Temperature Sensing and Hydration Study of Carbon Nanofiber Aggregates
Publication: Journal of Aerospace Engineering
Volume 33, Issue 2
Abstract
Fiber research in concrete construction technology has been helping to prevent catastrophic disasters due to the loss of structural integrity and service life by functioning as structural health monitoring (SHM) technology. Past studies demonstrated the use of self-consolidating carbon nanofiber concrete (SCCNFC) as a structural sensor, which led to the development of carbon nanofiber aggregates (CNFAs) to be used as strain sensors to determine localized strains in concrete structures. This paper examines the effect of temperature and hydration on CNFAs. In the temperature study, the specimens containing CNFA were monitored for temperature sensing capability through one complete cooling and heating cycle ( to 90°C), giving the mathematical model to predict the thermal behavior of CNFAs used to monitor the temperature of embedded structures. In the hydration study of CNFAs, this paper critically examines the effect of water on the electrical resistance of CNFAs and demonstrates the necessity of the waterproof coating in embedded CNFAs for reliable SHM.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request for the following items:
1.
Temperature versus ERV for Six Embedded CNFAs and Their Average
2.
ERV versus Time for Groups A and B with SAC Waterproof Coating
3.
ERV versus Time for Groups C and D with SAC Waterproof Coating
4.
ERV versus Time for Groups E and F with SAC Waterproof Coating
5.
ERV versus Time for Groups G and H with SAC Waterproof Coating
6.
Resistance versus Time for Groups E and G
7.
Follow-Up Experiment ERV and Temperature versus Time
Acknowledgments
This material is based upon work supported by the National Science Foundation under Grant 0634279. Opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation.
References
Avinash, G., Y. L. Mo, C. Yuhua, C. Jinghong, and J. Bhagirath. 2019. “Carbon nanofiber aggregate sensors for sustaining resilience of civil infrastructures to multi-hazards.” Adv. Civ. Eng. Tech. 3 (1): 263–269. https://doi.org/10.31031/ACET.2019.03.000551.
Chang, C., M. Ho, G. Song, Y.-L. Mo, and H. Li. 2009. “A feasibility study of self-heating concrete utilizing carbon nanofiber heating elements.” Smart Mater. Struct. 18 (12): 127001. https://doi.org/10.1088/0964-1726/18/12/127001.
Chen, B., K. Wu, and W. Yao. 2004. “Conductivity of carbon fiber reinforced cement-based composites.” Cem. Concr. Compos. 26 (4): 291–297. https://doi.org/10.1016/S0958-9465(02)00138-5.
Chen, P.-W., and D. D. L. Chung. 1993a. “Concrete reinforced with up to 0.2 vol% of short carbon fibers.” Composites 24 (1): 33–52. https://doi.org/10.1016/0010-4361(93)90261-6.
Chen, P.-W., and D. D. L. Chung. 1993b. “Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection.” Smart Mater. Struct. 2 (1): 22–30. https://doi.org/10.1088/0964-1726/2/1/004.
Chung, D. D. L. 1995. “Strain sensors based on the electrical resistance change accompanying the reversible pull-out of conducting short fibers in a less conducting matrix.” Smart Mater. Struct. 4 (1): 59–61. https://doi.org/10.1088/0964-1726/4/1/009.
Chung, D. D. L. 2000. “Cement reinforced with short carbon fibers: A multifunctional material.” Composites Part B 31 (6–7): 511–526. https://doi.org/10.1016/S1359-8368(99)00071-2.
Chung, D. D. L. 2004. “Self-healing structural materials.” Smart Mater. Struct. 13 (3): 562–565. https://doi.org/10.1088/0964-1726/13/3/015.
Gao, D., M. Sturm, and Y. L. Mo. 2009. “Electrical resistance of carbon-nanofiber concrete.” Smart Mater. Struct. 18 (9): 095039. https://doi.org/10.1088/0964-1726/18/9/095039.
Han, B., L. Zhang, and J. Ou. 2010. “Influence of water content on conductivity and piezo-resistivity of cement-based material with both carbon fiber and carbon black.” J. Wuhan Univ. Technol.-Mater. Sci. Ed. 25 (1): 147–151. https://doi.org/10.1007/s11595-010-1147-z.
Howser, R. N., H. B. Dhonde, and Y. L. Mo. 2011. “Self-sensing of carbon nanofiber concrete columns subjected to reversed cyclic loading.” Smart Mater. Struct. 20 (8): 085031. https://doi.org/10.1088/0964-1726/20/8/085031.
Howser, R. N., and Y. L. Mo. 2013. “Development of carbon nanofiber aggregate.” In Proc., Structures Congress 2013: Bridging Your Passion with Your Profession, 340–351. Reston, VA: ASCE.
Li, G. Y., P. M. Wang, and X. Zhao. 2007a. “Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites.” Cem. Concr. Compos. 29 (5): 377–382. https://doi.org/10.1016/j.cemconcomp.2006.12.011.
Li, H., H. Xiao, J. Yuan, and J. Ou. 2004. “Microstructure of cement mortar with nano-particles.” Composites Part B 35 (2): 185–189. https://doi.org/10.1016/S1359-8368(03)00052-0.
Li, H., M. Zhang, and J. Ou. 2006. “Abrasion resistance of concrete containing nanoparticles for pavement.” Wear 260 (11–12): 1262–1266. https://doi.org/10.1016/j.wear.2005.08.006.
Li, H., M. Zhang, and J. Ou. 2007b. “Flexural fatigue performance of concrete containing nano-particles for pavement.” Int. J. Fatigue 29 (7): 1292–1301. https://doi.org/10.1016/j.ijfatigue.2006.10.004.
Li, V. C. 2002. “Large volume, high-performance applications of fibers in civil engineering.” J. Appl. Polym. Sci. 83 (3): 660–686. https://doi.org/10.1002/app.2263.
Liao, W. C., S. H. Chao, S. Y. Park, and A. E. Naaman. 2007. “Self-consolidating high-performance fiber reinforced concrete: SCHPFRC.” In Proc., 5th Int. RILEM Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC5). Bagneux, France: RILEM Publications.
Makar, J., J. Margeson, and J. Luh. 2005. “Carbon nanotube/cement composites–early results and potential applications.” In Proc., 3rd Int. Conf. on Construction Materials: Performance, Innovations and Structural Implications, 1–10. Vancouver, BC, Canada: National Research Council Canada.
Shah, S. P., and A. E. Naaman. 1976. “Mechanical properties of glass and steel fiber reinforced mortar.” J. Proc. 73 (1): 50–53.
Steinhart, J., and S. Hart. 1968. “Calibration curves for thermistors.” Deep Sea Res. Oceanogr. Abstr. 15 (4): 497–503. https://doi.org/10.1016/0011-7471(68)90057-0.
Yang, X., and D. D. L. Chung. 1992. “Latex-modified cement mortar reinforced by short carbon fibers.” Composites 23 (6): 453–460. https://doi.org/10.1016/0010-4361(92)90008-I.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 5, 2018
Accepted: Sep 13, 2019
Published online: Jan 13, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 13, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.