Abstract
Establishing a lunar base requires the design and construction of infrastructure that can withstand the Moon’s hazardous environment. This study explores the effects of micrometeoroid impacts on a biopolymer-bound soil composite (BSC), a novel construction material that leverages in situ resource utilization to significantly reduce costs associated with resource transportation from Earth. Using a small fraction of biopolymer to bind regolith, BSC can be used to build radiation and micrometeoroid shielding for habitats, stable landing and launching pads, and pavements that help to contain dust. To determine the relationship between hypervelocity impacts and BSC material damage, 19 hypervelocity impact experiments were conducted on BSC targets. Analytical power-law relationships were derived to predict transient crater dimensions, such as volume and diameter, from projectile features, such as diameter, density, and velocity. The scaling exponents determined for BSC transient crater volume and diameter are comparable to those of quartzite, sandstone, and basalt and indicate that crater formation in BSC is largely driven by the kinetic energy of the projectile, as expected for cohesive low-porosity materials.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes generated or used during this study are available from the corresponding author by request, including the experimental hypervelocity impact data, BSC sample mix design data, and crater analysis methods.
Acknowledgments
This work was supported by a NASA Space Technology Research Fellowship. We gratefully acknowledge the technical contributions from the teams at the NASA White Sands Testing Facility and NASA Johnson Space Center’s Astromaterials Research and Exploration Science. We also would like to thank the Lepech Group, including Isamar Rosa and Andrea Coto, for their support and feedback.
References
Allende, M., M. Lepech, and D. Loftus. 2018. “Scaling impact crater dimensions to predict micrometeorite damage of biopolymer-stabilized regolith.” In Proc. ASCE Earth and Space Conf. 2018. Reston, VA: ASCE.
ASTM. 2018. “Standard test method for compressive strength of cylindrical concrete specimens.” ASTM C39/C39M. West Conshohocken, PA: ASTM International.
Bell, L. 2011. “Top-level considerations for planning lunar/planetary habitat structures.” J. Aerosp. Eng. 24 (3): 349–360. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000062.
Benaroya, H. 1998. “Economic and technical issues for lunar development.” J. Aerosp. Eng. 11 (4): 111–118. https://doi.org/10.1061/(ASCE)0893-1321(1998)11:4(111).
Benaroya, H., L. Bernold, and K. M. Chua. 2002. “Engineering, design and construction of lunar bases.” J. Aerosp. Eng. 15 (2): 33–45. https://doi.org/10.1061/(ASCE)0893-1321(2002)15:2(33).
Benaroya, H., and M. Ettouney. 1992a. “Design and construction considerations for lunar outpost.” J. Aerosp. Eng. 5 (3): 261–273. https://doi.org/10.1061/(ASCE)0893-1321(1992)5:3(261).
Benaroya, H., and M. Ettouney. 1992b. “Framework for evaluation of lunar base structural concepts.” J. Aerosp. Eng. 5 (2): 187–198. https://doi.org/10.1061/(ASCE)0893-1321(1992)5:2(187).
Bodiford, M. P., K. H. Burks, M. R. Perry, R. W. Cooper, and M. R. Fiske. 2006. “Lunar in situ materials-based habitat technology development efforts at NASA/MSFC.” In Proc. ASCE Earth and Space Conf., 1–8. Reston, VA: ASCE.
Burchell, M. J., and L. Whitehorn. 2003. “Oblique incidence hypervelocity impacts on rock.” MNRAS 341 (1): 192–198. https://doi.org/10.1046/j.1365-8711.2003.06385.x.
Davison, T. M., G. S. Collins, D. Elbeshausen, K. Wünnemann, and A. Kearsley. 2011. “Numerical modeling of oblique hypervelocity impacts on strong ductile targets.” Meteorit. Planet. Sci. 46 (10): 1510–1524. https://doi.org/10.1111/j.1945-5100.2011.01246.x.
Dufresne, A., M. H. Poelchau, T. Kenkmann, A. Deutsch, T. Hoerth, F. Schäfer, and K. Thomas. 2013. “Crater morphology in sandstone targets: The MEMIN impact parameter study.” Meteorit. Planet. Sci. 48 (1): 50–70. https://doi.org/10.1111/maps.12024.
Elbeshausen, D., K. Wünnemann, and G. S. Collins. 2009. “Scaling of oblique impacts in frictional targets: Implications for crater size and formation mechanisms.” Icarus 204 (2): 716–731. https://doi.org/10.1016/j.icarus.2009.07.018.
Gaier, J. R. 2007. The effects of lunar dust on EVA systems during the Apollo missions. Cleveland, OH: NASA Glenn Research Center.
Gault, D., W. Quaide, and V. Oberbeck. 1968. “Impact cratering mechanics and structures.” In Shock metamorphism of natural materials, edited by B. French and N. Short, 87–99. Baltimore: Mono Books.
Gault, D. E. 1973. “Displaced mass, depth, diameter, and effects of oblique trajectors for impact craters formed in dense crystalline rocks.” Moon 6 (1–2): 32–44.
Güldemeister, N., K. Wünnemann, and M. H. Poelchau. 2015. “Scaling impact crater dimensions in cohesive rock by numerical modeling and laboratory experiments.” In Vol. of 518 Geological society of America, 17–29. Ottawa: Canadian Science Publishing. https://doi.org/10.1130/2015.2518(02).
Heiken, G., D. Vaniman, and B. French. 1991. Lunar sourcebook: A user’s guide to the moon. Houston: Cambridge University Press.
Holsapple, K. 1993. “The scaling of impact processes in planetary sciences.” Annu. Rev. Earth Planet. Sci. 21: 333–373. https://doi.org/10.1146/annurev.ea.21.050193.002001.
Holsapple, K. A., and K. R. Housen. 2004. “The cratering database: Making code jockeys honest.” In Proc., 35th Lunar and Planetary Science Conf. Houston: Lunar and Planetary Institute.
Holsapple, K. A., and K. R. Housen. 2007. “A crater and its ejecta: An interpretation of deep impact.” Icarus 191 (2 Suppl): 586–597. https://doi.org/10.1016/j.icarus.2006.08.035.
Kenkmann, T., K. Wunnemann, A. Deutsch, M. Poelchau, F. Schafer, and K. Thomas. 2011. “Impact cratering in Sandstone: The MEMIN pilot study and the effect of pore water.” Meteorit. Planet. Sci. 46 (Jun): 890–902. https://doi.org/10.1111/j.1945-5100.2011.01200.x.
Khalili, E. 1989. “Lunar structures generated and shielded with on-site materials.” J. Aerosp. Eng. 2 (3): 119–129. https://doi.org/10.1061/(ASCE)0893-1321(1989)2:3(119).
Lange, M., T. Ahrens, and M. Boslough. 1984. “Impact cratering and spall failure of gabbro.” Icarus 58 (3): 383–395. https://doi.org/10.1016/0019-1035(84)90084-8.
Melosh, H. 1989. “Monographs of geology and geophysics.” In Impact cratering: A geologic process. New York: Oxford University Press.
Moore, H., R. MacCormack, and D. Gault. 1963. “Fluid impact craters and hypervelocity: High-velocity impact experiments in metals and rocks.” In Proc., Symp. on Hypervelocity Impact, 367–399. Reston, VA: USGS.
Moorhead, A. V., H. M. Koehler, and W. J. Cooke. 2015. NASA meteoroid engineering model release 2.0. Huntsville, Alabama: NASA Marshall Space Flight Center.
NASA. 2008. “Advanced space transportation program: Paving the highway to space.” Accessed May 10, 2019. https://www.nasa.gov/centers/marshall/news/background/facts/astp.html.
Poelchau, M. H., T. Kenkmann, T. Hoerth, F. Schäfer, M. Rudolf, and K. Thomas. 2014. “Impact cratering experiments into quartzite, sandstone and tuff: The effects of projectile size and target properties on spallation.” Icarus 242 (Nov): 211–224. https://doi.org/10.1016/j.icarus.2014.08.018.
Poelchau, M. H., T. Kenkmann, K. Thomas, T. Hoerth, A. Dufresne, and F. Schäfer. 2013. “The MEMIN research unit: Scaling impact cratering experiments in porous sandstones.” Meteorit. Planet. Sci. 48 (1): 8–22. https://doi.org/10.1111/maps.12016.
Ray, C. S., S. T. Reis, S. Sen, and J. S. O’Dell. 2010. “JSC-1A lunar soil simulant: Characterization, glass formation, and selected glass properties.” J. Non-Cryst. Solids 356 (44–49): 2369–2374. https://doi.org/10.1016/j.jnoncrysol.2010.04.049.
Roedel, H. 2017. “On the compressive strength and sustainability of protein bound concretes.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Stanford Univ.
Roedel, H., M. D. Lepech, and D. J. Loftus. 2014. “Protein-regolith composites for space construction.” In Proc., ASCE Earth and Space Conf. 2014, 291–300. Reston, VA: ASCE.
Rosa, I., H. Roedel, M. Lepech, and D. Loftus. 2015. “Creation of statistically equivalent periodic unit cells for protein-bound soils.” In Proc., ASME Int. Mechanical Engineering Congress and Exposition 2015. New York: ASME.
Ruess, F., J. Schaenzlin, and H. Benaroya. 2006. “Structural design of a lunar habitat.” J. Aerosp. Eng. 19 (3): 133–157. https://doi.org/10.1061/(ASCE)0893-1321(2006)19:3(133).
Sherwood, B. B., and L. Toups. 1992. “Technical issues for lunar base structures.” J. Aerosp. Eng. 5 (2): 175–186. https://doi.org/10.1061/(ASCE)0893-1321(1992)5:2(175).
Stubbs, T. J., R. R. Vondrak, and W. M. Farrell. 2005. “Impact of dust on lunar exploration.” In Dust in planetary systems, 239–243. Washington, DC: NASA.
Suzuki, A. I., C. Okamoto, K. Kurosawa, T. Kadono, S. Hasegawa, and T. Hirai. 2018. “Increase in cratering efficiency with target curvature in strength-controlled craters.” Icarus 301 (Feb): 1–8. https://doi.org/10.1016/j.icarus.2017.10.019.
The United States. 2018. Space policy directive-1: Reinvigorating America’s human space exploration program. Washington, DC: White House Office.
US Air Force Institute of Technology. 1991. Critical technologies for national defense. Wright-Patterson AFB, OH: American Institute of Aeronautics and Astronautics.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 7, 2019
Accepted: Sep 9, 2019
Published online: Jan 8, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 8, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.