Absorption of Aramid Prestressing Rods in Aggressive Solutions
Publication: Journal of Composites for Construction
Volume 5, Issue 4
Abstract
Fiber-reinforced plastic (FRP) reinforcing bars are not prone to classical electrochemical corrosion. However, this material may suffer from other degradation mechanisms when exposed to moisture, alkaline, or acid solutions for a long period of time. In the present study, the absorption characteristic of aramid fiber-reinforced plastic (AFRP) prestressing rods with epoxy matrix was investigated in terms of weight gain or loss by immersing the rods in water, alkaline, and acid solutions for more than a year. The results showed that the weight of the 8 mm diameter AFRP rods immersed in water increased in weight marginally. The weight of the rods immersed in an alkaline or acid solution increased significantly. A scanning electron microscope photograph showed the penetration zone at the cross section of the rods when immersed in three different solutions. An electron probe microscope analyzer examination is useful to detect the presence of the ion Na+ from the NaOH solution where the rods were immersed. A Simplified Diffusion Model can predict the depth of penetration and was verified by a scanning electron microscope measurement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Buxton, A., and Baille, C. ( 1994). “A study of the influence of the environment on the measurement of interfacial properties of carbon epoxy resin.” Composites, 25(7), 604–608.
2.
Erki, M. A., and Rizkalla, S. H. ( 1993). “FRP reinforcement for concrete structures.” Concrete International, 15(2), 155–169.
3.
Gerritse, A., and Werner, J. ( 1991). “Arapree, a non-metallic tendon.” Advanced composites material in civil engineering structures, S. L. Iyer and R. Sen, eds., ASCE, New York, 143–153.
4.
Hamidah, H. M. ( 1997). “Deterioration of steel and FRP in high performance concrete in aggressive environment.” PhD thesis, University of New South Wales, Sydney, Australia.
5.
Kakihara, R., Kamiyoshi, M., Kumagai, S., and Noritake, K. ( 1991). “A new aramid rod for the reinforcement of prestressed concrete structure.” Advanced composites material in civil engineering structures, S. L. Iyer and R. Sen, eds., ASCE, New York, 132–153.
6.
Katsuki, F., and Uomoto, T. ( 1995). “Prediction of deterioration of FRP rods due to alkali attack.” Non-metallic (FRP) reinforcement for concrete structures, Proc., 2nd Int. RILEM Symposium, L. Taerwe, ed., E & FN Spon, London, 82–89.
7.
Mebarkia, S., and Vipulanandan, C. (1995). “Mechanical properties and water diffusion in polyester polymer concrete.”J. Engrg. Mech., ASCE, 121(12), 1359–1365.
8.
Pritchard, G., and Speake, S. D. ( 1987). “The use of water absorption kinetic data to predict laminate property changes.” Composites, 18, 227–232.
9.
Riewald, P. G. ( 1988). “Kevlar aramid fibers—Properties and industrial applications.” Proc., Industrial Fibres and Fabrics Conf., 19.
10.
Shen, C. H., and Springer, G. S. ( 1977). “Moisture absorption and desorption of composite materials.” J. Comp. Mat., 10, 2–17.
11.
Scultheisz, C. R., et al. ( 1996). “Effect of temperature and fiber coating on the strength of E-glass fibers and the E-glass epoxy interface for single-fiber fragmentation samples immersed in water.” Fiber, matrix and interface properties, ASTM STP 1290, C. J. Spragg and l. T. Drzal, eds., 103–131.
Information & Authors
Information
Published In
History
Received: Jun 19, 2000
Published online: Nov 1, 2001
Published in print: Nov 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.