Ultimate Bearing Capacity of Two Interfering Rough Strip Footings
Publication: International Journal of Geomechanics
Volume 7, Issue 1
Abstract
The ultimate bearing capacity of two interfering strip footings was determined by using the method of stress characteristics. The analysis was performed by choosing two different possible failure mechanisms. The variation of the efficiency factor was computed with respect to change in the clear spacing between the two footings. For a given , the value of predicted on the basis of Mechanism 1 was always found to be smaller than those on the basis of Mechanism 2. For Mechanism 1, the maximum value of , which becomes always equal to 2.0, always occurs at . On the other hand, the Mechanism 2 provides maximum value of even greater than 2.0, especially with , corresponding to . It was noted that the results from Mechanism 2 compare more closely with the theory of Stuart in 1962 and with the recent upper bound limit analysis solution of the writers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bolton, M. D., and Lau, C. K. (1993). “Vertical bearing capacity factors for circular and strip footings on Mohr-Coulomb soil.” Can. Geotech. J., 30, 1024–1033.
Chen, W. F., and Liu, X. L. (1990). Limit analysis in soil mechanics, Elsevier, Amsterdam, The Netherlands.
Cox, A. D., Eason, G., and Hopkins, H. G. (1961). “Axially symmetric plastic deformations in soils.” Proc. R. Soc. London, Ser. A, 254, 1–45.
Das, B. M., and Larbi-Cherif, S. (1983). “Bearing capacity of two closely spaced shallow foundations on sand.” Soils Found., 23(1), 1–7.
Frydman, S., and Burd, H. J. (1997). “Numerical studies of bearing-capacity factor .” J. Geotech. Geoenviron. Eng., 123(1), 20–29.
Graham, J., Raymond, G. P., and Suppiah, A. (1984). “Bearing capacity of three closely spaced footings on sand.” Geotechnique, 34(2), 173–182.
Griffiths, D. V. (1982). “Computations of bearing capacity factors using finite elements.” Geotechnique, 32(3), 195–202.
Kumar, J. (2003). “ for rough strip footing using the method of characteristics.” Can. Geotech. J., 40(3), 669–674.
Kumar, J. (2004). “Effect of footing-soil interface friction on bearing capacity factor .” Geotechnique, 54(10), 677–680.
Kumar, J., and Mohan Rao, V. B. K. (2002). “Seismic bearing capacity factors for spread foundations.” Geotechnique, 52(2), 79–88.
Kumar, J., and Mohan Rao, V. B. K. (2003). “Seismic bearing capacity of foundations on slopes.” Geotechnique, 53(3), 347–361.
Kumar, A., and Saran, S. (2003). “Closely spaced footings on geogrid-reinforced sand.” J. Geotech. Geoenviron. Eng., 129(7), 660–664.
Lundgren, H., and Mortensen, K. (1953). “Determination by the theory of plasticity on the bearing capacity of continuous footings on sand.” Proc., 3rd Int. Conf. on Soil Mechanics and Foundations Engineering, Zürich, Switzerland, Vol. 1, 409–412.
Martin, C. M. (2003). “New software for rigorous bearing capacity calculations.” Proc., Int. Symp. on Foundations: Innovations, Observations, Design, and Practice, Dundee, 581–592.
Martin, C. M. (2005). “Exact bearing capacity calculations using the method of characteristics.” Int. Conf. on Analytical and Computational Methods in Geomechanics (IACMAG), Torino, Italy.
Saran, S., and Agarwal, V. C. (1974). “Interference of surface footings on sand.” Indian Geotechnical J., 4(2), 129–139.
Sokolovski, V. V. (1960). Statics of soil media, Butterworths, London.
Stuart, J. G. (1962). “Interference between foundations, with special reference to surface footings in sand.” Geotechnique, 12(1), 15–22.
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Ukritchon, B., Whittle, A. J., and Klangvijit, C. (2003). “Calculations of bearing capacity factor using numerical limit analysis.” J. Geotech. Geoenviron. Eng., 129(5), 468–474.
West, J. M., and Stuart, J. G. (1965). “Oblique loading resulting from interference between surface footings on sand.” Proc., 6th Int. Conf. Soil Mech., Montréal, Vol. 2, 214–217.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 4, 2005
Accepted: Dec 8, 2005
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.