Stress–Strain Modeling of Concrete Columns with Localized Failure: An Analytical Study
Publication: Journal of Composites for Construction
Volume 20, Issue 3
Abstract
Axially-loaded concrete columns with postpeak strain-softening suffer large inelastic deformation only in a localized failure zone, leading to nonuniform deformation along the height of the columns. Therefore, calculation of axial deformation of such a column is more complicated and involves the concept of compressive fracture energy. No model of compressive fracture energy and the relevant stress–strain relationship has been developed in the literature for fiber-reinforced polymer (FRP) confined concrete columns. Different definitions of the fracture energy have been adopted in extant literature, which has caused inconsistency and difficulty in application of the models. This analytical study involves the development of a more rational and general framework for stress–strain modeling of axially-loaded concrete columns involving failure localization. Modeling of the postpeak inelastic deformation and its associated compressive fracture energy is studied and its parameters are scrutinized and evaluated. A unified relationship is formed to relate different definitions of the fracture energy so that they can be compared with each other. The new stress–strain model shows good agreement with experimental results, and can be used for design of axially-loaded FRP-confined concrete columns.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was fully supported by a grant from CityU (Project No. 7004179) and the National Natural Science Foundation of China (Grant No. 51378449).
References
Akiyama, M., Suzuki, M., and Frangopol, D. M. (2010). “Stress-averaged strain model for confined high-strength concrete.” ACI Struct. J., 107(2), 179–188.
Attard, M. M., and Setunge, S. (1996). “Stress-strain relationship of confined and unconfined concrete.” ACI Mater. J., 93(5), 432–442.
Binici, B. (2005). “An analytical model for stress-strain behavior of confined concrete.” Eng. Struct., 27(7), 1040–1051.
Gambarelli, S., Nisticò, N., and Ožbolt, J. (2014). “Numerical analysis of compressed concrete columns confined with CFRP: Microplane-based approach.” Compos. Part B: Eng., 67, 303–312.
Hurlbut, B. J. (1985). Experimental and computational investigation of strain-softening in concrete, Univ. of Colorado, Boulder, CO.
Ilki, A., Peker, O., Karamuk, E., Demir, C., and Kumbasar, N. (2008). “FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns.” J. Mater. Civ. Eng., 169–188.
Jansen, D. C., and Shah, S. P. (1997). “Effect of length on compressive strain softening of concrete.” J. Eng. Mech., 25–35.
Jiang, J. F., and Wu, Y. F. (2015). “Plasticity-based criterion for confinement design of FRP jacketed concrete columns.” Mater. Struct., 1–17.
Lertsrisakulrat, T., Watanabe, K., Matsuo, M., and Niwa, J. (2001). “Experimental study on parameters in localization of concrete subjected to compression.” J. Mater. Concr. Struct. Pavements, 50(669), 309–321.
Lubliner, J., Oliver, J., Oller, S., and Oñate, E. (1989). “A plastic-damage model for concrete.” Int. J. Solids Struct., 25(3), 299–326.
Mander, J., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 1804–1826.
Markeset, G., and Hillerborg, A. (1995). “Softening of concrete in compression—Localization and size effects.” Cem. Concr. Res., 25(4), 702–708.
Nakamura, H., and Higai, T. (2001). “Compressive fracture energy and fracture zone length of concrete.” Modeling of Inelastic Behavior of RC Structures under Seismic Loads, ASCE, Reston, VA, 471–487.
Nisticò, N. (2014). “RC square sections confined by FRP: A numerical procedure for predicting stress-strain relationships.” Compos. Part B: Eng., 59, 238–247.
Nisticò, N., and Monti, G. (2013). “RC square sections confined by FRP: Analytical prediction of peak strength.” Compos. Part B: Eng., 45(1), 127–137.
Nisticò, N., Pallini, F., Rousakis, T., Wu, Y. F., and Karabinis, A. (2014). “Peak strength and ultimate strain prediction for FRP confined square and circular concrete sections.” Compos. Part B: Eng., 67, 543–554.
Palermo, D., and Vecchio, F. J. (2003). “Compression field modeling of reinforced concrete subjected to reversed loading: Formulation.” ACI Struct. J., 100(5), 616–625.
Popovics, S. (1973). “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res., 3(5), 583–599.
Richard, R. M., and Abbott, B. J. (1975). “Versatile elastic-plastic stress-strain formula.” J. Eng. Mech. Div., 101(4), 511–515.
Rokugo, K., and Koyanagi, W. (1992). “Role of compressive fracture energy of concrete on the failure behaviour of reinforced concrete beams.” Application of fracture mechanics to reinforced concrete, A. Carpenteri, ed., Elsevier Applied Science, Turin, Italy, 437–464.
Samani, A. K., and Attard, M. M. (2012). “A stress-strain model for uniaxial and confined concrete under compression.” Eng. Struct., 41, 335–349.
Sargin, M. (1971). “Stress-strain relationships for concrete and the analysis of structural concrete sections.” Solid Mechanics Division, Univ. of Waterloo, ON, Canada.
Shah, S., and Sankar, R. (1987). “Internal cracking and strain softening response of concrete under uniaxial compression.” ACI Mater. J., 84(3), 200–212.
Smith, S. S., Willam, K. J., Gerstle, K. H., and Sture, S. (1989). “Concrete over the top—Or, is there life after peak?” ACI Mater. J., 86(5), 491–497.
Teng, J. G., Jiang, T., Lam, L., and Luo, Y. Z. (2009). “Refinement of a design-oriented stress-strain model for FRP-confined concrete.” J. Compos. Constr., 269–278.
Torrenti, J., Benaija, E., and Boulay, C. (1993). “Influence of boundary conditions on strain softening in concrete compression test.” J. Eng. Mech., 2369–2384.
Vonk, R. A. (1992). “Softening of concrete loading in compression.” Ph.D. thesis, Eindhoven Univ. of Technology, Eindhoven, Netherlands.
Wang, L. M., and Wu, Y. F. (2008). “Effect of corner radius on the performance of CFRP-confined square concrete columns: Test.” Eng. Struct., 30(2), 493–505.
Watanabe, K., Niwa, J., Yokota, H., and Iwanami, M. (2004). “Experimental study on stress-strain curve of concrete considering localized failure in compression.” J. Adv. Concr. Technol., 2(3), 395–407.
Wei, Y. Y., and Wu, Y. F. (2012). “Unified stress-strain model of concrete for FRP-confined columns.” Constr. Build. Mater., 26(1), 381–392.
Weibull, W. (1951). “A statistical distribution function of wide applicability.” J. Appl. Mech., 18(3), 293–297.
Wu, G., Lu, Z. T., and Wu, Z. S. (2006). “Strength and ductility of concrete cylinders confined with FRP composites.” Constr. Build. Mater., 20(3), 134–148.
Wu, Y. F., and Jiang, J. F. (2013). “Effective strain of FRP for confined circular concrete columns.” Compos. Struct., 95, 479–491.
Wu, Y. F., and Wang, L. M. (2009). “Unified strength model for square and circular concrete columns confined by external jacket.” J. Struct. Eng., 253–261.
Wu, Y. F., and Wei, Y. (2014). “General stress-strain model for steel- and FRP-confined concrete.” J. Compos. Constr., 04014069.
Wu, Y. F., and Wei, Y. Y. (2010). “Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns.” Eng. Struct., 32(1), 32–45.
Wu, Y. F., and Zhou, Y. W. (2010). “Unified strength model based on Hoek-Brown failure criterion for circular and square concrete columns confined by FRP.” J. Compos. Constr., 175–184.
Xie, J., Elwi, A., and MacGregor, J. (1995). “Mechanical properties of three high-strength concretes containing silica fume.” ACI Mater. J., 92(2), 135–145.
Xing, Q. S., Weng, Y. J., and Shen, J. M. (1987). “Experimental study on the complete stress strain curve of confined concrete.” Proc., National. Conf. on Application and Theory of Common and Confined Concrete, Architectural Society of China and Dept. of Civil Engineering, Tsinghua Univ., Beijing, 81–87.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 15, 2015
Accepted: Aug 25, 2015
Published online: Oct 26, 2015
Discussion open until: Mar 26, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.