Influence of Passive Design Parameters on Thermal Comfort of an Office Space in a Building in Delhi
Publication: Journal of Architectural Engineering
Volume 26, Issue 3
Abstract
Energy efficiency measures in buildings, along with maintaining indoor thermal comfort, are increasingly drawing attention. The most widely accepted indices, Predicted Mean Vote (PMV) and Percentage People Dissatisfied (PPD), have been used in this study for evaluating thermal comfort of a small office room in Delhi. Various parameters influencing thermal comfort have been measured for two months and the observations have been used for assessing the PMV and PPD, which have then been compared with the simulation results from IDA ICE 4.7 Beta software, and found to be in agreement. Moreover, a comparison of the PMV values has been done with other indices such as Tropical Summer Index (TSI) and Corrected Effective Temperature (CET). Parametric study for the office room has also been performed to predict the shifts in the comfort levels by changing types and thicknesses of wall as well as roof insulations, provision of blinds, and types of window glazing, using which, the best possible solution to enhance the thermal environment of the office room has been proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are thankful to Global Evolutionary Energy Design (GEED), New Delhi, India, where the experimental work for the study was conducted. The authors are also thankful to Yardi Software Pvt. Ltd. for providing the funding and IIT Delhi for providing necessary facilities and support for this research.
Notation
The following symbols are used in this paper:
- ADu
- dubois area (m2);
- CET
- corrected effective temperature (°C);
- Cres
- heat exchange by convection in breathing (W/m2);
- Ec
- heat exchange by evaporation on skin (W/m2);
- Eres
- evaporative heat exchange in breathing (W/m2);
- e
- root mean square percentage deviation;
- fcl
- clothing surface area factor;
- H
- sensitive heat losses (W/m2);
- Ht.
- height of a person (cm);
- hc
- convective heat transfer coefficient (W/m2 K);
- Icl
- clothing insulation (m2 K/W);
- L
- thermal load on the body of an occupant (W/m2);
- M
- metabolic rate (W/m2);
- N
- number of readings;
- PMV
- predicted mean vote;
- PMVTSI
- TSI values in terms of PMV;
- PMVCET
- CET values in terms of PMV;
- PPD
- percentage people dissatisfied;
- pa
- water vapor partial pressure (kPa);
- ps
- partial vapor pressure of saturated air (kPa);
- RH
- relative humidity;
- TSI
- tropical summer index (°C);
- ta
- air temperature (°C);
- tcl
- surface temperature of clothing (°C);
- tg
- globe temperature (°C);
- tr
- mean radiant temperature (°C);
- tsk
- external skin temperature (°C);
- tW
- wet bulb temperature (°C);
- va
- velocity of air (m/s);
- var
- relative velocity of air (m/s);
- W
- effective mechanical power (W/m2);
- Wt.
- weight of a person (kg);
- Xi
- values of parameters obtained through simulations; and
- Yi
- values of parameters obtained analytically.
References
Aryal, P., and T. Leephakpreeda. 2016. “Effects of partition on thermal comfort, indoor air quality, energy consumption, and perception in air-conditioned buildings.” J. Sol. Energy Eng. 138 (5): 051005. https://doi.org/10.1115/1.4034072.
ASHRAE (American Society of Heating, Refrigerating and Air-conditioning Engineers). 2010. Thermal environmental conditions for human occupancy. ANSI/ASHRAE 55-2010. Atlanta, GA: ASHRAE.
Auliciems, A., and S. V. Szokolay. 2007. Passive and low energy architecture international: Design tools and techniques—Note 3. Brisbane, Australia: Dept. of Architecture, Univ. of Queensland.
Azad, A. S., et al. 2018. “Evaluation of thermal comfort criteria of an active chilled beam system in tropical climate: A comparative study.” Build. Environ. 145: 196–212. https://doi.org/10.1016/j.buildenv.2018.09.025.
Berkovic, S., A. Yezioro, and A. Bitan. 2012. “Study of thermal comfort in courtyards in a hot arid climate.” Sol. Energy 86 (5): 1173–1186. https://doi.org/10.1016/j.solener.2012.01.010.
BIS (Bureau of Indian Standards). 1987. Handbook on functional requirements of a building (other than industrial buildings) (Parts 1–4). SP 41. New Delhi: BIS.
Calis, G., and M. Kuru. 2017. “Assessing user thermal sensation in the Aegean region against standards.” Sustainable Cities Soc. 29: 77–85. https://doi.org/10.1016/j.scs.2016.11.013.
CSE (Centre for Science and Environment). 2014. 02 energy and buildings. New Delhi: CSE.
Daghigh, R., N. M. Adam, and B. B. Sahari. 2009. “Thermal comfort of an air-conditioned office through different windows-door opening arrangements.” Build. Serv. Eng. Res. Technol. 30 (1): 49–63. https://doi.org/10.1177/0143624408099448.
EQUA. 2013. User Manual, IDA Indoor Climate and Energy, Version 4.6. Solna, Sweden: EQUA simulation AB.
Forgiarini Rupp, R., and E. Ghisi. 2017. “Predicting thermal comfort in office buildings in a Brazilian temperate and humid climate.” Energy Build. 144: 152–166. https://doi.org/10.1016/j.enbuild.2017.03.039.
Greenspec. 2016. “Insulation materials and their thermal properties.” Accessed February 9, 2017. http://www.greenspec.co.uk/building-design/insulation-materials-thermal-properties/.
Haase, M., and A. Amato. 2009. “An investigation of the potential for natural ventilation and building orientation to achieve thermal comfort in warm and humid climates.” Sol. Energy 86 (3): 389–399. https://doi.org/10.1016/j.solener.2008.08.015.
Humphreys, M. A., and J. Fergus Nicol. 2002. “The validity of ISO-PMV for predicting comfort votes in every-day thermal environments.” Energy Build. 34 (6): 667–684. https://doi.org/10.1016/S0378-7788(02)00018-X.
Hwang, R.-L., T.-P. Lin, M.-J. Cheng, and J.-H. Lo. 2010. “Adaptive comfort model for tree-shaded outdoors in Taiwan.” Build. Environ. 48 (8): 1873–1879. https://doi.org/10.1016/j.buildenv.2010.02.021.
ISO (International Organization for Standardization). 2005. Ergonomics of the thermal environment—analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. Switzerland: ISO.
Katafygiotou, M. C., and D. K. Serghides. 2014. “Thermal comfort of a typical secondary school building in Cyprus.” Sustainable Cities Soc. 13: 303–312. https://doi.org/10.1016/j.scs.2014.03.004.
Kwok, A. G., and C. Chun. 2003. “Thermal comfort in Japanese schools.” Sol. Energy 74 (3): 245–252. https://doi.org/10.1016/S0038-092X(03)00147-6.
Liu, S., C. Huang, Y. Liu, J. Shen, and Z. Li. 2018. “Retrofitting traditional western hunan dwellings with passive strategies based on indoor thermal environment.” J. Archit. Eng. 24 (3): 04018017. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000316.
Nematchoua, M. K., P. Ricciardi, S. Reiter, S. Asadi, and C. M. H. Demers. 2017. “Thermal comfort and comparison of some parameters coming from hospitals and shopping centers under natural ventilation: The case of Madagascar Island.” J. Build. Eng. 13: 196–206. https://doi.org/10.1016/j.jobe.2017.07.014.
Ole Fanger, P., and J. Tøftum. 2002. “Extension of the PMV model to non-air-conditioned buildings in warm climates.” Energy Build. 34 (6): 533–536. https://doi.org/10.1016/S0378-7788(02)00003-8.
Orosa, J. A., and A. C. Oliveira. 2011. “A new thermal comfort approach comparing adaptive and PMV models.” Renewable Energy 36 (3): 951–956. https://doi.org/10.1016/j.renene.2010.09.013.
Pazhoohesh, M., and C. Zhang. 2018. “Investigating occupancy-driven air-conditioning control based on thermal comfort level.” J. Archit. Eng. 24 (2): 04018003. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000295.
Pourshaghaghy, A., and M. Omidvari. 2012. “Examination of thermal comfort in a hospital using PMV–PPD model.” Appl. Ergonomics 43 (6): 1089–1095. https://doi.org/10.1016/j.apergo.2012.03.010.
Ravikumar, P., and D. Prakash. 2009. “Analysis of thermal comfort in an office room by varying the dimensions of the windows on adjacent walls using CFD: A case study based on numerical simulation.” Build. Simul. 2 (3): 187–196. https://doi.org/10.1007/s12273-009-9317-7.
Saxena, R., K. Biplab, and D. Rakshit. 2018. “Quantitative assessment of phase change material utilization for building cooling load abatement in composite climatic condition.” J. Sol. Energy Eng. 140 (1): 011001. https://doi.org/10.1115/1.4038047.
Sharma, L., S. F. Ali, and D. Rakshit. 2018. “Performance evaluation of a top lighting light-pipe in buildings and estimating energy saving potential.” Energy Build. 179: 57–72. https://doi.org/10.1016/j.enbuild.2018.09.022.
Sharma, M. R., and S. Ali. 1978. “Evaluation of thermal stress—tropical summer index.” Build. Dig. 127: 1–5.
Singh, M. K., S. Mahapatra, and J. Teller. 2015. “Development of thermal comfort models for various climatic zones of North-East India.” Sustainable Cities Soc. 14: 133–145. https://doi.org/10.1016/j.scs.2014.08.011.
Stamou, A. I., I. Katsiris, and A. Schaelin. 2007. “Evaluation of thermal comfort in indoor stadiums of the Athens 2004 olympic games with CFD models: Case of nikea indoor stadium.” J. Archit. Eng. 13 (3): 130–135. https://doi.org/10.1061/(ASCE)1076-0431(2007)13:3(130).
Vitro Architectural Glass. 2015. “How Low-e Glass Works.” Accessed February 15, 2017. http://glassed.vitroglazings.com/topics/how-low-e-glass-works.
WINDOWS. 2016. “Windows for High-performance Commercial Buildings.” Accessed January 29, 2017. https://www.commercialwindows.org/tints.php.
Yau, Y., and B. Chew. 2014. “A review on predicted mean vote and adaptive thermal comfort models.” Build. Serv. Eng. Res. Technol. 35 (1): 23–35. https://doi.org/10.1177/0143624412465200.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 23, 2019
Accepted: Nov 26, 2019
Published online: Apr 22, 2020
Published in print: Sep 1, 2020
Discussion open until: Sep 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.