Cathodic Protection for Steel Beams Strengthened with CFRP Sheets
Publication: Journal of Composites for Construction
Volume 22, Issue 6
Abstract
This paper presents the potential of cathodic protection for steel beams strengthened with carbon fiber reinforced polymer (CFRP) sheets. A conceptual experimental program is conducted with 19 strengthened beams. Sacrificial anodes are employed to mitigate the initiation and progression of corrosion, which lead to three test categories: unprotected, protected with zinc coins, and protected with zinc spray. A comparative assessment is reported on the behavior of the beams subjected to an accelerated corrosion protocol with an NaCl-based electrolyte solution for up to 144 h, including an unconditioned control beam. Material testing indicates that the strength of the epoxy adhesive bonding the CFRP to steel substrates is preserved, whereas the fiber-resin interface of the CFRP is deteriorated by the electrolyte. The cathodic protection improves the flexural behavior of the conditioned beams in terms of load-carrying capacity, yield characteristics, and ductility. Protection limits beyond which the efficacy of the zinc anodes diminishes are noticed. According to reliability investigations, the safety index of the strengthened beams is reduced due to corrosion damage (the accelerated corrosion degrades the CFRP-steel interface); however, the presence of cathodic protection retards the degree of reduction. A fuzzy-logic model is developed to address the intrinsic uncertainty of corrosion and is used to propose design recommendations for CFRP-strengthened steel beams with cathodic protection.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge support from the U.S. Department of Transportation through the Mountain-Plains Consortium Program. To avoid commercialism, proprietary information such as manufacturers and product names was not included.
References
AASHTO. 2016. AASHTO LRFD bridge design specifications. 7th ed. Washington, DC: AASHTO.
Ahmad, Z. 2006. Principles of corrosion engineering and corrosion control. Oxford, UK: Butterworth Heinemann.
ASTM. 2011. Standard practice for preparing, cleaning, and evaluating corrosion test specimens. ASTM G01-03. West Conshohocken, PA: ASTM.
Chakraverty, A. P., U. K. Mohanty, S. C. Mishra, and A. Satapathy. 2015. “Sea water ageing of GFRP composites and the dissolved salts.” In Vol. 75 of Proc., 4th National Conf. on Processing and Characterizing of Materials, 012029. Bristol, UK: IOP Publishing.
Damgaard, N., S. Walbridge, C. Hansson, and J. Yeung. 2010. “Corrosion protection and assessment of weathering steel highway structures.” J. Constr. Steel Res. 66 (10): 1174–1185. https://doi.org/10.1016/j.jcsr.2010.04.012.
Dawood, M., and S. Rizkalla. 2010. “Environmental durability of a CFRP system for strengthening steel structures.” Constr. Build. Mater. 24 (9): 1682–1689. https://doi.org/10.1016/j.conbuildmat.2010.02.023.
FHWA (Federal Highway Administration). 2013. Bridges and structures. Washington, DC: FHWA.
Gholami, M., A. R. M. Sam, J. M. Yatim, and M. M. Tahir. 2013. “A review on steel/CFRP strengthening systems focusing environmental performance.” Constr. Build. Mater. 47: 301–310. https://doi.org/10.1016/j.conbuildmat.2013.04.049.
Heshmati, M., R. Haghani, and M. Al-Emrani. 2015. “Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art.” Compos. Part B: Eng. 81: 259–275. https://doi.org/10.1016/j.compositesb.2015.07.014.
Kabir, M. H., S. Fawzia, T. H. T. Chan, and M. Badawi. 2017. “Durability of CFRP strengthened steel circular hollow section member exposed to sea water.” Constr. Build. Mater. 118: 216–225. https://doi.org/10.1016/j.conbuildmat.2016.04.087.
Kahraman, R., and M. Al-Harthi. 2005. “Moisture diffusion into aluminum powder-filled epoxy adhesive in sodium chloride solutions.” Int. J. Adhes. Adhes. 25 (4): 337–341. https://doi.org/10.1016/j.ijadhadh.2004.10.003.
McCafferty, E. 2010. Introduction to corrosion science. New York: Springer.
Melchers, R. E. 2013. “Long-term corrosion of cast irons and steel in marine and atmospheric environments.” Corros. Sci. 68: 186–194. https://doi.org/10.1016/j.corsci.2012.11.014.
Mendel, J. M. 1995. “Fuzzy logic systems for engineering: A tutorial.” Proc. IEEE 83 (3): 345–377. https://doi.org/10.1109/5.364485.
Mizumoto, M. 1988. “Fuzzy controls under various fuzzy reasoning methods.” Inf. Sci. 45 (2): 129–151. https://doi.org/10.1016/0020-0255(88)90037-0.
NACE International. 2016. International measures of prevention, application, and economics of corrosion technologies study. Houston: NACE International.
Nguyen, T.-C., Y. Bai, X.-L. Zhao, and R. Al-Mahaidi. 2012. “Durability of steel/CFRP double strap joints exposed to sea water, cyclic temperature and humidity.” Compos. Struct. 94 (5): 1834–1845. https://doi.org/10.1016/j.compstruct.2012.01.004.
Nowak, A. J. 1993. Calibration of LRFD bridge design code (NCHRP 12-33). Washington, DC: Transportation Research Board.
Ocon, P., A. B. Crisobal, P. Herrasti, and E. Fatas. 2005. “Corrosion performance of conducting polymer coatings applied on mild steel.” Corros. Sci. 47 (3): 649–662. https://doi.org/10.1016/j.corsci.2004.07.005.
Sergi, G. 2011. “Ten-year results of galvanic sacrificial anodes in steel reinforced concrete.” Mater. Corros. 62 (2): 98–104. https://doi.org/10.1002/maco.201005707.
Shepard, R. B. 2005. Quantifying environmental impact assessments using fuzzy logic. Berlin: Springer.
Tavakolizadeh, M., and H. Saadatmanesh. 2001. “Galvanic corrosion of carbon and steel in aggressive environment.” J. Compos. Constr. 5 (3): 200–210. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:3(200).
Teng, J. G., T. Yu, and D. Fernando. 2012. “Strengthening of steel structures with fiber-reinforced polymer composites.” J. Constr. Steel Res. 78: 131–143. https://doi.org/10.1016/j.jcsr.2012.06.011.
Wu, B., S. Zhang, F. Liu, and T. Gan. 2016. “Effects of salt solution on mechanical behaviors of aramid fiber-reinforced polymer (AFRP) sheets and AFRP-to-concrete joints.” Adv. Struct. Eng. 19 (12): 1855–1872. https://doi.org/10.1177/1369433216649389.
Yang, Q., G. Xian, and V. M. Karbhari. 2008. “Hygrothermal ageing of an epoxy adhesive used in FRP strengthening of concrete.” J. Appl. Polym. Sci. 107 (4): 2607–2617. https://doi.org/10.1002/app.27287.
Zadeh, L. A. 1965. “Fuzzy sets.” Inf. Control 8 (3): 338–353. https://doi.org/10.1016/S0019-9958(65)90241-X.
Zhao, X.-L., and L. Zhang. 2007. “State-of-the-art review on FRP strengthened steel structures.” Eng. Struct. 29 (8): 1808–1823. https://doi.org/10.1016/j.engstruct.2006.10.006.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 14, 2017
Accepted: Jun 4, 2018
Published online: Sep 7, 2018
Published in print: Dec 1, 2018
Discussion open until: Feb 7, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.