Development of Traffic Live-Load Models for Bridge Superstructure Rating with RBDO and Best Selection Approach
Publication: Journal of Bridge Engineering
Volume 24, Issue 8
Abstract
Reliability-based design optimization (RBDO) is frequently used to determine optimal structural geometry and material characteristics that can best meet performance goals while considering uncertainties. In this study, the effectiveness of RBDO to develop a load rating model for a set of bridge structures was explored, as well as the use of an alternate best selection procedure that requires substantially less computational effort. The specific problem investigated was the development of a vehicular load model for use in bridge rating, where the objective of the optimization is to minimize the variation in reliability index across different girder types and bridge geometries. Moment and shear limit states were considered, where girder resistance and load random variables were included in the reliability analysis. It was found that the proposed best selection approach could be used to develop a rating model nearly as effective as an ideal RBDO solution but with significantly less computational effort. Both approaches significantly reduced the range and coefficient of variation of the reliability index among the bridge cases considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 1994. Manual for condition evaluation of bridges (including 1998 interim revision). Washington, DC: AASHTO.
AASHTO. 2003. Manual for condition evaluation and load and resistance factor rating (LRFR) of highway bridges. Washington, DC: AASHTO.
AASHTO. 2017. LRFD bridge design specifications. 8th ed. Washington, DC: AASHTO.
AASHTO. 2018. Manual for bridge evaluation. 3rd ed. Washington, DC: AASHTO.
Agarwal, H., C. Mozumder, J. Renaud, and L. Watson. 2007. “An inverse-measure-based unilevel architecture for reliability-based design optimization.” Struct. Multidiscip. Optim. 33 (3): 217–227. https://doi.org/10.1007/s00158-006-0057-3.
Anitori, G., J. R. Casas, and M. Ghosn. 2017. “WIM-based live-load model for advanced analysis of simply supported short- and medium-span highway bridges.” J. Bridge Eng. 22 (10): 04017062. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001081.
Aoues, Y., and A. Chateauneuf. 2010. “Benchmark study of numerical methods for reliability-based design optimization.” Struct. Multidiscip. Optim. 41 (2): 277–294. https://doi.org/10.1007/s00158-009-0412-2.
Basha, B., and B. Sivakumar. 2010. “Optimum design of bridge abutments under seismic conditions: Reliability-based approach.” J. Bridge Eng. 15 (2): 183–195. https://doi.org/10.1061/(ASCE)1084-0702(2010)15:2(183).
Behnam, B., and C. Eamon. 2013. “Reliability-based design optimization of concrete flexural members reinforced with ductile FRP bars.” Constr. Build. Mater. 47 (Oct): 942–950. https://doi.org/10.1016/j.conbuildmat.2013.05.101.
Chen, X., T. K. Hasselman, and D. J. Neill. 1997. “Reliability based structural design optimization for practical applications.” In Proc., 38th Structures, Structural Dynamics, and Materials Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Choi, K., J. Tu, and Y. Park. 2001. “Extensions of design potential concept for reliability-based design optimization to nonsmooth and extreme cases.” Struct. Multidiscip. Optim. 22 (5): 335–350. https://doi.org/10.1007/s00158-001-0154-2.
Curtis, R., and R. Till. 2008. Recommendations for Michigan specific load and resistance factor design loads and load and resistance factor rating procedures. MDOT Research Rep. R-1511. Lansing, MI: Michigan Dept. of Transportation.
Du, X., and W. Chen. 2004. “Sequential optimization and reliability assessment method for efficient probabilistic design.” J. Mech. Des. 126 (2): 225–233. https://doi.org/10.1115/1.1649968.
Eamon, C., V. Kamjoo, and K. Shinki. 2014. Side by side probability for bridge design and analysis. MDOT Report RC-1601. Lansing, MI: Michigan Dept. of Transportation.
Eamon, C., V. Kamjoo, and K. Shinki. 2016. “Design live-load factor calibration for Michigan highway bridges.” J. Bridge Eng. 21 (6): 04016014. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000897.
Eamon, C. D., and S. Siavashi. 2018. Developing representative Michigan truck configurations for bridge load rating. Rep. No. SPR-1640. Lansing, MI: Michigan Dept. of Transportation.
Enevoldsen, I., and J. Sørensen. 1994. “Reliability-based optimization in structural engineering.” Struct. Saf. 15 (3): 169–196. https://doi.org/10.1016/0167-4730(94)90039-6.
Fan, S. K. S., Y. J. Chang, and N. Aidara. 2013. “Nonlinear profile monitoring of reflow process data based on the sum of sine functions.” Qual. Reliab. Eng. Int. 29 (5): 743–758. https://doi.org/10.1002/qre.1425.
FHWA (Federal Highway Administration). 2015. Bridge formula weights. FHWA-HOP-06-105. Washington, DC: US Dept. of Transportation, Office of Freight Management and Operations.
Frangopol, D. M. 1995. “Reliability-based optimum structural design.” Chap. 16 in Probabilistic structural mechanics handbook, edited by C. Sundararajan, 352–387. New York: Chapman & Hall.
García-Segura, T., V. Yepes, D. Frangopol, and D. Yang. 2017. “Lifetime reliability-based optimization of post-tensioned box-girder bridges.” Eng. Struct. 145 (Aug): 381–391. https://doi.org/10.1016/j.engstruct.2017.05.013.
Ghosn, M., B. Sivakumar, and F. Miao. 2011. Load and resistance factor rating (LRFR) in NYS. Final Rep. NYSDOT Rep. C-06-13. Albany, NY: New York State Dept. of Transportation.
Grandhi, R. V., and L. Wang. 1998. “Reliability-based structural optimization using improved two-point adaptive nonlinear approximation.” Finite Elem. Anal. Des. 29 (1): 35–48. https://doi.org/10.1016/S0168-874X(98)00007-9.
Hao, H., and Y. Xia. 2002. “Vibration-based damage detection of structures by genetic algorithm.” J. Comput. Civ. Eng. 16 (3): 222–229. https://doi.org/10.1061/(ASCE)0887-3801(2002)16:3(222).
Kamjoo, V., and C. Eamon. 2018. “Reliability-based design optimization of a vehicular live load model.” Eng. Struct. 168 (Aug): 799–808. https://doi.org/10.1016/j.engstruct.2018.05.033.
Karaboga, D., and B. Basturk. 2007. “A powerful and efficient algorithm for numerical function optimization: Artificial bee colony (ABC) algorithm.” J. Global Optim. 39 (3): 459–471. https://doi.org/10.1007/s10898-007-9149-x.
Kennedy, J. 2011. Particle swarm optimization. Encyclopedia of machine learning. Boston: Springer.
Kharmanda, G., A. Mohamed, and M. Lemaire. 2002. “Efficient reliability-based design optimization using a hybrid space with application to finite element analysis.” Struct. Multidiscip. Optim. 24 (3): 233–245. https://doi.org/10.1007/s00158-002-0233-z.
Kharmanda, G., and N. Olhoff. 2007. “Extension of optimum safety factor method to nonlinear reliability-based design optimization.” Struct. Multidiscip. Optim. 34 (5): 367–380. https://doi.org/10.1007/s00158-007-0107-5.
Kirjner-Neto, C., E. Polak, and A. Der Kiureghian. 1998. “An outer approximations approach to reliability-based optimal design of structures.” J. Optim. Theory Appl. 98 (1): 1–16. https://doi.org/10.1023/A:1022647728419.
Kirkpatrick, S. 1984. “Optimization by simulated annealing: Quantitative studies.” J. Stat. Phys. 34 (5–6): 975–986. https://doi.org/10.1007/BF01009452.
Koch, P. N., and Kodiyalam S. 1999. “Variable complexity structural reliability analysis for efficient reliability-based design optimization.” In Proc., 40th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf. 68–77. St. Louis, MS: AIAA-99-1210.
Konak, A., D. W. Coit, and A. E. Smith. 2006. “Multi-objective optimization using genetic algorithms: A tutorial.” Reliab. Eng. Syst. Saf. 91 (9): 992–1007. https://doi.org/10.1016/j.ress.2005.11.018.
Koumousis, V. K., and P. G. Georgiou. 1994. “Genetic algorithms in discrete optimization of steel truss roofs.” J. Comput. Civ. Eng. 8 (3): 309–325. https://doi.org/10.1061/(ASCE)0887-3801(1994)8:3(309).
Kusano, I., A. Baldomir, J. A. Jurado, and S. Hernández. 2014. “Reliability based design optimization of long-span bridges considering flutter.” J. Wind Eng. Ind. Aerodyn. 135 (Dec): 149–162. https://doi.org/10.1016/j.jweia.2014.10.006.
Kwon, O. S., S. Orton, H. Salim, E. Kim, and T. Hazlett. 2010. Calibration of the live load factor in LRFD design guidelines. MODOT Rep. ORI1-003. Jefferson City, MO: Missouri Dept. of Transportation.
Lee, C. E., and N. Souny-Slitine. 1998. Final research findings on traffic-load forecasting using weigh-in-motion data. Rep. 987-7. Austin, TX: Center for Transportation Research Bureau of Engineering Research, Univ. of Texas at Austin.
Man, K. F., K. S. Tang, and S. Kwong. 1996. “Genetic algorithms: Concepts and applications [in engineering design].” IEEE Trans. Ind. Electron. 43 (5): 519–534. https://doi.org/10.1109/41.538609.
MDOT (Michigan Dept. of Transportation). 2005. Bridge analysis guide with 2009 interim update, parts 1 and 2. Lansing, MI: Michigan Dept. of Transportation Construction and Technology Support Area.
Mohsine, A., G. Kharmanda, and A. El-Hami. 2006. “Improved hybrid method as a robust tool for reliability-based design optimization.” Struct. Multidiscip. Optim. 32 (3): 203–213. https://doi.org/10.1007/s00158-006-0013-2.
Nakib, R. 1997. “Deterministic and reliability-based optimization of truss bridges.” Comput. Struct. 65 (5): 767–775. https://doi.org/10.1016/S0045-7949(94)E0289-E.
Negrão, J. H., and L. M. Simões. 2004. “Reliability-based optimum design of cable-stayed bridges.” Struct. Multidiscip. Optim. 28 (2–3): 214–220.
Nowak, A. S. 1999. Calibration of LRFD bridge design code. NCHRP Rep. 368. Washington, DC: Transportation Research Board.
Pelphrey, J., and C. Higgins. 2006. Calibration of LRFR live load factors using weigh-in-motion data. ODOT Report SPR 635. Oregon: Oregon Dept. of Transportation.
Qu, X., and R. T. Haftka. 2004. “Reliability-based design optimization using probabilistic sufficiency factor.” Struct. Multidiscip. Optim. 27 (5): 314–325.
Rackwitz, R., and B. Flessler. 1978. “Structural reliability under combined random load sequences.” Comput. Struct. 9 (5): 489–494. https://doi.org/10.1016/0045-7949(78)90046-9.
Rais-Rohani, M., K. Solanki, E. Acar, and C. Eamon. 2010. “Shape and sizing optimisation of automotive structures with deterministic and probabilistic design constraints.” Int. J. Veh. Des. 54 (4): 309–338. https://doi.org/10.1504/IJVD.2010.036839.
Rais-Rohani, M., and Q. Xie. 2005. “Probabilistic structural optimization under reliability, manufacturability, and cost constraints.” AIAA J. 43 (4): 864–873. https://doi.org/10.2514/1.2048.
Saad, L., A. Aissani, A. Chateauneuf, and W. Raphael. 2016. “Reliability-based optimization of direct and indirect LCC of RC bridge elements under coupled fatigue-corrosion deterioration processes.” Eng. Fail. Anal. 59 (Jan): 570–587. https://doi.org/10.1016/j.engfailanal.2015.11.006.
Siavashi, S., C. D. Eamon, A. A. Makkawy, and H. C. Wu. 2019. “Long-term durability of FRP bond in the midwest United States for externally strengthened bridge components.” J. Compos. Constr. 23 (2): 05019001. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000928.
Sivakumar, B., M. Ghosn, and F. Moses. 2011. Protocols for collecting and using traffic data in bridge design. NCHRP Rep. 683, Washington, DC: Transportation Research Board.
Soler, J., M. Gómez, and J. Rodellar. 2013. “GoRoSo: Feedforward control algorithm for irrigation canals based on sequential quadratic programming.” J. Irrig. Drain. Eng. 139 (1): 41–54. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000507.
Tabatabai, H., J. Zhao, and C. W. Lee. 2000. Statistical analysis of heavy truck loads using Wisconsin weigh-in-motion data. WDOT Project CFIRE 01-02. WI: Wisconsin Dept. of Transportation.
Tang, K. S., K. F. Man, and S. Kwong. 1996. “Genetic algorithms and their applications.” IEEE Signal Process. Mag. 13 (6): 22–37. https://doi.org/10.1109/79.543973.
Thoft-Christensen, P. 2000. “On reliability based optimal design of concrete bridges.” In Proc., Advanced Technology in Structural Engineering, 1–8. Philadelphia: ASCE.
Thompson, M., C. D. Eamon, and M. Rais-Rohani. 2006. “Reliability-based optimization of fiber-reinforced polymer composite bridge deck panels.” J. Struct. Eng. 132 (12): 1898–1906. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1898).
Tu, J., K. K. Choi, and Y. H. Park. 1999. “A new study on reliability-based design optimization.” J. Mech. Des. 121 (4): 557–564. https://doi.org/10.1115/1.2829499.
Turan, K. H., and A. M. Yanmaz. 2011. “Reliability-based optimization of river bridges using artificial intelligence techniques.” Can. J. Civ. Eng. 38 (10): 1103–1111. https://doi.org/10.1139/l11-069.
Vanderplaats, G. N. 1999. Numerical optimization techniques for engineering design. Colorado Springs, CO: Vanderplaats Research & Development, Inc.
Yang, G., A. F. Zhang, and X. K. Li. 2011. “Optimization design method of steel truss girder bridge reliability.” Adv. Mater. Res. 243: 1826–1829. https://doi.org/10.4028/www.scientific.net/AMR.243-249.1826.
Yang, R. J., and L. Gu. 2004. “Experience with approximate reliability-based optimization methods.” Struct. Multidiscip. Optim. 26 (1–2): 152–159. https://doi.org/10.1007/s00158-003-0319-2.
Youn, B. D., and K. K. Choi. 2004. “Selecting probabilistic approaches for reliability-based design optimization.” AIAA J. 42 (1): 124–131. https://doi.org/10.2514/1.9036.
Zou, T., and S. Mahadevan. 2006. “A direct decoupling approach for efficient reliability-based design.” Struct. Multidiscip. Optim. 31 (3): 190. https://doi.org/10.1007/s00158-005-0572-7.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Jan 14, 2019
Accepted: Mar 26, 2019
Published online: May 21, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 21, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.