Reinforced Concrete Shear Walls Detailed with Innovative Materials: Seismic Performance
Publication: Journal of Composites for Construction
Volume 22, Issue 6
Abstract
This paper presents the experimental results of a pilot study performed on the seismic performance of three types of damage-resistant, slender reinforced concrete (RC) shear walls. The study explores three innovative schemes for the mitigation of postearthquake damage, including permanent lateral deformation and concrete damage, in RC shear walls. Each innovative shear wall had an aspect ratio of 2.0 and was reinforced with a hybrid reinforcing system consisting of mild steel and a type of self-centering reinforcement such as shape memory alloy bars, glass fiber reinforced polymer bars, or high-strength steel strands. To mitigate concrete damage, the walls were detailed with fiber reinforced cementitious composites, either engineered cementitious composite or steel fiber reinforced concrete. The specimens were supported as cantilevers, and then were tested up to failure under pseudo-static, cyclic loads. As test results showed, the innovative shear walls had smaller residual drift ratios and mitigated damage with respect to a conventional RC shear wall. The innovative walls also showed significant levels of energy dissipation and ductility throughout testing.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdulridha, A., and D. Palermo. 2014. “Response of a hybrid-SMA reinforced concrete shear wall.” In Proc., 10th US National Conf. on Earthquake Engineering: Frontiers of Earthquake Engineering. Anchorage, AK.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318-14. Farmington Hills, MI: ACI.
Alam, M. S., M. Moni, and S. Tesfamariam. 2012. “Seismic overstrength and ductility of concrete buildings reinforced with superelastic shape memory alloy rebar.” Eng. Struct. 34 (1): 8–20. https://doi.org/10.1016/j.engstruct.2011.08.030.
Alam, M. S., M. Nehdi, and M. A. Youssef. 2009. “Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys.” Smart Struct. Syst. 5 (5): 565–585. https://doi.org/10.12989/sss.2009.5.5.565.
ASTM. 2014a. Standard test method for tension testing of nickel-titanium superelastic materials. ASTM F2516. West Conshohocken, PA: ASTM.
ASTM. 2014b. Standard test methods and definitions for mechanical testing of steel products. ASTM A370. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M. West Conshohocken, PA: ASTM.
ATC (Applied Technology Council). 1992. Guidelines for cyclic seismic testing of components of steel structures. ACI 24. Redwood City, CA: ATC.
Choi, J., and B. Y. Lee. 2015. “Bonding properties of basalt fiber and strength reduction according to fiber orientation.” Materials 8 (10): 6719–6727. https://doi.org/10.3390/ma8105335.
CPCI (Canadian Precast/Prestressed Concrete Institute). 2007. CPCI design 4. Ottawa, ON: CPCI.
Cruz Noguez, C. A., and M. S. Saiidi. 2012. “Shake-table studies of a four-span bridge model with advanced materials.” J. Struct. Eng. 138 (2): 183–192. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000457.
CSA (Canadian Standards Association). 2012. Design and construction of building structures with fibre-reinforced polymers. CSA S806. Mississauga, ON, Canada: CSA.
CSA (Canadian Standards Association). 2014. Design of concrete structures. CSA A23.3. Mississauga, ON, Canada: CSA.
FEMA. 1997. NEHRP guidelines for the seismic rehabilitation of buildings. FEMA 273. Washington, DC: FEMA.
FEMA. 2000. Prestandard and commentary for the seismic rehabilitation of buildings. FEMA 356. Washington, DC: FEMA.
fib (Fédération Internationale du Béton). 2013. fib model code for concrete structures 2010. Lausanne, Switzerland: fib.
Hidalgo, P. A., C. A. Ledezma, and R. M. Jordan. 2002. “Seismic behavior of squat reinforced concrete shear walls.” Earthquake Spectra 18 (2): 287–308. https://doi.org/10.1193/1.1490353.
Holden, T., J. Restrepo, and J. B. Mander. 2003. “Seismic performance of precast reinforced and prestressed concrete walls.” J. Struct. Eng. 129 (3): 286–296. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(286).
Mohamed, N., A. Sabry Farghaly, B. Benmokrane, and K. W. Neale. 2014. “Experimental investigation of concrete shear walls reinforced with glass fiber-reinforced bars under lateral cyclic loading.” J. Compos. Constr. 18 (3): A4014001. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000393.
Park, R. 1988. “Ductility evaluation from laboratory and analytical testing.” In Proc., 9th World Conf. on Earthquake Engineering, 605–616. Kanpur, India: Indian Institute of Technology Kanpur.
Saiidi, M. S., M. O’Brien, and M. Sadrossadat-Zadeh. 2009. “Cyclic response of concrete bridge columns using superelastic nitinol and bendable concrete.” ACI Struct. J. 106 (1): 69–77.
Saiidi, M. S., and H. Wang. 2006. “Exploratory study of seismic response of concrete columns with shape memory alloys reinforcement.” ACI Struct. J. 103 (3): 435–442.
Sakai, J., and S. Mahin. 2004. “Mitigation of residual displacements of circular reinforced concrete bridge columns.” In Proc., 13th World Conf. on Earthquake Engineering, 1–13. Kanpur, India: Indian Institute of Technology Kanpur.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 23, 2017
Accepted: Jun 8, 2018
Published online: Sep 17, 2018
Published in print: Dec 1, 2018
Discussion open until: Feb 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.