Selection of Durable Closure Pour Materials for Accelerated Bridge Construction
Publication: Journal of Bridge Engineering
Volume 15, Issue 6
Abstract
With the public’s demands for reduced construction time and traveling delays, full-depth precast bridge decks or decked bulb tees are being more widely used. When these systems are used, precast elements are brought to the construction site ready to be set in place and quickly joined together. Then, a concrete closure pour (CP) completes the connection. The selection of CP materials is critical. The procedure and methods for selecting durable CP materials are discussed in this paper. The accelerated construction is quantified as two categories: overnight cure of CP materials and 7-day cure of CP materials. For both categories, candidate materials are selected first based on literature review of published data as well as tests of compressive strength and flow and workability. Then, the performance criteria for selecting durable CP materials for both categories are developed based on durability tests of selected candidate materials. These durability tests include freezing-and-thawing durability, shrinkage, bond, and permeability tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported in this paper has been performed under the ongoing National Cooperative Highway Research Program (NCHRP) 10-71 project, “Cast-in-Place Reinforced Concrete Connections for Precast Deck Systems.” The Principal Investigator of the project is Professor Catherine French at the University of Minnesota (UMN). Other research team members include R. Eriksson, C. Prussack, A. Schultz, S. Seguirant, and C. Shield. Robert Gulyas of BASF Construction Chemicals, LLC provided valuable comments in our testing program. The writers gratefully acknowledge the support by BASF Construction Chemicals, LLC, CTS Cement Manufacturing Corporation, Dow Reichhold, Specialty Latex LLC, Enco Materials, Inc., Five Star Products, Inc., Lafarge North America, Inc., etc. The opinions and conclusions expressed or implied in this paper are those of the research agency. They are not necessarily those of the Transportation Research Board, the National Research Council, the FHWA, the American Association of State Highway and Transportation Officials, or the individual states participating in the National Cooperative Highway Research Program. The writers would also like to acknowledge Nancy Roberts, Ken Thomas, and Larry Roberts of the Department of Civil and Environmental Engineering at the University of Tennessee Knoxville (UTK) for their assistance with the laboratory testing. Ziling (Ben) Xue, Paul, and Wilma Ziegler, Professor of the Department of Chemistry at UTK, assisted with the permeability tests.
References
AASHTO Designation. (1998). “Standard practice for estimating the cracking tendency of concrete.” PP 34-99, Washington, D.C.
American Concrete Institute. (2008). “Building code requirements for structural concrete and commentary.” ACI Committee 318, Farmington Hills, Mich.
Colorado Department of Transportation (CDOT) Specifications Committee. (2005). Colorado DOT’s 2005 standard specifications for road and bridge construction, Denver.
Folliard, K. J., et al. (2006). “Preventing ASR/DEF in new concrete: Final report.” Rep. No. 0-4085-5, Center for Transportation Research, Texas Dept. of Transportation, Austin, Tex.
Ghanem, H., Phelan, S., Senadheera, S., and Pruski, K. (2008). “Chloride ion transport in bridge deck concrete under different curing durations.” J. Bridge Eng., 13(3), 218–225.
Glass, G. K., and Buenfeld, N. R. (1995). “Chloride threshold levels for corrosion induced deterioration of steel in concrete.” Chloride Penetration into Concrete, Proc., Int. RILEM Workshop, RILEM, Bagneux, France, 429–440.
Goodspeed, C. H., Vanikar, S., and Cook, R. A. (1996). “High-performance concrete defined for highway structures.” Concr. Int., 18(2), 62–67.
Gulyas, R. J., and Champa, J. T. (1997). “Use of composite testing for evaluation of keyway grout for precast prestressed bridge beams.” ACI Mater. J., 94(3), 244–250.
Gulyas, R. J., Wirthlin, G. J., and Champa, J. T. (1995). “Evaluation of keyway grout test methods for precast concrete bridges.” PCI J., 40(1), 44–57.
Issa, M. A., Ribeiro do Valle, C. L., Abdalla, H. A., Islam, S., and Issa, M. A. (2003). “Performance of transverse joint grout materials in full-depth precast concrete bridge deck systems.” PCI J., 48(4), 92–103.
Lawler, J. S., Connolly, J. D., Krauss, P. D., Tracy, S. L., and Ankenman, B. E. (2007). “Guidelines for concrete mixtures containing supplementary cementitious materials to enhance durability of bridge decks.” NCHRP Project No. 18-08A, Rep. No. 566, Transportation Research Board, Washington, D.C.
Li, L., Ma, Z., Griffey, M. E., and Oesterle, R. G. (2010). “Improved longitudinal joint details in decked bulb tees for accelerated bridge construction: Concept development.” J. Bridge Eng., 15(3), 327–336.
Matsumoto, E., Waggoner, M. C., Sumen, G., Kreger, M. E., and Breen, J. E. (2001). “Development of a precast bent cap system.” Project Summary Rep. No. 1748-S, Univ. of Texas at Austin, Austin, Tex.
Menkulasi, F., and Roberts-Wollmann, C. L. (2005). “Behavior of horizontal shear connections for full-depth precast concrete bridge decks on prestressed I—Girders.” PCI J., 50(3), 60–73.
Mrinmay, B. (1986). “Precast bridge deck design system.” PCI J., 31(2), 40–86.
Nottingham, D. (1996). “Joints grouting in Alaskan bridges and dock decks.” Concr. Int., 18(2), 45–48.
Russell, H. G., Miller, R. A., Ozyildirim, H. C., and Tadros, M. K. (2006). “Compilation and evaluation of results from HPC bridge projects, volume 1: Final report.” Rep. No. FHWA-HRT-05-056, Federal Highway Administration, Washington, D.C.
Russell, H. G., and Ozyildirim, H. C. (2006). “Revising high performance concrete classifications.” Concr. Int., 28(8), 43–49.
Scholz, D. P., Wallenfelsz, J. A., Lijeron, C., Roberts-Wollmann, C. L., and Davis, R. T. (2007). “Recommendations for the connection between full-depth precast bridge deck panel systems and precast I—Beams.” Rep. No. FHWA/VTRC 07-CR17, Virginia Transportation Research Council, Virginia Dept. of Transportation, Richmond, Va.
Tepke, D. G., and Tikalsky, P. J. (2007). “Best engineering practices guide for bridge deck durability report.” Feb. 24.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Jul 8, 2009
Accepted: Feb 5, 2010
Published online: Feb 17, 2010
Published in print: Nov 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.