Damage Assessment of Simply Supported Double-Pier Bent Bridge under Heavy Truck Collision
Publication: Journal of Bridge Engineering
Volume 27, Issue 5
Abstract
Studying the failure or collapse mechanism of an entire bridge under vehicle–pier collision has engineering demand and practical meaning, while the existing damage assessment work mainly focuses on the impacted pier. This study aims to numerically clarify the collapse mechanism and evaluate the damage level of the entire bridge. First, the previously validated finite-element (FE) model of a simply supported RC bridge with double-pier bent when impacted head-on by a heavy truck. The model improved by incorporating the nonlinear behaviors and damage of the bridge superstructure. According to the truck mass and impact velocity involved in the actual collision accidents, 20 truck–pier collision scenarios are designed and numerically simulated by adopting the nonlinear FE program LS-DYNA. The damage/failure or collapse mechanism of the entire bridge, as well as the vehicular impact force and bridge structural dynamic behaviors, are examined. It shows that (i) the overall collapse of the bridge structure is an impact-successive and damage-accumulative process, which is not completely coincident with the failure of impacted pier; and (ii) the cargo-induced internal forces of the impacted pier have two peaks attributed to the initial contact and the following pushing–drag effect of cargo, respectively. Then, based on the damaged area of concrete and effective plastic strain of reinforcement, the damage levels of the main bridge components, including the pier, bent cap, tie beam, pile, girder, and deck, are qualitatively assessed and classified, followed by the clarifications of their corresponding inner correlations. Furthermore, by proposing two quantitative damage indexes, a feasible on-site approach for assessing the post-collision damage of the bridge structure is established and validated by eight additional collision scenarios, and the dependency of bridge damage level on both the vehicular impact velocity and mass is graphically presented. The proposed approach can be practically generalized to on-site damage evaluation of a bridge structure after actual accidents and can provide useful reference in design and restoration of RC bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully appreciate the support from the National Natural Science Foundations of China (51878507). Author contributions include Kai Heng: conceptualization, methodology, visualization, and writing the original draft; Ruiwen Li: review and editing; Hao Wu: modifying the original draft, funding acquisition, supervision, and verification.
References
Abdelkarim, O. I., and M. A. Elgawady. 2017. “Performance of bridge piers under vehicle collision.” Eng. Struct. 140: 337–352. https://doi.org/10.1016/j.engstruct.2017.02.054.
API (American Petroleum Institute). 2007. Recommended practice for planning, designing and constructing fixed offshore platforms — Working stress design. Washington, DC: API.
Auyeung, S., A. Alipourb, and D. Sainib. 2019. “Performance-based design of bridge piers under vehicle collision.” Eng. Struct. 191: 752–765. https://doi.org/10.1016/j.engstruct.2019.03.005.
Buth, C. E., W. F. Williams, M. S. Brackin, D. Lord, S. R. Geedipally, and A. Y. Abu-Odeh. 2010. Analysis of large truck collisions with bridge piers: Phase 1. Report of guidelines for designing bridge piers and abutments for vehicle collisions. Rep. No. FHWA/TX-10/9-4973-1. College Station, TX: Texas Transportation Institute.
Buth, C. E., M. S. Brackin, W. F. Williams, and G. T. Fry. 2011. Collision loads on bridge piers: Phase 2. Report of guidelines for designing bridge piers and abutments for vehicle collisions. Rep. No. FHWA/TX-11/9-4973-2. College Station, TX: Texas Transportation Institute.
Cai, J., J. B. Ye, Q. J. Chen, X. P. Liu, and Y. Q. Wang. 2018. “Dynamic behaviour of axially-loaded RC columns under horizontal impact loading.” Eng. Struct. 168: 684–697. https://doi.org/10.1016/j.engstruct.2018.04.095.
Cao, R., A. K. Agrawal, S. El-Tawil, X. Xu, and W. Wong. 2019. “Performance-based design framework for bridge piers subjected to truck collision.” J. Bridge Eng. 24 (7): 04019064. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001423.
Chen, X., A. K. Agrawal, S. El-Tawil, X. C. Xu, R. Cao, and W. Wong. 2019. “Inelastic behavior of a bridge bent subjected to truck impact: Experimental and computational study.” Eng. Struct. 199: 109543. https://doi.org/10.1016/j.engstruct.2019.109543.
Chen, L., H. Wu, and T. Liu. 2020. “Shear performance evaluation of reinforced concrete piers subjected to vehicle collision.” J. Struct. Eng. 146 (4): 04020026. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002571.
Chen, L. W., H. Wu, Q. Fang, and T. Zhang. 2018. “Numerical analysis of collision between a tractor-trailer and bridge pier.” Int. J. Protect. Struct. 9 (4): 484–503. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002571.
Demartino, C., J. G. Wu, and Y. Xiao. 2017. “Response of shear-deficient reinforced circular RC columns under lateral impact loading.” Int. J. Impact Eng. 109: 196–213. https://doi.org/http://dx.doi.org/10.1016/j.ijimpeng.2017.06.011.
Do, T. V., T. M. Pham, and H. Hao. 2018. “Dynamic responses and failure modes of bridge columns under vehicle collision.” Eng. Struct. 156 (1): 243–259. https://doi.org/10.1016/j.engstruct.2017.11.053.
Fan, W., X. Xu, Z. Y. Zhang, and X. D. Shao. 2018. “Performance and sensitivity analysis of UHPFRC-strengthened bridge columns subjected to vehicle collisions.” Eng. Struct. 173: 251–268. https://doi.org/10.1016/j.engstruct.2018.06.113.
Heng, K., R. W. Li, Z. R. Li, and H. Wu. 2021. “Dynamic responses of highway bridge subjected to heavy truck impact.” Eng. Struct. 232: 111828. https://doi.org/10.1016/j.engstruct.2020.111828.
Lee, G. C., S. B. Mohan, C. Huang, and B. N. Fard. 2013. A study of U.S. bridge failures (1980–2012). Rep. No. MCEER-13-0008. Buffalo, NY: Univ. at Buffalo.
Li, R. W., H. Wu, Q. T. Yang, and D. F. Wang. 2020a. “Vehicular impact resistance of seismic designed RC bridge piers.” Eng. Struct. 220: 111015. https://doi.org/10.1016/j.engstruct.2020.111015.
Li, R. W., D. Y. Zhou, and H. Wu. 2020b. “Experimental and numerical study on impact resistance of RC bridge piers under lateral impact loading.” Eng. Fail. Anal. 109: 104319. https://doi.org/10.1016/j.engfailanal.2019.104319.
Liu, F. 2017. “The mechanism research of reinforced concrete piers subjected to vehicle collisions.” [In Chinese.] Ph.D. thesis, College of Civil Engineering, Hunan Univ.
Loedolff, M. J. 1989. “The behaviour of reinforced concrete cantilever columns under lateral impact load.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Stellenbosch.
LSTC (Livermore Software Technology Corporation). 2013. LS-DYNA. Keyword user’s manual. Livermore, CA: LSTC.
Miele, C. R., C. A. Plaxico, J. C. Kennedy, S. Simunovic, and N. Zisi. 2005. Heavy vehicle-infrastructure asset interaction and collision. Knoxville, TN: National Transportation Research Center.
MOT (Ministry of Transport). 2018. Specifications for design of highway reinforced concrete and prestressed concrete bridges and culverts. [In Chinese.] JTG 3362-2018. Beijing: China Communications Press.
MOT (Ministry of Transport). 2015. General specifications for design of highway bridges and culverts. [In Chinese.] JTG D60-2015. Beijing: China Communications Press.
MOT (Ministry of Transport). 2020. Specifications for seismic design of highway bridges. [In Chinese.] JTG/T 2231-01-2020. Beijing: China Communications Press.
Symonds, P. S. 1967. Survey of methods of analysis for plastic deformation of structures under dynamic loading. Rep. No. BU/NSRDC/1-67. Providence, RI: Brown Univ. School of Engineering.
Xu, L. J., X. Z. Lu, H. Guan, and Y. S. Zhang. 2013. “Finite-element and simplified models for collision simulation between overheight trucks and bridge superstructures.” J. Bridge Eng. 18: 1140–1151. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000472.
Xu, L. J., X. Z. Lu, S. T. Smith, and S. T. He. 2012. “Scaled model test for collision between over-height truck and bridge superstructure.” Int. J. Impact Eng. 49: 31–42. https://doi.org/10.1016/j.ijimpeng.2012.05.003.
Yi, R. Y., and R. F. Zhou. 2015. “Reason and risk of bridge collapse in recent 15 years.” [In Chinese.] Transp. Sci. Technol. 5: 61–64.
Zeng, P. 2013. “Theoretical and experimental research on collision force of bridge pier.” [In Chinese.] Ph.D. thesis, School of Civil and Transportation Engineering, Guangdong Univ. of Technology.
Zhang, X., H. Hao, and C. Li. 2016. “Experimental investigation of the response of precast segmental columns subjected to impact loading.” Int. J. Impact Eng. 95: 105–124. https://doi.org/http://dx.doi.org/10.1016/j.ijimpeng.2016.05.005.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jun 21, 2021
Accepted: Dec 22, 2021
Published online: Feb 24, 2022
Published in print: May 1, 2022
Discussion open until: Jul 24, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Kai Heng, Tianli Chen, Ruiwen Li, Hao Wu, Dynamic behaviors and equivalent static force of double-column pier under horizontal impact, Structures, 10.1016/j.istruc.2023.02.016, 49, (1093-1111), (2023).
- Chang Zhou, Yazhou Xie, Wenwei Wang, Yuzhou Zheng, Performance-based design for improving impact resistance of RC bridge piers with CFRP grid-reinforced ECC, Engineering Structures, 10.1016/j.engstruct.2022.115217, 275, (115217), (2023).
- Yi Zhang, Ruiwen Li, Kai Heng, Feng Hu, Dynamic Behaviors of Optimized K12 Anti-Ram Bollards, Symmetry, 10.3390/sym14081703, 14, 8, (1703), (2022).
- Ruiwen Li, Nan Zhang, Hao Wu, Pengcheng Jia, Vehicular Impact Resistance of FRP-Strengthened RC Bridge Pier, Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943-5592.0001901, 27, 8, (2022).
- Wuchao Zhao, Huida Feng, Jihong Ye, Jiang Qian, Performance of precast concrete bridge piers with grouted sleeve connections against vehicle impact, Structures, 10.1016/j.istruc.2022.09.004, 44, (1874-1885), (2022).
- Xiuchen Xu, Hongchao Zhang, Xiaobo Du, Qiang Liu, Vehicle collision with RC structures: A state-of-the-art review, Structures, 10.1016/j.istruc.2022.08.107, 44, (1617-1635), (2022).
- R.W. Li, N. Zhang, H. Wu, Effectiveness of CFRP shear-strengthening on vehicular impact resistance of double-column RC bridge pier, Engineering Structures, 10.1016/j.engstruct.2022.114604, 266, (114604), (2022).