Shear Strengthening of Reinforced Concrete Beams Using Carbon-Fiber-Reinforced Polymer Laminates
Publication: Journal of Composites for Construction
Volume 9, Issue 2
Abstract
Shear failure is catastrophic and occurs usually without advance warning; thus it is desirable that the beam fails in flexure rather than in shear. Many existing reinforced concrete (RC) members are found to be deficient in shear strength and need to be repaired. Externally bonded reinforcement such as carbon-fiber-reinforced polymer (CFRP) provides an excellent solution in these situations. To investigate the shear behavior of RC beams with externally bonded CFRP shear reinforcement, 11 RC beams without steel shear reinforcement were cast at the concrete laboratory of the New Jersey Institute of Technology. After the beams were kept in the curing room for , carbon-fiber strips and fabrics made by Sika Corp. were applied on both sides of the beams at various orientations with respect to the axis of the beam. All beams were tested on a MTS testing machine. Results of the test demonstrate the feasibility of using an externally applied, epoxy-bonded CFRP system to restore or increase the shear capacity of RC beams. The CFRP system can significantly increase the serviceability, ductility, and ultimate shear strength of a concrete beam; thus, restoring beam shear strength by using CFRP is a highly effective technique. An analysis and design method for shear strengthening of externally bonded CFRP has been proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The CFRP laminates and epoxy used in this research were provided by Sika Corporation, N.J. The help and expertise on CFRP application by Mr. David White of Sika Corp. is gratefully acknowledged.
References
American Concrete Institute (ACI. (1999). “Building code requirements for structural concrete.” ACI 318-99, Detroit.
Berset, J.-D. (1992). “Strengthening of reinforced concrete beams for shear using FRP composites.” MS thesis, Dept. of Civil and Environmental Engineering, MIT.
Chajes, M. J., Januska, T. F., Mertz, D. R., Thomson, T. A., Jr., and Finch, W. W., Jr. (1995). “Shear strengthening of reinforced concrete beams using externally applied composite fabrics.” ACI Struct. J., 92(3), 295–303.
Hsu, C. T. T., Bian, H. T., and Jia, Y. X. (1997). “Research for bond-slip using Sika’s Carbodur system.” Report to Sika Corporation, NJIT, Newark, N.J.
Khalifa, A., Gold, W. J., Nanni, A., and Aziz, A. M. I. (1998). “Contribution of externally bonded FRP to shear capacity of RC flexural members.” J. Compos. Constr., 2(4), 195–202.
Sato, Y., Ueda, T., Kakuta, Y., and Tanaka, T. (1996). “Shear reinforcing effect of carbon fiber sheet attached to side of reinforced concrete beams.” Advanced composite materials in bridges and structures, M. M. El-Badry, ed., 621–627.
Triantafillou, T. C. (1998). “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites.” ACI Struct. J., 95(2), 107–115.
Uji, K. (1992). “Improving shear capacity of existing reinforced concrete members by applying carbon fiber sheets.” Transactions of Japan Concrete Institute 14, 253–266.
Zhang, Z. (2003). “Shear strengthening of RC beams using carbon fiber reinforced polymer laminates.” PhD dissertation, Dept. of Civil and Environmental Engineering, NJIT, Newark, N.J.
Zhang, Z., and Hsu, C. T. T. (2000). “Shear behavior of reinforced concrete beams strengthened by Sika’s CFRP laminates.” Technical Rep. Structural Series No. 2000-1, Dept. of Civil and Environmental Engineering, NJIT, Newark, N.J.
Zhang, Z., and Hsu, C. T. T. (2002). “Shear strengthening of RC beams using carbon fiber reinforced polymer strips.” Proc., 15th Eng. Mech. Conf., ASCE, Reston, Va.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jan 16, 2003
Accepted: Aug 18, 2004
Published online: Apr 1, 2005
Published in print: Apr 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.