Investigation of Temperature Effects on Steel-Truss Bridge Based on Long-Term Monitoring Data: Case Study
Publication: Journal of Bridge Engineering
Volume 25, Issue 9
Abstract
The time-varying average and differential temperatures may significantly change the performance of steel truss bridges, which may increase the difficulties for bridge design, construction, and maintenance. Because hundreds of steel members usually have different geometric dimensions, the temperature effect on the steel truss bridge is extremely complicated, and no general formula is available for predicting temperature-induced responses. In this study, the 2-year field monitoring data collected from a 108-m-long steel truss bridge are utilized to investigate the temperature effects on strain responses. In particular, the relationships between temperature-induced stress and standard temperature actions are investigated using correlation analysis and numerical simulation. Accordingly, the simple general formula is provided to capture the relationships between temperature distributions and temperature-induced strains. The accuracy of the proposed formula is verified using the field monitoring data of the box-shaped members and the H-shaped members. The notable vertical temperature gradients are usually observed in box-shaped members, which can generate larger thermal strain responses than H-shaped members. The results of this study could provide a simple and relatively general solution to predict the temperature-induced strain of steel truss bridges. Meanwhile, this conclusion drawn may provide references for the design and maintenance of steel truss bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to gratefully acknowledge the supports from the National Basic Research Program of China (973 Program) (Grant No. 2015CB060000), the National Natural Science Foundation of China (Grant No. 51722804), the National Natural Science Foundation of China (Grant No. 51978155), the National Ten Thousand Talent Program for Young Top-notch Talents (Grant No. W03070080), the Jiangsu Transportation Scientific Research Project (Grant No. 8505001498), the Jiangsu Key R & D Plan (Grant No. BE2018120), the Postgraduate Research & Practice Innovation Program of Jiangsu Province (Grant No. KYCX19_0095), and the China Scholarship Council (Grant No. 201906090075). The authors also thank the help from Highway Administration of Jiangsu Communications Department and Changzhou Highway Administration Department for providing long-term monitoring data of the Benniu Bridge.
References
Barr, P. J., J. F. Stanton, and M. O. Eberhard. 2005. “Effects of temperature variations on precast, prestressed concrete bridge girders.” J. Bridge Eng. 10 (2): 186–194. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:2(186).
Cao, Y., J. Yim, Y. Zhao, and M. L. Wang. 2011. “Temperature effects on cable stayed bridge using health monitoring system: A case study.” Struct. Health Monit. 10 (5): 523–537. https://doi.org/10.1177/1475921710388970.
Catbas, F. N., M. Susoy, and D. M. Frangopol. 2008. “Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring data.” Eng. Struct. 30 (9): 2347–2359. https://doi.org/10.1016/j.engstruct.2008.01.013.
de Battista, N., J. M. W. Brownjohn, H. P. Tan, and K. Y. Koo. 2015. “Measuring and modelling the thermal performance of the Tamar suspension bridge using a wireless sensor network.” Struct. Infrastruct. Eng. 11 (2): 176–193. https://doi.org/10.1080/15732479.2013.862727.
Deng, Y., A. Q. Li, Y. Liu, and S. R. Chen. 2018. “Investigation of temperature actions on flat steel box girders of long-span bridges with temperature monitoring data.” Adv. Struct. Eng. 21 (14): 2099–2113. https://doi.org/10.1177/1369433218766946.
Ding, Y. L., G. D. Zhou, A. Q. Li, and G. X. Wang. 2012. “Thermal field characteristic analysis of steel box girder based on long-term measurement data.” Int. J. Steel Struct. 12 (2): 219–232. https://doi.org/10.1007/s13296-012-2006-x.
Gong, J. 2000. “A new probability index for estimating Weibull modulus for ceramics with the least-square method.” J. Mater. Sci. Lett. 19 (10): 827–829. https://doi.org/10.1023/A:1006712809728.
Hua, X. G., Y. Q. Ni, J. M. Ko, and K. Y. Wong. 2007. “Modeling of temperature-frequency correlation using combined principal component analysis and support vector regression technique.” J. Comput. Civil Eng. 21 (2): 122–135. https://doi.org/10.1061/(ASCE)0887-3801(2007)21:2(122).
Ko, J. M., and Y. Q. Ni. 2005. “Technology developments in structural health monitoring of large-scale bridges.” Eng. Struct. 27 (12): 1715–1725. https://doi.org/10.1016/j.engstruct.2005.02.021.
Kromanis, R., and P. Kripakaran. 2014. “Predicting thermal response of bridges using regression models derived from measurement histories.” Comput. Struct. 136: 64–77. https://doi.org/10.1016/j.compstruc.2014.01.026.
Kromanis, R., and P. Kripakaran. 2017. “Data-driven approaches for measurement interpretation: Analysing integrated thermal and vehicular response in bridge structural health monitoring.” Adv. Eng. Inf. 34: 46–59. https://doi.org/10.1016/j.aei.2017.09.002.
LaFave, J. M., J. K. Riddle, M. W. Jarrett, B. A. Wright, J. S. Svatora, H. Y. An, and L. A. Fahnestock. 2016. “Numerical simulations of steel integral abutment bridges under thermal loading.” J. Bridge Eng. 21 (10): 04016061. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000919.
Li, H., J. P. Ou, X. F. Zhao, W. S. Zhou, H. W. Li, Z. Zhou, and Y. S. Yang. 2006. “Structural health monitoring system for the Shandong Binzhou Yellow River highway bridge.” Comput.-Aided Civ. Infrastruct. Eng. 21 (4): 306–317. https://doi.org/10.1111/j.1467-8667.2006.00437.x.
Liu, H. B., Z. H. Chen, and T. Zhou. 2012. “Theoretical and experimental study on the temperature distribution of H-shaped steel members under solar radiation.” Appl. Therm. Eng. 37: 329–335. https://doi.org/10.1016/j.applthermaleng.2011.11.045.
Mao, J. X., H. Wang, D. M. Feng, T. Y. Tao, and W. Z. Zheng. 2018. “Investigation of dynamic properties of long-span cable-stayed bridges based on one-year monitoring data under normal operating condition.” Struct. Control Health Monit. 25 (5): e2146. https://doi.org/10.1002/stc.2146.
Mao, J. X., H. Wang, and J. Li. 2019. “Fatigue reliability assessment of a long-span cable-stayed bridge based on one-year monitoring strain data.” J. Bridge Eng. 24 (1): 05018015. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001337.
Neild, S. A., M. S. Williams, and P. D. McFadden. 2005. “Development of a vibrating wire strain gauge for measuring small strains in concrete beams.” Strain 41 (1): 3–9. https://doi.org/10.1111/j.1475-1305.2004.00163.x.
Ni, Y. Q., X. G. Hua, K. Q. Fan, and J. M. Ko. 2005. “Correlating modal properties with temperature using long-term monitoring data and support vector machine technique.” Eng. Struct. 27 (12): 1762–1773. https://doi.org/10.1016/j.engstruct.2005.02.020.
Ni, Y. Q., H. W. Xia, K. Y. Wong, and J. M. Ko. 2012. “In-service condition assessment of bridge deck using long-term monitoring data of strain response.” J. Bridge Eng. 17 (6): 876–885. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000321.
Roeder, C. W. 2003. “Proposed design method for thermal bridge movements.” J. Bridge Eng. 8 (1): 12–19. https://doi.org/10.1061/(ASCE)1084-0702(2003)8:1(12).
Song, X. M., H. Melhem, J. Li, Q. Y. Xu, and L. J. Cheng. 2016. “Effects of solar temperature gradient on long-span concrete box girder during cantilever construction.” J. Bridge Eng. 21 (3): 04015061. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000844.
Tong, M., L. G. Tham, and F. T. Au. 2002. “Extreme thermal loading on steel bridges in tropical region.” J. Bridge Eng. 7 (6): 357–366. https://doi.org/10.1061/(ASCE)1084-0702(2002)7:6(357).
Wan, H. P., and Y. Q. Ni. 2018. “Bayesian modeling approach for forecast of structural stress response using structural health monitoring data.” J. Struct. Eng. 144 (9): 04018130. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002085.
Wan, H. P., and Y. Q. Ni. 2019. “Bayesian multi-task learning methodology for reconstruction of structural health monitoring data.” Struct. Health Monit. 18 (4): 1282–1309. https://doi.org/10.1177/1475921718794953.
Wang, H., T. Y. Tao, A. Q. Li, and Y. F. Zhang. 2016. “Structural health monitoring system for Sutong cable-stayed bridge.” Smart Struct. Syst. 18 (2): 317–334. https://doi.org/10.12989/sss.2016.18.2.317.
Wang, H., Y. M. Zhang, J. X. Mao, H. P. Wan, T. Y. Tao, and Q. X. Zhu. 2019a. “Modeling and forecasting of temperature-induced strain of a long-span bridge using an improved Bayesian dynamic linear model.” Eng. Struct. 192: 220–232. https://doi.org/10.1016/j.engstruct.2019.05.006.
Wang, H., Q. X. Zhu, J. Li, J. X. Mao, S. T. Hu, and X. X. Zhao. 2019b. “Identification of moving train loads on railway bridge based on strain monitoring.” Smart Struct. Syst. 23 (3): 263–278. https://doi.org/10.12989/sss.2019.23.3.263.
Wei, S. Y., Z. H. Zhang, S. L. Li, and H. Li. 2017. “Strain features and condition assessment of orthotropic steel deck cable-supported bridges subjected to vehicle loads by using dense FBG strain sensors.” Smart Mater. Struct. 26 (10): 104007. https://doi.org/10.1088/1361-665X/aa7600.
Westgate, R., K. Y. Koo, and J. Brownjohn. 2015. “Effect of solar radiation on suspension bridge performance.” J. Bridge Eng. 20 (5): 04014077. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000668.
Xia, Q., J. Zhang, Y. D. Tian, and Y. F. Zhang. 2017. “Experimental study of thermal effects on a long-span suspension bridge.” J. Bridge Eng. 22 (7): 04017034. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001083.
Xia, Y., B. Chen, X. Q. Zhou, and Y. L. Xu. 2013. “Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behavior.” Struct. Control Health Monit. 20 (4): 560–575. https://doi.org/10.1002/stc.515.
Xu, X., Q. Huang, Y. Ren, D. Y. Zhao, J. Yang, and D. Y. Zhang. 2019. “Modeling and separation of thermal effects from cable-stayed bridge response.” J. Bridge Eng. 24 (5): 04019028. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001387.
Xu, Y. L., B. Chen, C. L. Ng, K. Y. Wong, and W. Y. Chan. 2010. “Monitoring temperature effect on a long suspension bridge.” Struct. Control Health Monit. 17 (6): 632–653. https://doi.org/10.1002/stc.340.
Yarnold, M. T., and F. L. Moon. 2015. “Temperature-based structural health monitoring baseline for long-span bridges.” Eng. Struct. 86: 157–167. https://doi.org/10.1016/j.engstruct.2014.12.042.
Zhou, L. R., Y. Xia, J. M. Brownjohn, and K. Y. Koo. 2016. “Temperature analysis of a long-span suspension bridge based on field monitoring and numerical simulation.” J. Bridge Eng. 21 (1): 04015027. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000786.
Zhou, Y., and L. M. Sun. 2018. “Insights into temperature effects on structural deformation of a cable-stayed bridge based on structural health monitoring.” Struct. Health Monit. 18 (3): 147592171877395. https://doi.org/10.1177/1475921718773954.
Zhu, Q. X., H. Wang, J. X. Mao, J. Y. Min, J. R. Liu, and W. J. Wang. 2019. “Prediction of the strain response of bridge under ambient temperature excitation based on ANFIS.” China J. Highway Transp. 32 (11): 62–70.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jul 10, 2019
Accepted: Apr 3, 2020
Published online: Jun 18, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 18, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.