Quasi-Static Testing of Posttensioned Nonemulative Column-Footing Connections for Bridge Piers
Publication: Journal of Bridge Engineering
Volume 21, Issue 6
Abstract
Accelerated bridge construction (ABC) is gaining popularity because it offers a number of advantages over conventional methods of construction. Prefabrication of bridge components for rapid on-site assembly is a highly effective ABC approach. Bridge substructures are traditionally cast in place with columns that form plastic hinges during earthquake events. Recent studies have explored new precast column-footing connections that either emulate the seismic performance of monolithic construction (emulative) or show improved seismic performance with the use of rocking connections (nonemulative). This paper presents findings from half-scale experimental testing of one emulative and two nonemulative precast column-footing connections. The two nonemulative connections were designed and detailed to sustain limited damage that can be rapidly and cost-effectively repaired using predefined methodologies. The tested connections showed promising results for use in regions of moderate to high seismicity; however, further developments of the proposed construction and repair methodologies are required for their full potential to be realized.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the New Zealand Ministry of Business, Innovation and Employment—Natural Hazard Research Platform for financially supporting this project as part of the research program Advanced Bridge Construction and Design (ABCD). The authors also thank Mustafa Mashal for his assistance in design and testing throughout project and technicians Gavin Keats and Russell McConchie for lab assistance.
References
AASHTO. (2015). Guide specifications for LRFD seismic bridge design, 2nd edition, with 2012, 2014 and 2015 interim revisions, Washington, DC.
ACI (American Concrete Institute). (2014). “Building code requirements for structural concrete and commentary.” ACI 318-14, Farmington Hills, MI.
Ameli, M., Parks, J., Brown, D., Pantelides, C., Sletten, J., and Swanwick, C. (2013). “Seismic evaluation of grouted splice sleeve connections for precast reinforced concrete bridge piers.” Proc., 7th National Seismic Conf. on Bridges and Highways: Bridge Resilience for Earthquakes & Other Natural Hazards, Kapur, J., and Ostrom, T., Eds., MCEER, Univ. at Buffalo, State Univ. of New York, Buffalo, NY, Paper A3-5.
Andisheh, K., Scott, A., and Palermo, A. (2014). “Preliminary estimation of reduction factors in mechanical properties of steel reinforcement due to pitting simulated corrosion.” Proc., New Zealand Society for Earthquake Engineering Annual Conf., New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Billington, S. L., Barnes, R. W., and Breen, J. E. (1999). “A precast segmental substructure system for standard bridges.” PCI J., 44(4), 56–73.
Brenes, F. J., Wood, S. L., and Kreger, M. E. (2006). “Anchorage requirements for grouted vertical-duct connectors in precast bent cap systems.” FHWA/TX-06/0-4176-1, Center for Transportation Research, Univ. of Texas at Austin, Austin, TX.
Christopoulos, C. (2004). “Frequency response of flag-shaped single degree-of-freedom hysteretic systems.” J. Eng. Mech., 894–903.
Culmo, M. P. (2011). “Accelerated bridge construction: Experience in design, fabrication, and erection of prefabricated bridge elements and systems.” Federal Highway Administration Rep. No. FHWA-HIF-12-013, U.S. Dept. of Transportation, Washington, DC.
Davis, P. M., Todd, M. J., Eberhard, M. O., and Stanton, J. F. (2012). “Unbonded pre-tensioned columns for bridges in seismic regions.” PEER Rep. 2014/04, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
ElGawady, M., Booker, A. J., and Dawood, H. M. (2010). “Seismic behavior of posttensioned concrete-filled fiber tubes.” J. Compos. Constr., 616–628.
Finnsson, G. (2013). “Unbonded pre-tensioned bridge columns with hybrid fiber-reinforced concrete shells.” M.Sc. thesis, Univ. of Washington, Seattle.
Haber, Z. B., Saiidi, M. S., and Sanders, D. H. (2014). “Seismic performance of precast columns with mechanically spliced column-footing connections.” ACI Struct. J., 111(3), 639–650.
Haraldsson, O., Janes, T., Eberhard, M. O., and Stanton, J. F. (2013). “Seismic resistance of socket connection between footing and precast column.” J. Bridge Eng., 910–919.
Hewes, J. T., and Priestley, M. J. N. (2002). Seismic design and performance of precast concrete segmental bridge columns, Caltrans, Sacramento, CA.
Hieber, D. G., Wacker, J. M., Stanton, J. F., and Eberhard, M. O. (2005). Precast concrete pier systems for rapid Construction of bridges in seismic regions, Washington State Transportation Center (TRAC), Seattle.
Kapur, J., et al. (2012). “Best practices regarding performance of ABC connections in bridges subjected to multihazard and extreme events.” NCHRP Project No. 20-68A, Transportation Research Board, Washington, DC.
Khaleghi, B., et al. (2012). “Accelerated bridge construction in Washington state: From research to practice.” PCI J., 57(4), 34–49.
Kurama, Y. (2004). “A friction damper for post-tensioned precast concrete moment frames.” PCI J., 49(4), 112–133.
Lee, W. K., and Billington, S. L. (2011). “Performance-based earthquake engineering assessment of a self-centering, post-tensioned concrete bridge system.” Earthquake Eng. Struct. Dyn., 40(8), 887–902.
Lehman, D. E., Gookin, S. E., Nacamuli, A. M., and Moehle, J. P. (2001). “Repair of earthquake-damaged bridge columns.” ACI Struct. J., 98(2), 233–242.
Marriott, D. (2009). “The development of high - performance post - tensioned rocking systems for the seismic design of structures.” Ph.D. thesis, Univ. of Canterbury, Christchurch, New Zealand.
Marriott, D., Pampanin, S., Bull, D., and Palermo, A. (2009). “A probabilistic seismic loss assessment of advanced post-tensioned precast bridge systems.” Proc., New Zealand Society for Earthquake Engineering Annual Conf., New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Marsh, M. L., Wernli, M., Garrett, B. E., Stanton, J. F., Eberhard, M. O., and Weinert, M. D. (2011). “Application of accelerated bridge construction connections in moderate-to-high seismic regions.” NCHRP Rep. 698, Transportation Research Board, Washington, DC.
Motaref, S., Saiidi, M. S., and Sanders, D. H. (2011). “Seismic response of precast bridge columns with energy dissipating joints.” Rep. No. CCEER-11-01, Center for Civil Engineering Earthquake Research, Univ. of Nevada, Reno, NV.
Motaref, S., Saiidi, M. S., and Sanders, D. H. (2014). “Shake table studies of energy-dissipating segmental bridge columns.” J. Bridge Eng., 186–199.
Nelson, M., Lai, Y. C., and Fam, A. (2008). “Moment connection of concrete-filled fiber reinforced polymer tubes by direct embedment into footings.” Adv. Struct. Eng., 11(5), 537–547.
Noureddine, I. (1996). “Plastic energy absorption capacity of #18 reinforcing b ar splices under monotonic loading.” M.Sc. thesis, California State Univ., Sacramento, CA.
NZCS (New Zealand Concrete Society). (2010). PRESSS design handbook, Wellington, New Zealand.
Osanai, Y., Watanabe, F., and Okamoto, S. (1996). “Stress transfer mechanism of socket base connections with precast concrete columns.” ACI Struct. J., 93(3), 266–276.
Ou, Y.-C., Oktavianus, Y., and Tsai, M.-S. (2013). “An emulative precast segmental concrete bridge column for seismic regions.” Earthquake Spectra, 29(4), 1441–1457.
Palermo, A. (2004). “The use of controlled rocking in the seismic design of bridges.” Ph.D. thesis, Politecnico Di Milano, Milan, Italy.
Palermo, A., Pampanin, S., and Marriott, D. (2007). “Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections.” J. Struct. Eng., 1648–1661.
Palermo, A., et al. (2011). “Lessons learnt from 2011 Christchurch earthquakes: Analysis and assessment of bridges.” Bull. N. Z. Soc. Earthquake Eng., 44(4), 319–333.
Priestley, M. J. N. (1991). “Overview of PRESSS research program.” PCI J., 36(4), 50–57.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York.
Priestley, M. J. N., Sritharan, S., Conley, J. R., and Pampanin, S. (1999). “Preliminary results and conclusions from the PRESSS five-story precast concrete test building.” PCI J., 44(6), 42–67.
Restrepo, J. I., Tobolski, M. J., and Matsumoto, E. E. (2011). “Development of a precast bent cap system for seismic regions.” NCHRP Rep. 681, Transportation Research Board, Washington, DC.
Rowell, S. P., Grey, C. E., Woodson, S. C., and Hager, K. P. (2009). “High strain-rate testing of mechanical couplers.” ERDC TR-09-8, U.S. Army Corps of Engineers. Engineer Research and Development Center, Vicksburg, MS.
Sarti, F., Smith, T. J., Palermo, A., Pampanin, S., Bonardi, D., and Carradine, D. M. (2013). “Experimental and analytical study of replaceable buckling-restrained fused-type (BRF) mild steel dissipaters.” Proc., New Zealand Society for Earthquake Engineering Annual Conf., New Zealand Society for Earthquake Engineering, Wellington, New Zealand.
Schaefer, J. (2013). “Unbonded pre-tensioned bridge columns with rocking detail.” M.Sc. thesis, Univ. of Washington, Seattle.
Sideris, P., Anagnostopoulou, M., Aref, A., and Filiatrault, A. (2010). “Seismic performance of precast segmental bridges.” Proc., 9th US National and 10th Canadian Conf. on Earthquake Engineering: Reaching Beyond Borders, Earthquake Engineering Research Institute, Oakland, CA.
Stanton, J. F., Hawkins, N. M., and Eberhard, M. O. (1992). “Seismic connections for precast concrete structures.” Proc., Earthquake Engineering, 10th World Conf., Balkema, Rotterdam, the Netherlands.
Stanton, J. F., Stone, W. C., and Cheok, G. S. (1997). “Hybrid reinforced precast frame for seismic regions.” PCI J., 42(2), 20–32.
Steuck, K. P., Pang, J. B. K., Eberhard, M. O., and Stanton, J. F. (2007). Anchorage of large-diameter reinforcing bars grouted into ducts, Univ. of Washington, Seattle.
Tazarv, M. (2014). “Next generation of bridge columns for accelerated bridge construction in high seismic zones.” Ph.D. thesis, Univ. of Nevada, Reno, NV.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Mar 2, 2015
Accepted: Oct 5, 2015
Published online: Feb 3, 2016
Published in print: Jun 1, 2016
Discussion open until: Jul 3, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.