Parametric Study of Pounding Tuned Mass Damper Based on Experiment of Vibration Control of a Traffic Signal Structure
Publication: Journal of Aerospace Engineering
Volume 31, Issue 6
Abstract
In the last few years, a new type of passive damper, the pounding tuned mass damper (PTMD), has been proposed and studied for passive structural vibration control. Experiments and numerical simulations verify the effectiveness of PTMDs. Studies have shown that PTMDs have a larger vibration dissipation capability and better robustness than traditional tuned mass dampers (TMDs). The design of a PTMD involves several parameters, and a numerical parametric study has been performed, but no experimental parametric study of a PTMD has been carried out. This paper experimentally studies the parameter sensitivity of the pounding tuned mass damper for a traffic signal structure. The control of free vibration and forced vibration at different harmonic frequencies are obtained to assess the sensitivity of the PTMD. This study considers four parameters: the viscoelastic (VE) material thickness, the gap between the delimiter and vibrating rod, the mass ratio, and the natural frequency of the PTMD. The parametric studies yield interesting findings that can guide future design of PTMDs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was financially supported by National Natural Science Foundation of China (Grant No. 51408504) and the Fundamental Research Funds for the Central Universities (Grant No. 2682014CX079).
References
Bapa, C. N., and S. Sankar. 1985. “Single unit impact damper in free and forced vibration.” J. Sound Vib. 99 (1): 85–94. https://doi.org/10.1016/0022-460X(85)90446-8.
Chen, J., G. Lu, Y. Li, T. Wang, W. Wang, and G. Song. 2017. “Experimental study on robustness of an eddy current-tuned mass damper.” Appl. Sci. 7 (9): 895. https://doi.org/10.3390/app7090895.
Collette, F. S. 1998. “A combined tuned absorber and pendulum impact damper under random excitation.” J. Sound Vib. 216 (2): 199–213. https://doi.org/10.1006/jsvi.1997.1666.
Courtney, W. A., and S. O. Oyadiji. 2001. “Preliminary investigations into the mechanical properties of a novel shock absorbing elastomeric composite.” J. Mater. Process. Tech. 119 (1–3): 379–386. https://doi.org/10.1016/S0924-0136(01)00977-3.
Dexter, R. J., and M. J. Ricker. 2002. Fatigue-resistant design of cantilevered signal, sign, and light supports. Washington, DC: National Cooperative Highway Research Program.
Ding, J., X. Chen, D. Zuo, and J. Hua. 2016. “Fatigue life assessment of traffic-signal support structures from an analytical approach and long-term vibration monitoring data.” J. Struct. Eng. 142 (6): 04016017. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001475.
Duncan, M. R., C. R. Wassgren, and C. M. Krousgrill. 2005. “The damping performance of a single particle impact damper.” J. Sound Vib. 286 (1–2): 123–144. https://doi.org/10.1016/j.jsv.2004.09.028.
Franchek, M. A., M. W. Ryan, and R. J. Bernhard. 1996. “Adaptive passive vibration control.” J. Sound Vib. 189 (5): 565–585. https://doi.org/10.1006/jsvi.1996.0037.
Gardonio, P., and S. J. Elliott. 2000. “Passive and active isolation of structural vibration transmission between two plates connected by a set of mounts.” J. Sound Vib. 237 (3): 483–511. https://doi.org/10.1006/jsvi.2000.3064.
Guyomar, D., and A. Badel. 2006. “Nonlinear semi-passive multimodal vibration damping: An efficient probabilistic approach.” J. Sound Vib. 294 (1): 249–268. https://doi.org/10.1016/j.jsv.2005.11.010.
Hamilton, H. R., G. S. Riggs, and J. A. Puckett. 2000. “Increased damping in cantilevered traffic signal structures.” J. Struct. Eng. 126 (4): 530–537. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(530).
Hrovat, D., P. Barak, and M. Rabins. 1983. “Semi-active versus passive or active tuned mass dampers for structural control.” J. Eng. Mech. 109 (3): 691–705. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:3(691).
Huang, G., H. Zheng, Y. L. Xu, and Y. Li. 2015. “Spectrum models for nonstationary extreme winds.” J. Struct. Eng. 141 (10): 04015010. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001257.
Jiang, J., P. Zhang, D. Patil, H. N. Li, and G. Song. 2017. “Experimental studies on the effectiveness and robustness of a pounding tuned mass damper for vibration suppression of a submerged cylindrical pipe.” Struct. Control Health Monit. 24 (3): e2027. https://doi.org/10.1002/stc.2027.
Kim, J., J. Ryu, and L. Chung. 2006. “Seismic performance of structures connected by viscoelastic dampers.” Eng. Struct. 28 (2): 183–195. https://doi.org/10.1016/j.engstruct.2005.05.014.
Klotzbach, P. J., and C. W. Landsea. 2015. “Extremely intense hurricanes: Revisiting Webster et al. (2005) after 10 years.” J. Climate 28 (19): 7621–7629. https://doi.org/10.1175/JCLI-D-15-0188.1.
Li, H., P. Zhang, G. Song, D. Patil, and Y. Mo. 2015a. “Robustness study of the pounding tuned mass damper for vibration control of subsea jumpers.” Smart Mater. Struct. 24 (9): 095001. https://doi.org/10.1088/0964-1726/24/9/095001.
Li, K., and A. P. Darby. 2006. “An experimental investigation into the use of a buffered impact damper.” J. Sound Vib. 291 (3): 844–860. https://doi.org/10.1016/j.jsv.2005.06.043.
Li, K., and A. P. Darby. 2009. “Modeling a buffered impact damper system using a spring-damper model of impact.” Struct. Control Health Monit. 16 (3): 287–302. https://doi.org/10.1002/stc.v16:3.
Li, L., G. Song, M. Singla, and Y. L. Mo. 2015b. “Vibration control of a traffic signal pole using a pounding tuned mass damper with viscoelastic materials (II): Experimental verification.” J. Vib. Control 21 (4): 670–675. https://doi.org/10.1177/1077546313488407.
Li, P., S. Liu, and Z. Lu. 2017. “Experimental study on the performance of polyurethane-steel sandwich structure under debris flow.” Appl. Sci. 7 (10): 1018. https://doi.org/10.3390/app7101018.
Lin, W., Y. Lin, G. Song, and J. Li. 2016. “Multiple pounding tuned mass damper (MPTMD) control on benchmark tower subjected to earthquake excitations.” Earthquake Struct. 11 (6): 1123–1141. https://doi.org/10.12989/eas.2016.11.6.1123.
Lin, W., G. Song, and S. Chen. 2017. “PTMD control on a benchmark TV tower under earthquake and wind load excitations.” Appl. Sci. 7 (4): 425. https://doi.org/10.3390/app7040425.
Lin, W. H., and A. K. Chopra. 2002. “Earthquake response of elastic SDF systems with non-linear fluid viscous dampers.” Earthquake Eng. Struct. Dyn. 31 (9): 1623–1642. https://doi.org/10.1002/(ISSN)1096-9845.
Lu, Z., X. Lu, W. Lu, and S. F. Masri. 2012a. “Experimental studies of the effects of buffered particle dampers attached to a multi-degree-of-freedom system under dynamic loads.” J. Sound Vib. 331 (9): 2007–2022. https://doi.org/10.1016/j.jsv.2011.12.022.
Lu, Z., X. Lu, W. Lu, and S. F. Masri. 2012b. “Shaking table test of the effects of multi-unit particle dampers attached to an MDOF system under earthquake excitation.” Earthquake Eng. Struct. Dyn. 41 (5): 987–1000. https://doi.org/10.1002/eqe.v41.5.
Lu, Z., X. Lu, and S. F. Masri. 2010. “Studies of the performance of particle dampers under dynamic loads.” J. Sound Vib. 329 (26): 5415–5433. https://doi.org/10.1016/j.jsv.2010.06.027.
Masri, S. F., and T. K. Caughey. 1966. “On the stability of the impact damper.” J. Appl. Mech. 33 (3): 586–592. https://doi.org/10.1115/1.3625125.
McManus, P. S., H. R. Hamilton, and J. A. Pucket. 2003. “Damping in cantilevered traffic signal structures under forced vibration.” J. Struct. Eng. 129 (3): 373–382. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(373).
Paget, A. L. 1937. “Vibration in steam turbine buckets and damping by impacts.” Engineering 143: 305–307.
Park, J. H., J. Kim, and K. W. Min. 2004. “Optimal design of added viscoelastic dampers and supporting braces.” Earthquake Eng. Struct. Dyn. 33 (4): 465–484. https://doi.org/10.1002/(ISSN)1096-9845.
Peng, L., G. Huang, X. Chen, and Q. Yang. 2018. “Evolutionary spectra-based time-varying coherence function and application in structural response analysis to downburst winds.” J. Struct. Eng. 144 (7): 04018078. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002066.
Rana, R., and T. T. Soong. 1998. “Parametric study and simplified design of tuned mass dampers.” Eng. Struct. 20 (3): 193–204. https://doi.org/10.1016/S0141-0296(97)00078-3.
Rohman, M. A. 1994. “Design of tuned mass dampers for suppression of galloping in tall prismatic structures.” J. Sound Vib. 171 (3): 289–299. https://doi.org/10.1006/jsvi.1994.1121.
Semercigil, S. E., D. Lammers, and Z. Ying. 1992. “New tuned vibration absorber for wide-band excitations.” J. Sound Vib. 156 (3): 445–459. https://doi.org/10.1016/0022-460X(92)90738-J.
Song, G., S. Cai, and L. Hong-Nan. 2017. “Energy dissipation and vibration control: Modeling, algorithm, and devices.” Appl. Sci. 7 (8): 801. https://doi.org/10.3390/app7080801.
Song, G., P. Zhang, L. Y. Li, M. Singla, D. Patil, H. N. Li, and Y. L. Mo. 2016. “Vibration control of a pipeline structure using pounding tuned mass damper.” J. Eng. Mech. 142 (6): 04016031. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001078.
Thomas, M. D., W. A. Knight, and M. M. Sadek. 1975. “The impact damper as a method of improving cantilever boring bars.” J Eng. Ind. 97 (3): 859–866. https://doi.org/10.1115/1.3438693.
Tian, L., K. Rong, P. Zhang, and Y. Liu. 2017. “Vibration control of a power transmission tower with pounding tuned mass damper under multi-component seismic excitations.” Appl. Sci. 7 (5): 477. https://doi.org/10.3390/app7050477.
Wang, W., D. Dalton, X. Hua, X. Wang, Z. Chen, and G. Song. 2017a. “Experimental study on vibration control of a submerged pipeline model by eddy current tuned mass damper.” Appl. Sci. 7 (10): 987. https://doi.org/10.3390/app7100987.
Wang, W., X. Hua, X. Wang, Z. Chen, and G. Song. 2017b. “Advanced impact force model for low-speed pounding between viscoelastic materials and steel.” J. Eng. Mech. 143 (12): 04017139. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001372.
Wang, W., X. Hua, X. Wang, Z. Chen, and G. Song. 2017c. “Numerical modeling and experimental study on a novel pounding tuned mass damper.” J. Vib. Control. 1–14. https://doi.org/10.1177/1077546317718714.
Wang, W., X. Hua, X. Wang, Z. Chen, and G. Song. 2017d. “Optimum design of a novel pounding tuned mass damper under harmonic excitation.” Smart Mater. Struct. 26 (5): 055024. https://doi.org/10.1088/1361-665X/aa69a3.
Weber, F., H. Distl, S. Fischer, and C. Braun. 2016. “MR damper controlled vibration absorber for enhanced mitigation of harmonic vibrations.” Appl. Sci. 5 (4): 27. https://doi.org/10.3390/act5040027.
Ying, Z., and S. E. Semercigil. 1991. “Response of a new tuned vibration absorber to an earthquake-like random excitation.” J. Sound Vib. 150 (3): 520–530. https://doi.org/10.1016/0022-460X(91)90904-X.
Zhang, P., L. Li, D. Patil, M. Singla, H. N. Li, Y. L. Mo, and G. Song. 2016. “Parametric study of pounding tuned mass damper for subsea jumpers.” Smart Mater. Struct. 25 (1): 015028. https://doi.org/10.1088/0964-1726/25/1/015028.
Zhang, P., G. Song, H. N. Li, and Y. X. Lin. 2013. “Seismic control of power transmission tower using pounding TMD.” J. Eng. Mech. 139 (10): 1395–1406. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000576.
Zhao, D., and A. S. Morgans. 2009. “Tuned passive control of combustion instabilities using multiple Helmholtz resonators.” J. Sound Vib. 320 (4): 744–757. https://doi.org/10.1016/j.jsv.2008.09.006.
Zhou, Y., and H. Li. 2014. “Analysis of a high-rise steel structure with viscous damped outriggers.” Struct. Des. Tall Special Build. 23 (13): 963–979. https://doi.org/10.1002/tal.v23.13.
Zhou, Y., X. Lu, D. Weng, and R. Zhang. 2012. “A practical design method for reinforced concrete structures with viscous dampers.” Eng. Struct. 39: 187–198. https://doi.org/10.1016/j.engstruct.2012.02.014.
Zuo, D., and C. W. Letchford. 2010. “Wind-induced vibration of a traffic-signal-support structure with cantilevered tapered circular mast arm.” Eng. Struct. 32 (10): 3171–3179. https://doi.org/10.1016/j.engstruct.2010.06.005.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Mar 9, 2018
Accepted: May 30, 2018
Published online: Aug 31, 2018
Published in print: Nov 1, 2018
Discussion open until: Jan 31, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.