Development of an Experimentally Validated Analytical Model for Modular Bridge Expansion Joint Behavior
Publication: Journal of Bridge Engineering
Volume 19, Issue 2
Abstract
Modular bridge expansion joints (MBEJ) are large-capacity systems placed between two superstructure segments designed to provide safe joint crossing based on anticipated bridge movements. Locations of discontinuity in bridges are often recognized as weak links and therefore characterizing the behavior of expansion systems installed at deck joints under various excitations is critical to support the forecasting of bridge functionality. This paper presents the development of an analytical model representative of a common modular bridge expansion joint including its critical components, such as friction elements, equidistant devices, support bars, and center beams. The model is then validated through full-scale experimental testing of the joint. The results of this study offer a predictive model for the longitudinal motion of bridge joints excited through anticipated service or extreme events, which can be used to help determine local and global failure within the joint and make inferences as to how a bridge system could be affected. Such models provide a key step toward aiding design efforts, enabling more accurate specification of MBEJs, and supporting functionality-based risk assessment for bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented in this paper was supported by the NCHRP/TRB IDEA program, project No. 147. The IDEA program seeks to foster innovative and implementable designs for the benefit of the transportation industry, and this support is gratefully acknowledged. Much appreciation is directed toward Watson Bowman Acme Corporation for their material support of this project. In addition, the contributions of the first author were supported in part by a NSF Graduate Research Fellowship through Grant No. 0940902. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.
References
AASHTO. (2012). “Section 14: Joints and bearings.” AASHTO LRFD bridge design specifications, 6th Ed., Washington, DC, 1–89.
Ancich, E. J., Chirgwin, G. J., and Brown, S. C. (2006). “Dynamic anomalies in a modular bridge expansion joint.” J. Bridge Eng., 541–554.
Baker Engineering and Energy. (2006). “Evaluation of various types of bridge deck joints.” Final Rep. 510, Arizona DOT, Phoenix.
Banerjee, S., and Shinozuka, M. (2008). “Experimental verification of bridge seismic damage states quantified by calibrating analytical models with empirical field data.” J. Earthquake Eng. Eng. Vib., 7(4), 383–393.
Bi, K., Hao, H., and Chouw, N. (2009). “Required separation distance between decks and at abutments of a bridge crossing a canyon site to avoid seismic pounding.” Earthquake Eng. Struct. Dynam., 39(3), 303–323.
Bradford, P. (2006). “Equidistance in modular expansion joints.” Proc., 2006 IJBRC Conf., International Joints and Bearings Research Council, 237–248.
Bradford, P. (2009). “Seismic joint testing program completion.” American Segmetal Bridge Institute, 〈http://www.asbi-assoc.org〉.
CALTRANS. (1994). “Bridge deck joints and deck seals.” Memo to Designers 7-10, Sacramento, CA.
Chouw, N., and Hao, H. (2009). “Seismic design of bridge structures with allowance for large relative girder movements to avoid pounding.” Bulletin of the New Zealand Society for Earthquake Engineering, 42(2), 75–85.
Crocetti, R., and Edlund, B. (2003). “Fatigue performance of modular bridge expansion joints.” J. Perform. Constr. Facil., 167–176.
DesRoches, R., Choi, E., Leon, R. T., Dyke, S. J., and Aschheim, M. (2004). “Seismic response of multiple span steel bridges in central and southeastern United States. I. As built.” J. Bridge Eng., 464–472.
Dexter, R. J., Connor, R. J., and Kaczinski, M. R. (1997). “Fatigue design of modular bridge expansion joints.” Transportation Research Board (TRB), National Cooperative Highway Research Program (NCHRP) Rep. 402, National Academy Press, Washington, DC.
Dexter, R. J., Mutziger, M., and Osberg, C. (2002). “Performance testing for modular bridge joint systems.” Transportation Research Board (TRB), National Cooperative Highway Research Program (NCHRP) Rep. 467, National Academy Press, Washington, DC.
Dexter, R. J., Osberg, C., and Mutziger, M. (2001). “Design, specification, installation, and maintenance of modular bridge expansion joint systems.” J. Bridge Eng., 529–538.
Fenves, G. L. (1992). “Earthquake analysis and response of multi-span bridges and viaduct structures.” Proc., Seminar Seismic Design and Retrofit of Bridges, Earthquake Engineering Research Center, Univ. of California Berkeley, Berkeley, CA, 214–244.
Floren, A., and Mohammadi, J. (2001). “Performance-based design approach in seismic analysis of bridges.” J. Bridge Eng., 37–45.
Mazzoni, S., McKenna, F. T., Scott, M. H., and Fenves, G. L. (2007). Open system for earthquake engineering simulation user manual, Pacific Earthquake Engineering Research Center, 〈http://www.opensees.berkeley.edu〉.
Mokha, A., Constantinou, M. C., and Reinhorn, A. M. (1988). “Teflon bearings in aseismic base isolation: Experimental studies and mathematical modeling.” Federal Highway Administration (FHA), Technical Rep. National Center Earthquake Engineering Research (NCEER) 88-0038, Multidisciplinary Center for Earthquake Engineering Research (MCEER), Buffalo, NY.
Nielson, B., and DesRoches, R. (2007). “Seismic fragility methodology for highway bridges using a component level approach.” Earthquake Eng. Struct. Dynam., 36(6), 823–839.
Pourzeynali, S., and Hosseinnezhad, A. (2009). “Reliability analysis of bridge structures for earthquake excitations.” Scientia Iranica, 16(1), 1–15.
Quan, G., and Kawashima, K. (2010). “Effect of finger expansion joints on seismic response of bridges.” Struct. Eng. Earthquake Eng., 27(1), 1–13.
Ramanathan, K. (2012). “Next generation seismic fragility curves for California bridges incorporating the evolution in seismic design philosophy.” Ph.D. thesis, Georgia Institute of Technology, Atlanta.
Roeder, C. W. (1993). Fatigue cracking in modular expansion joints, Washington State DOT, Olympia, WA.
Saiidi, M., Maragakis, E., Feng, S., (1996). “Parameters in bridge restrainer design for seismic retrofit.” J. Struct. Eng., 61–68.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 15, 2012
Accepted: Jun 3, 2013
Published online: Jun 5, 2013
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.