Safety Assessment of Widened Bridges Considering Uneven Multilane Traffic-Load Modeling: Case Study in China
Publication: Journal of Bridge Engineering
Volume 25, Issue 9
Abstract
Several bridges now require widening owing to the continuous development of road transport. However, the standard of traffic load in design specifications has been enhanced. Consequently, old bridges may not meet the safety requirements of current design specifications and, therefore, must be reconstructed or retrofitted. However, the old structures in widened bridges carry fast-lane traffic loads, which are relatively low due to uneven multilane traffic loads. This paper reports a case study conducted on a Chinese highway widening project for comprehensively evaluating the structural safety of multislab widened bridges using code-based deterministic and reliability-based probabilistic approaches. In the deterministic evaluation, previous and current Chinese bridge designs and other national codes were employed. Meanwhile, in the probabilistic assessment, an uneven multilane truckload modeling was implemented based on site-specific traffic data. Subsequently, bridge safety under normal traffic conditions with all lanes open and occasional traffic conditions with lane closure was investigated. The results indicate that most old slabs, especially those closer to medial dividers, are unsafe under the current Chinese design specifications. However, a site-specific assessment under normal traffic conditions indicates that these old slabs possess adequate security reserves, except that the side slab close to the junction requires safety. Further analyses conducted with occasional traffic conditions demonstrated that closing fast lanes does not affect the safety of slabs. Conversely, closing slow lanes significantly affects the safety of inner old slabs, which should be prohibited or addressed with strict weight restrictions. These results can be beneficial for future bridge widening projects.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (CN) (Grant No. 51808148); the Natural Science Foundation of Guangdong Province, China (CN) (Grant No. 2019A1515010701); and the Guangzhou Municipal Science and Technology Project (CN) (Grant No. 201904010188).
References
AASHTO. 2010. AASHTO LRFD bridge design specifications. 5th ed. Washington, DC: AASHTO.
BSI (British Standards Institution). 2006. Specification for loads. BS 5400-2. London: BSI.
Caprani, C. C. 2013. “Lifetime highway bridge traffic load effect from a combination of traffic states allowing for dynamic amplification.” J. Bridge Eng. 18 (9): 901–909. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000427.
CEN (European Committee for Standardization) 2003. Traffic loads on bridges. Eurocode 1 Part 2. Washington, DC: CEN.
Chen, W. F., and L. Duan. 2014. Bridge engineering handbook: Construction and maintenance. Abingdon, UK: Taylor & Francis.
Davis, N. T., E. Hoomaan, A. K. Agrawal, M. Sanayei, and F. F. Jalinoos. 2019. “Foundation reuse in accelerated bridge construction.” J. Bridge Eng. 24 (10): 05019010. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001455.
Enright, B., C. Carey, and C. C. Caprani. 2013. “Microsimulation evaluation of Eurocode load model for American long-span bridges.” J. Bridge Eng. 18 (12): 1252–1260. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000546.
Han, W., Y. Yuan, Q. Xie, X. Chen, and P. Huang. 2018. “Reliability-based truck weight regulation of small- to medium-span bridges.” J. Bridge Eng. 23 (1): 04017109. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001149.
Jandu, A. S. 2008. “Inspection and maintenance of highway structures in England.” Proc. Inst. Civ. Eng. 161: 111–114. https://doi.org/10.1680/bren.2008.161.3.111.
MOT (Ministry of Transport of China). 1989. General specifications for design of highway bridges and culverts. JTG D60. Beijing: China Communication Press.
MOT (Ministry of Transport of China). 2004. General specifications for design of highway bridges and culverts. JTG D60. Beijing: China Communication Press.
MOT (Ministry of Transport of China). 2009. Technical specification for highway maintenance. JTG H10. Beijing: China Communications Press.
MOT (Ministry of Transport of China). 2014. Guidelines for design of expressway reconstruction and extension. JTG/T L11-2014. Beijing: China Communications Press.
MOT (Ministry of Transport of China). 2015. General specifications for design of highway bridges and culverts. JTG D60. Beijing: China Communication Press.
MOT (Ministry of Transport of China). 2018. Code for highway reinforced concrete and prestressed concrete bridges and culverts. JTG D62. Beijing: China Communication Press.
O’Brien, E. J., D. Cantero, B. Enright, and A. González. 2010. “Characteristic dynamic increment for extreme traffic loading events on short and medium span highway bridges.” Eng. Struct. 32 (12): 3827–3835. https://doi.org/10.1016/j.engstruct.2010.08.018.
PRC National Standard. 1999. Unified standard for the reliability design of highway engineering structures. [In Chinese.] GB/T 50283-1999. Beijing: China Plan Press.
Ruan, X., J. Y. Zhou, X. F. Shi, and C. C. Caprani. 2017a. “A site-specific traffic load model for long-span multi-pylon cable-stayed bridges.” Struct. Infrastruct. Eng. 13 (4): 494–504. https://doi.org/10.1080/15732479.2016.1164724.
Ruan, X., J. Y. Zhou, H. Z. Tu, Z. R. Jin, and X. F. Shi. 2017b. “An improved cellular automaton with axis information for microscopic traffic simulation.” Transp. Res. C 78: 63–77. https://doi.org/10.1016/j.trc.2017.02.023.
Sivakumar, B., M. Ghosn, and F. Moses. 2010. “Adjustment of load and resistance factor design live load factors using recent weigh-in-motion data.” Transp. Res. Rec. 2200 (1): 90–97. https://doi.org/10.3141/2200-11.
Tu, B., Z. Fang, Y. Dong, and D. M. Frangopol. 2017. “Time-variant reliability analysis of widened deteriorating prestressed concrete bridges considering shrinkage and creep.” Eng. Struct. 153: 1–16. https://doi.org/10.1016/j.engstruct.2017.09.060.
Wen, Q.-J., and H.-W. Jing. 2014. “Numerical simulation of creep and shrinkage in widened concrete bridges.” Mag. Concrete Res. 66 (13): 661–673. https://doi.org/10.1680/macr.13.00212.
Xu, Q. X. 2017. “A potential new structural design for flexible pavement.” Master thesis, TU Delft Civil Engineering and Geosciences, Delft Univ. of Technology.
Zhou, J. Y., Z. X. Chen, J. Yi, and H. Y. Ma. 2020. “Investigation of multi-lane factor models for bridge traffic load effects using multiple lane traffic data.” Structures 24: 444–455. https://doi.org/10.1016/j.istruc.2020.01.031.
Zhou, J. Y., X. Ruan, X. F. Shi, and C. C. Caprani. 2019a. “An efficient approach for traffic load modelling of long span bridges.” Struct. Infrastruct. Eng. 15 (5): 569–581. https://doi.org/10.1080/15732479.2018.1555264.
Zhou, J. Y., X. F. Shi, C. C. Caprani, and X. Ruan. 2018. “Multi-lane factor for bridge traffic load from extreme events of coincident lane load effects.” Struct. Saf. 72: 17–29. https://doi.org/10.1016/j.strusafe.2017.12.002.
Zhou, J. Y., X. F. Shi, L. W. Zhang, and Z. Sun. 2019b. “Traffic control technologies without interruption for component replacement of long-span bridges using microsimulation and site-specific data.” Struct. Eng. Mech. 70 (2): 169–178. https://doi.org/10.12989/sem.2019.70.2.169.
Zhou, X.-Y., M. Treacy, F. Schmidt, E. Brühwiler, F. Toutlemonde, and B. Jacob. 2015. “Effect on bridge load effects of vehicle transverse in-lane position: A case study.” J. Bridge Eng. 20 (12): 04015020. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000763.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 1, 2020
Accepted: May 12, 2020
Published online: Jul 14, 2020
Published in print: Sep 1, 2020
Discussion open until: Dec 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.