 (1): 292–299. https://doi.org/10.1016/j.acme.2014.04.009.
Tsoi, K. A., J. Schrooten, Y. Zheng, and R. Stalmans. 2004. “Part II. Thermomechanical characteristics of shape memory alloy composites.” Mater. Sci. Eng. A 368 (1–2): 299–310. https://doi.org/10.1016/j.msea.2003.11.007.
Wilkes, K. E., and P. K. Liaw. 2000. “Fatigue behavior of shape-memory alloys.” JOM 52 (10): 45–51. https://doi.org/10.1007/s11837-000-0083-3.
Yu, Q. Q., T. Chen, X. L. Gu, X. L. Zhao, and Z. G. Xiao. 2013. “Fatigue behaviour of CFRP strengthened steel plates with different degrees of damage.” Thin-Walled Struct. 69: 10–17. https://doi.org/10.1016/j.tws.2013.03.012.
Yu, Q. Q., X. L. Zhao, R. Al-Mahaidi, Z. G. Xiao, T. Chen, and X. L. Gu. 2014. “Tests on cracked steel plates with different damage levels strengthened by CFRP laminates.” Int. J. Struct. Stab. Dyn. 14 (6): 1450018. https://doi.org/10.1142/S0219455414500187.
Yuan, G., Y. Bai, Z. Jia, D. Hui, and K. t. Lau. 2016. “Enhancement of interfacial bonding strength of SMA smart composites by using mechanical indented method.” Composites, Part B 106: 99–106. https://doi.org/10.1016/j.compositesb.2016.08.033.
Zhao, X. L., T. Wilkinson, and G. Hancock. 2005. Cold-formed tubular members and connections. Amsterdam, Netherlands: Elsevier.
Zheng, B., and M. Dawood. 2017. “Fatigue strengthening of metallic structures with a thermally activated shape memory alloy fiber-reinforced polymer patch.” J. Compos. Constr. 21 (4): 04016113. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000776.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: May 10, 2020
Accepted: Jun 9, 2020
Published online: Aug 18, 2020
Published in print: Dec 1, 2020
Discussion open until: Jan 18, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.