Dimensional Analysis of Pounding Response of an Oscillator Based on Modified Kelvin Pounding Model
Publication: Journal of Aerospace Engineering
Volume 32, Issue 4
Abstract
The pounding response between a single oscillator and a rigid barrier was investigated with dimensional analysis in which the modified Kelvin pounding analytical model was used to simulate the contact force. The dimensionless equation of motion of the single pounding oscillator was deduced. In particular, the structural response parameters of the pounding oscillator were characterized by a set of dimensionless terms which were denoted by the Buckingham notation. Therefore, the key parameters governing the impact reaction were reduced so that they could effectively express the pounding response law of the structures subjected to the earthquake excitation. Numerical analysis proved the superiority of the modified Kelvin model compared with the Kelvin model. The effect of pounding on the response of the single oscillator was illustrated in three well-separated spectral regions which were described by the dimensionless system frequency parameters. Parametric analysis showed that the contact stiffness mainly affects the penetration displacements. In addition, the pounding response is insensitive to the initial spacing, but is affected obviously by the coefficient of restitution in the first spectral region.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to the Science Foundation for Wuhan Institute of Technology (K201511), the National Nature Science Foundation of China (51408443), and the National R&D Program of China (2017YFC1500705).
References
Anagnostopoulos, S. A. 1995. “Earthquake induced pounding: State of the art.” In Vol. 2 of Proc., 10th European Conf. on Earthquake Engineering, edited by G. Duma, 897–905. Rotterdam, Netherlands: A.A. Balkema.
Anagnostopoulos, S. A. 1996. “Building pounding re-examined: How serious a problem is it?” In Proc., 11th European Conf. on Earthquake Engineering (CD-ROM). Amsterdam, Netherlands: Elsevier.
Bamer, F., J. Shi, and B. Markert. 2018. “Efficient solution of the multiple seismic pounding problem using hierarchical substructure techniques.” Comput. Mech. 62 (4): 761–782. https://doi.org/10.1007/s00466-017-1525-x.
Barenblatt, G. I. 1996. Scaling, self-similarity, and intermediate asymptotics. Cambridge, UK: Cambridge University Press.
Dimitrakopoulos, E., A. J. Kappos, and N. Makris. 2009a. “Dimensional analysis of yielding and pounding structures for records without distinct pulses.” Soil Dyn. Earthquake Eng. 29 (7): 1170–1180. https://doi.org/10.1016/j.soildyn.2009.02.006.
Dimitrakopoulos, E., N. Makris, and A. J. Kappos. 2009b. “Dimensional analysis of the earthquake-induced pounding between adjacent structures.” Earthquake Eng. Struct. Dyn. 38 (7): 867–886. https://doi.org/10.1002/eqe.872.
Dimitrakopoulos, E., N. Makris, and A. J. Kappos. 2010. “Dimensional analysis of the earthquake response of a pounding oscillator.” J. Eng. Mech. 3 (299): 299–310. https://doi.org/10.1061/(ASCE)0733-9399(2010)136.
Doǧangün, A. 2004. “Performance of reinforced concrete buildings during the May 1, 2003 Bingöl earthquake in Turkey.” Eng. Struct. 26 (6): 841–856. https://doi.org/10.1016/j.engstruct.2004.02.005.
Jankowski, R., K. Wilde, and Y. Fujino. 1998. “Pounding of super-structure segments in isolated elevated bridge during earthquakes.” Earthquake Eng. Struct. Dyn. 27 (5): 487–502. https://doi.org/10.1002/(SICI)1096-9845(199805)27:5%3C487::AID-EQE738%3E3.0.CO;2-M.
Jeng, V., and W. L. Tzeng. 2000. “Assessment of seismic pounding hazard for Taipei city.” Eng. Struct. 22 (5): 459–471. https://doi.org/10.1016/S0141-0296(98)00123-0.
Kasai, K., and B. F. Maison. 1997. “Building pounding damage during the 1989 Loma Prieta earthquake.” Eng. Struct. 19 (3): 195–207. https://doi.org/10.1016/S0141-0296(96)00082-X.
Lai, T., T. Yi, and H. Li. 2016. “Parametric study on sequential deconvolution for force identification.” J. Sound Vibr. 377: 76–89. https://doi.org/10.1016/j.jsv.2016.05.013.
Langhaar, H. L. 1951. Dimensional analysis and theory of models. New York: Wiley.
Li, H., T. Yi, M. Gu, and L. Huo. 2009. “Evaluation of earthquake-induced structural damages by wavelet transform.” Prog. Nat. Sci. 19 (4): 461–470. https://doi.org/10.1016/j.pnsc.2008.09.002.
Li, X., Z. Zhou, and H. Yu. 2008. “Strong motion observations and recordings from the great Wenchuan earthquake.” Earthquake Eng. Eng. Vibr. 7 (3): 235–246. https://doi.org/10.1007/s11803-008-0892-x.
Madani, B., F. Behnamfar, and R. H. Tajmir. 2015. “Dynamic response of structures subjected to pounding and structure-soil-structure interaction.” Soil Dyn. Earthquake Eng. 78: 46–60. https://doi.org/10.1016/j.soildyn.2015.07.002.
Makris, N., and C. J. Black. 2004a. “Dimensional analysis of bilinear oscillators under pulse-type excitations.” J. Eng. Mech. 130 (9): 1019–1031. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:9(1019).
Makris, N., and C. J. Black. 2004b. “Dimensional analysis of rigid-plastic and elastoplastic structures under pulse-type excitations.” J. Eng. Mech. 130 (9): 1006–1018. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:9(1006).
Mate, N. U., S. V. Bakre, and O. R. Jaiswal. 2017. “Seismic pounding response of singled-degree-of-freedom elastic and inelastic structures using passive tuned mass damper.” Int. J. Civ. Eng. 15 (7): 991–1005. https://doi.org/10.1007/s40999-017-0178-7.
Naeim, F., M. Lew, S. C. Huang, H. K. Lam, and L. D. Carpenter. 2000. “The performance of tall buildings during the 21 September 1999 Chi-Chi earthquake, Taiwan.” Struct. Des. Tall Build. 9 (2): 137–160. https://doi.org/10.1002/(SICI)1099-1794(200005)9:2%3C137::AID-TAL149%3E3.0.CO;2-D.
Press, W. H., B. P. Flannery, S. A. Teukolsky, and W. T. Vetterling. 1992. Numerical recipes: The art of scientific computing. New York: Cambridge University Press.
Rosenblueth, E., and R. Meli. 1986. “The 1985 earthquake: Causes and effects in Mexico City.” Concr. Int. 8 (5): 23–34.
Sezen, H., A. S. Whittaker, K. J. Elwood, and K. M. Mosalam. 2003. “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practice in Turkey.” Eng. Struct. 25 (1): 103–114. https://doi.org/10.1016/S0141-0296(02)00121-9.
Wang, Z. 2008. “A preliminary report on the great Wenchuan earthquake.” Earthquake Eng. Eng. Vibr. 7 (2): 225–234. https://doi.org/10.1007/s11803-008-0856-1.
Ye, K., L. Li, and H. Zhu. 2009. “A modified Kelvin impact model for pounding simulation of base-isolated building with adjacent structures.” Earthquake Eng. Eng. Vibr. 8 (3): 433–446. https://doi.org/10.1007/s11803-009-8045-4.
Yi, T., H. Li, and H. Sun. 2013. “Multi-stage structural damage diagnosis method based on ‘energy-damage’ theory.” Smart Struct. Syst. 12 (3–4): 345–361. https://doi.org/10.12989/sss.2013.12.3_4.345.
Zhai, C., S. Jiang, and Z. Chen. 2015. “Dimensional analysis of the pounding response of an oscillator considering contact duration.” J. Eng. Mech. 141 (4): 04014138. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000858.
Zhang, J., and Y. Tang. 2009. “Dimensional analysis of structures with translating and rocking foundations under near-fault ground motions.” Soil Dyn. Earthquake Eng. 29 (10): 1330–1346. https://doi.org/10.1016/j.soildyn.2009.04.002.
Zhao, B., F. Taucer, and T. Rossetto. 2009. “Field investigation on the performance of building structures during the 12 May 2008 Wenchuan earthquake in China.” Eng. Struct. 31 (8): 1707–1723. https://doi.org/10.1016/j.engstruct.2009.02.039.
Zhu, P., M. Abe, and Y. Fujino. 2002. “Modelling three-dimensional non-linear seismic performance of elevated bridges with emphasis on pounding of girders.” Earthquake Eng. Struct. Dyn. 31 (11): 1891–1913. https://doi.org/10.1002/eqe.194.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 17, 2018
Accepted: Dec 3, 2018
Published online: Apr 17, 2019
Published in print: Jul 1, 2019
Discussion open until: Sep 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.