Influence of Nonassociativity on Localization and Failure in Geomechanics Based on Gradient Elastoplasticity
Publication: International Journal of Geomechanics
Volume 7, Issue 1
Abstract
We present results of a parametric study on shearband formation in geomaterials, examining the influence of material dilatancy on shearband properties. The study is based on a new higher order continuum theory, called gradient elastoplasticity, developed to model localization of deformation. We present results for two problems with different initial stress fields: The biaxial test and the hollow cylinder test. We show that nonassociativity promotes bifurcation at lower deformation, leading to localized deformation and more abrupt final failure. Both the inclination and thickness of the calculated shearbands decrease with increasing nonassociativity. Gradient elastoplasticity is capable of reproducing the experimentally observed localized failure modes, including details such as reorientation of shearband close to a free boundary.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge support from Schlumberger Cambridge Research, and also the European Commission through Program 3F-Corinth, No. ENK6-2000-0056.
References
Aifantis, E. (1984). “On the microstructural origin of certain inelastic models.” J. Eng. Mater. Technol., 106(4), 326–330.
Alsiny, A., Vardoulakis, I., and Drescher, A. (1992). “Deformation localization in cavity inflation experiments on dry sand.” Geotechnique, 42(3), 395–410.
Arthur, J. R. F., Dunstan, T., Al-Ani, Q. A. J., and Assadi, A. (1977). “Plastic deformation and failure in granular media.” Geotechnique, 27(1), 53–74.
Benallal, A., Bilardon, R., and Geymonat, G. (1989). “Conditions de bifurcation à l’intérieur et aux frontières pour une classe de matériaux non standards.” C. R. Acad. Sci., Ser. II: Mec., Phys., Chim., Sci. Terre Univers, 308, 893–898 (in French).
Besuelle, P., Desrues, J., and Raynaud, S. (2000). “Experimental characterisation of the localization phenomenon inside a vosges sandstone in a triaxial cell.” Int. J. Rock Mech. Min. Sci., 37(8), 1223–1237.
Dasgupta, S., and Sengupta, D. (1990). “A higher-order triangular plate bending element revisited.” Int. J. Numer. Methods Eng., 30(3), 419–430.
de Borst, R., and Mühlhaus, H.-B. (1992). “Gradient-dependent plasticity: Formulation and algorithmic aspects.” Int. J. Numer. Methods Eng., 35(3), 521–539.
Durban, D., and Papanastasiou, P. (1997). “Elastoplastic response of pressure sensitive solids.” Int. J. Numer. Analyt. Meth. Geomech., 21, 423–441.
Finno, R. J., Harris, W. W., Mooney, M. A., and Viggiani, G. (1997). “Shearbands in plane strain compression of loose sand.” Geotechnique, 47(1), 149–165.
Leroy, Y., and Ortiz, M. (1989). “Finite element analysis of strain localization in frictional materials.” Int. J. Numer. Analyt. Meth. Geomech., 13(1), 53–74.
Mindlin, R. D. (1964). “Microstructure in linear elasticity.” Arch. Ration. Mech. Anal., 16(1), 51–78.
Molenkamp, F. (1985). “Comparison of frictional material models with respect to shearband initiation.” Geotechnique, 35(2), 127–143.
Mühlhaus, H.-B., and Vardoulakis, I. (1987). “The thickness of shearbands in granular materials.” Geotechnique, 37(3), 271–283.
Ord, A., Vardoulakis, I., and Kajewski, R. (1991). “Shearband formation in gosford sandstone.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 28(5), 397–409.
Ortiz, M., Leroy, Y., and Needleman, A. (1987). “A finite element method for localized failure analysis.” Comput. Methods Appl. Mech. Eng., 61(2), 189–214.
Papanastasiou, P., and Vardoulakis, I. (1992). “Numerical treatment of progressive localization in relation to borehole stability.” Int. J. Numer. Analyt. Meth. Geomech., 16(6), 389–424.
Rice, J. R. (1976). “The localization of plastic deformation.” Theoretical and applied mechanics, W. T. Koiter, ed., North-Holland, Amsterdam, The Netherlands, 207.
Rudnicki, J. W., and Rice, J. R. (1975). “Conditions for the localization of deformation in pressure-sensitive dilatant materials.” J. Mech. Phys. Solids, 23(6), 371–394.
Shu, J. Y., and Fleck, N. A. (1998). “The prediction of a size effect in microindentation.” Int. J. Solids Struct., 35(13), 1363–1383.
Vardoulakis, I. (1976). “Equilibrium theory of shearbands in plastic bodies.” Mech. Res. Commun., 3(3), 209–214.
Vardoulakis, I. (1980). “Shearband inclination and shear modulus of sand in biaxial tests.” Int. J. Numer. Analyt. Meth. Geomech., 4(2), 103–119.
Vardoulakis, I. (1981). “Bifurcation analysis of the plane rectilinear deformation on dry sand samples.” Int. J. Solids Struct., 17(11), 1085–1101.
Vardoulakis, I. (1989). “Shearbanding and liquefaction in granular materials on the basis of a cosserat continuum theory.” Ing.-Arch., 59(2), 106–113.
Vardoulakis, I., and Aifantis, E. C. (1991). “A gradient flow theory of plasticity for granular materials.” Acta Mech., 87(3–4), 197–217.
Vardoulakis, I., and Sulem, J. (1995). Bifurcation analysis in geomechanics, Blackie Academic, London.
Zervos, A., Papanastasiou, P., and Vardoulakis, I. (2001a). “A finite element displacement formulation for gradient elastoplasticity.” Int. J. Numer. Methods Eng., 50(6), 1369–1388.
Zervos, A., Papanastasiou, P., and Vardoulakis, I. (2001b). “Modelling of localization and scale effect in thick-walled cylinders with gradient elastoplasticity.” Int. J. Solids Struct., 38(30–31), 5081–5095.
Zervos, A., Papanastasiou, P., and Vardoulakis, I. (2002). “Shear localization in thick-walled cylinders under internal pressure based on gradient elastoplasticity.” IUTAM Symp. on Analytical and Computational Fracture Mechanics of Non-homogeneous Materials, B. Karihaloo, ed., Cardiff, U.K.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 9, 2005
Accepted: Feb 14, 2006
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.