Effectiveness of GFRP Sheets for Shear Strengthening of Timber
Publication: Journal of Composites for Construction
Volume 10, Issue 6
Abstract
The objective of this study was to develop a cost-effective shear-strengthening technique for timber stringers that is environmentally friendly and leads to a durable structure. Testing was performed on creosote-treated Douglas fir beams, with dimensions of , removed from a 40 year old bridge. Two strengthening schemes were investigated; incorporating vertical and diagonal glass fiber-reinforced polymer (GFRP) sheets applied to both shear spans. The diagonal scheme proved effective in increasing the average ultimate load, flexural stiffness, and deformability of the beams. Performance of the members reinforced using the vertical scheme, however, was poor compared to diagonally reinforced beams. The contribution of the diagonal sheets to the shear capacity of the stringers was around 12% at service loads and 40% at ultimate load. In conclusion, this study has shown that diagonal GFRP sheets are more effective than vertical sheets in shear-strengthening timber stringers with horizontal splits at their ends.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the support of the Bridges and Structures Branch of Manitoba Transportation and Government Services, ISIS Canada, Vector Construction Group, and the Faculty of Architecture for the use of their facilities, and lab technicians from the W. R. McQuade Laboratory.
References
Abdel-Magid, B., Dagher, H. J., and Kimball, T. (1994). “Effect of composite reinforcement on structural wood.” Proc., Materials Engineering Conf., ASCE, San Diego, 417–424.
ASTM. (1999). “Standard test methods of static tests of lumber in structural sizes.” D198-99, Philadelphia.
Canadian Standards Association (CSA). (2000). “Canadian highway bridge design code.” CAN/CSA-S6-00, CSA International, Toronto.
Dagher, H. J., and Lindyberg, R. (2000). “Strengthening of wood beams using FRP composites.” Proc., Composites Fabricators Association Conf., Las Vegas.
Gentile, C., Svecova, D., and Rizkalla, S. H. (2002). “Timber beams strengthened with GFRP bars: Development and application.” J. Compos. Constr., 6(1), 11–20.
Hay, S. W. (2004). “Shear strengthening of timber stringers using GFRP sheets.” MS thesis, Dept. of Civil Engineering, Univ. of Manitoba, Winnipeg, Man., Canada.
Johns, K., and Lacroix, S. (2000). “Composite reinforcement of timber in bending.” Can. J. Civ. Eng., 27, 899–906.
Johns, K., and Racine, P. (2001). “Composite reinforcement of timber in bending.” Proc., 29th Annual Conf. of the Canadian Society for Civil Engineering, Victoria, B.C., 1–6.
National Lumber Grades Authority (NLGA). (2002). Standard grading rules for Canadian lumber 2000, 2002 Ed., New Westminster, B.C., Canada.
Plevris, N., and Triantafillou, T. (1992). “FRP-reinforced wood as structural material.” J. Mater. Civ. Eng., 4(3), 300–317.
Svecova, D., and Eden, R. (2004). “Flexural and shear strengthening of timber beams using GFRP bars—Experimental investigation.” Can. J. Civ. Eng., 31(1), 45–55.
Triantafillou, T. C. (1997). “Shear reinforcement of wood using FRP materials.” J. Mater. Civ. Eng., 9(2), 65–69.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Oct 11, 2004
Accepted: Jan 6, 2006
Published online: Dec 1, 2006
Published in print: Dec 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.