Shaking Table Tests of Post-Tensioned Rocking Bridge with Double-Column Bents
Publication: Journal of Bridge Engineering
Volume 24, Issue 8
Abstract
Rocking piers can limit the seismic damage and residual displacement under strong earthquakes to maintain the post-earthquake serviceability of bridges. This article presents an experimental study on the seismic response and rocking isolation of a bridge with post-tensioned rocking piers exhibiting negative rocking stiffness. A 1/10 scaled single-span bridge was precast and tested on a shaking table. The experimental results show that appropriately designed unbonded tendons can enhance the seismic stability of rocking bridges without serious loss of isolation efficiency. The bridge model presented excellent post-earthquake resilience with negligible residual displacement and damage due to enhanced rocking interfaces. In addition, a larger section depth of the columns rendered ample stability but weaker isolation efficiency.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was jointly funded by the National Natural Science Foundation of China (Grants 51421005, 51838010, and 51678013), Beijing Municipal Education Commission (IDHT20190504) and the Beijing Natural Science Foundation (Grant 8162007). This financial support is gratefully acknowledged. The results and conclusions presented in the article are those of the authors and do not necessarily reflect the view of the sponsors.
References
Cheng, C. T. 2008. “Shaking table tests of self-centering designed bridge sub-structures.” Eng. Struct. 30 (12): 3426–3433. https://doi.org/10.1016/j.engstruct.2008.05.017.
Cormack, L. G., 1987. “The design and construction of major bridges on the Mangaweka rail deviation.” In Proc., Institution of Professional Engineers of New Zealand Annual Conf., 1–14. Wellington, New Zealand: Institution of Professional Engineers New Zealand.
Dimitrakopoulos, E. G., and T. S. Paraskeva. 2015. “Dimensionless fragility curves for rocking response to near-fault excitations.” Earthquake Eng. Struct. Dyn. 44 (12): 2015–2033. https://doi.org/10.1002/eqe.2571.
Dowdell, D., and B. Hamersley. 2000. “Lions’ Gate Bridge north approach: Seismic retrofit.” In Proc., Behaviour of Steel Structures in Seismic Areas: Proc., 3rd Int. Conf.: STESSA 2000, 319–326. Boca Raton, FL: CRC.
Du, X., Y. Zhou, Q. Han, and Z. Jia. 2018. Shaking table tests of a single-span freestanding rocking bridge for seismic resilience and isolation. Technical Rep. No. 2018-0017. Beijing: Key Laboratory of Urban Security and Disaster Engineering of Ministry of Education.
Han, Q., X. Du, J. Liu, Z. Li, L. Li, and J. Zhao. 2009. “Seismic damage of highway bridges during the 2008 Wenchuan earthquake.” Earthquake Eng. Eng. Vibr. 8 (2): 263–273. https://doi.org/10.1007/s11803-009-8162-0.
Han, Q., Z. L. Jia, K. Xu, Y. L. Zhou, and X. L. Du. 2019. “Hysteretic behavior investigation of self-centering double-column rocking piers for seismic resilience.” Eng. Struct. 188 (Jan): 218–232. https://doi.org/10.1016/j.engstruct.2019.03.024.
Ingham, T., S. Rodriguez, M. Nadar, F. Taucer, and C. Seim. 1995. “Seismic retrofit of the Golden Gate Bridge.” In Proc., National Seismic Conf. on Bridges and Highways: Progress in Research and Practice. Washington, DC: Transportation Research Board.
Jones, M. H., L. J. Holloway, V. Toan, and J. Hinman. 1997. “Seismic retrofit of the 1927 Carquinez Bridge by a displacement capacity approach.” In Proc., 2nd National Seismic Conf. on Bridges and Highways: Progress in Research and Practice. Sacramento, CA: California Dept. of Transportation.
Kounadis, A. N., 2018. “The effect of sliding on the rocking instability of multi-rigid block assemblies under ground motion.” Soil Dyn. Earthquake Eng. 104: 1–14. https://doi.org/10.1016/j.soildyn.2017.03.035.
Li, X., D. Zhang, W. M. Yan, Y. J. Chen, and W. C. Xie. 2015. “Shake-table test for a typical curved bridge: Wave passage and local site effects.” J. Bridge Eng. 20 (2): 04014061. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000643.
Makris, N., and M. F. Vassiliou. 2013. “Planar rocking response and stability analysis of an array of free-standing columns capped with a freely supported rigid beam.” Earthquake Eng. Struct. Dyn. 42 (3): 431–449. https://doi.org/10.1002/eqe.2222.
Mander, J. B., and C. T. Cheng. 1997. Seismic resistance of bridge piers based on damage avoidance design. Technical Rep. No. NCEER-97-0014. Buffalo, NY: National Center for Earthquake Engineering Research.
Marriott, D., S. Pampanin, and A. Palermo. 2009. “Quasi-static and pseudo-dynamic testing of unbonded post-tensioned rocking bridge piers with external replaceable dissipaters.” Earthquake Eng. Struct. Dyn. 38 (3): 331–354. https://doi.org/10.1002/eqe.857.
Marriott, D., S. Pampanin, and A. Palermo. 2011. “Biaxial testing of unbonded post-tensioned rocking bridge piers with external replacable dissipaters.” Earthquake Eng. Struct. Dyn. 40 (15): 1723–1741. https://doi.org/10.1002/eqe.1112.
Mashal, M., and A. Palermo. 2014. “Quasi-static experimental testing of emulative and low-damage seismic technologies for accelerated bridge construction (ABC) in seismic areas.” In Proc., National Accelerated Bridge Construction Conf. Miami: Accelerated Bridge Construction University Transportation Center.
MoT (Ministry of Transport of the People’s Republic of China). 2008. Guideline for seismic design of highway bridges. JTG/T B02-01-2008. Beijing: MoT.
Palermo, A., and M. Mashal. 2012. “Accelerated bridge construction (ABC) and seismic damage resistant technology: A New Zealand challenge.” Bull. N. Z. Soc. Earthquake Eng. 45 (3): 123–134.
Palermo, A., S. Pampanin, and G. M. Calvi. 2005. “Concept and development of hybrid solutions for seismic resistant bridge systems.” J. Earthquake Eng. 9 (6): 899–921. https://doi.org/10.1080/13632460509350571.
Palermo, A., S. Pampanin, and D. Marriott. 2007. “Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections.” J. Struct. Eng. 133 (11): 1648–1661. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1648).
Prucz, Z., W. B. Conway, J. E. Schade, and Y. Ouyang. 1997. “Seismic retrofit concepts and details for long-span steel bridges.” In Proc., 2nd National Seismic Conf. on Bridges and Highways: Progress in Research and Practice. Washington, DC: Transportation Research Board.
Rodgers, G. W., J. B. Mander, J. G. Chase, and R. P. Dhakal. 2016. “Beyond ductility: Parametric testing of a jointed rocking beam-column connection designed for damage avoidance.” J. Struct. Eng. 142 (8): C4015006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001318.
Schexnayder, C., L. F. Alarcón, E. D. Antillo, B. C. Morales, and M. Lopez. 2014. “Observations on bridge performance during the Chilean earthquake of 2010.” J. Constr. Eng. Manage. 140 (4): B4013001. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000452.
Shrestha, B., H. Hao, and K. Bi. 2015. “Seismic response analysis of multiple-frame bridges with unseating restrainers considering ground motion spatial variation and SSI.” Adv. Struct. Eng. 18 (6): 873–891. https://doi.org/10.1260/1369-4332.18.6.873.
Solberg, K., N. Mashiko, J. B. Mander, and R. P. Dhakal. 2009. “Performance of a damage-protected highway bridge pier subjected to bidirectional earthquake attack.” J. Struct. Eng. 135 (5): 469–478. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:5(469).
Wang, P., M. Zhao, and X. Du. 2019. “Simplified formula for earthquake-induced hydrodynamic pressure on round-ended and rectangular cylinders surrounded by water.” J. Eng. Mech. 145 (2): 04018137. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001567.
White, S., and A. Palermo. 2016. “Quasi-static testing of posttensioned nonemulative column-footing connections for bridge piers.” J. Bridge Eng. 21 (6): 04016025. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000872.
Information & Authors
Information
Published In
Copyright
© 2019 American Society of Civil Engineers.
History
Received: Sep 28, 2018
Accepted: Mar 25, 2019
Published online: May 20, 2019
Published in print: Aug 1, 2019
Discussion open until: Oct 20, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.