Containment Ability of Kevlar 49 Composite Case under Spinning Impact
Publication: Journal of Aerospace Engineering
Volume 31, Issue 2
Abstract
The Kevlar 49 composite material (DuPont, Wilmington, Delaware), which is of light weight and high strength, is used increasingly as a containment structure for fan blades. This paper proposes a spinning impact testing method to investigate the containment ability of Kevlar 49 composite case after fan-blade-out (FBO) events. Three spinning impact tests are conducted to closely simulate actual FBO events by considering the impact angle and blade rotating factors. These tests show three distinct results: contained, critical contained, and uncontained. The computational model is developed and correlated with the experiments. It shows that eight layers of Kevlar fabric can succeed in catching a released blade with 4,000 J energy under spinning status, of which 3,083 J is absorbed by the Kevlar fabric. A comparison with the data published in the Federal Aviation Administration reports indicates that Kevlar 49 composites have greater containment potential under a spinning impact. A different containment mechanism is found in which a bulge is formed in the radial direction of the fabric, flowing along the circumference together with the rotating blade when the contact zone is expanded. This mechanism should be considered when applying woven fabric to an aero-engine containment system.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2015). “Standard test method for breaking force and elongation of textile fabrics (strip method).” ASTM D5035-15, West Conshohocken, PA.
ASTM. (2017). “Standard test methods and definitions for mechanical testing of steel products.” ASTM A370-17, West Conshohocken, PA.
Bandaru, K. A., Chavan, V. V., Ahmad, S., Alagirusamy, R., and Bhatnagar, N. (2016). “Ballistic impact response of Kevlar reinforced thermoplastic composite armors.” Int. J. Impact Eng., 89, 1–13.
Buyuk, M., Kan, S., and Loikkanen, M. J. (2009). “Explicit finite-element analysis of 2024-T3/T351 aluminum material under impact loading for airplane engine containment and fragment shielding.” J. Aerosp. Eng., 287–295.
CAAC (Civil Aviation Administration of China). (2005). “Airworthiness standards: Aircraft engines.” CCAR-33, Beijing (in Chinese).
Carney, K. S., Pereira, M., and Revilock, D. (2009). “Jet engine fan blade containment using an alternate geometry.” Int. J. Impact Eng., 36(5), 720–728.
Colakoglu, M., Soykasap, O., and Özek, T. (2007). “Experimental and numerical investigations on the ballistic performance of polymer matrix composites used in armor design.” Appl. Compos. Mater., 14(1), 47–58.
FAA (Federal Aviation Administration). (1984). Federal aviation regulations. Part 33—Airworthiness standards: Aircraft engines, Section 33.94-blade containment and rotor unbalance tests, Washington, DC.
Gellert, E. P., Cimpoeru, S. J., and Woodward, R. L. (2000). “A study of the effect of target thickness on the ballistic perforation of glass-fibre-reinforced plastic composites.” Int. J. Impact Eng., 24(5), 445–456.
Gerstle, J. H. (1975). “Analysis of rotor fragment impact on ballistic fabric engine burst containment shields.” J. Aircraft, 12(4), 388–393.
Johnson, G. R., and Cook, W. H. (1983). “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures.” Proc., 7th Int. Symp. on Ballistics, The Hague, Amsterdam, Netherlands.
Johnson, G. R., and Cook, W. H. (1985). “Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures.” Eng. Fract. Mech., 21(1), 31–48.
Liu, L., Xuan, H., and He, Z. (2016). “Containment capability of 2D triaxial braided tape wound composite casing for aero-engine.” Polym. Compos., 37(7), 2227–2242.
LS-DYNA [Computer software]. Livermore Software Technology Corporation, Livermore, CA.
LSTC (Livermore Software Technology Corporation). (2017). “LS-DYNA keyword user′s manual. Volume 2: Material models. LS-DYNA R10.0.” LSTC, Livermore, CA.
Naik, D., Sankaran, S., and Mobasher, B. (2009). “Development of reliable modeling methodologies for fan blade out containment analysis. I: Experimental studies.” Int. J. Impact Eng., 36(1), 1–11.
Pepin, J. (1999). “Fiber-reinforced structures for turbine engine rotor fragment containment.”, Federal Aviation Administration, Washington, DC.
Pereira, J. M., and Revilock, D. M. (2004). “Explicit finite element modeling of multilayer composite fabric for gas turbine engine containment system. II: Ballistic impact testing.”, Federal Aviation Administration, Washington, DC.
Rajan, S. D., Mobasher, B., and Stahlecker, Z. (2011). “Explicit finite element modeling of multilayer composite fabric for gas turbine engine containment system. III: Fabric material tests.”, Federal Aviation Administration, Washington, DC.
Rajan, S. D., Mobasher, B., Vaidya, A., Zhu, D., Fein, J., and Deivanayagam, A. (2014). “Explicit finite element modeling of multilayer composite fabric for gas turbine engine containment systems, Phase IV.”, Federal Aviation Administration, Washington, DC.
Simmons, J., and Shockey, D. (2010). “Explicit finite element modeling of multilayer composite fabric for gas turbine engine containment systems, Phase II. III: Material model development and simulation experiments.”, Federal Aviation Administration, Washington, DC.
Sorrentino, L., Bellini, C., Corrado, A., Polini, W., and Aricò, R. (2014). “Ballistic performance evaluation of composite laminates in Kevlar 29.” Procedia Eng., 88, 255–262.
Ulven, C., Vaidya, U. K., and Hosur, M. V. (2003). “Effect of projectile shape during ballistic perforation of VARTM carbon/epoxy composite panels.” Compos. Struct., 61(1–2), 143–150.
Wu, E., and Chang, L. (1995). “Woven glass/epoxy laminates subjected to projectile impact.” Int. J. Impact Eng., 16(4), 607–619.
Ying, H., Xiaohui, L., and Yuzhong, L. (2002). “On improving bulletproof properties of Kevlar wove-fabric reinforced laminated plate.” J. Northwestern Polytechnical Univ., 20(3), 486–491 (in Chinese).
Zhu, D., Vaidya, A., and Mobasher, B. (2014). “Finite element modeling of ballistic impact on multi-layer Kevlar 49 fabrics.” Compos. Part B. Eng., 56, 254–262.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 28, 2017
Accepted: Jul 24, 2017
Published online: Dec 9, 2017
Published in print: Mar 1, 2018
Discussion open until: May 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.