Laboratory Characterization of Steeply Dipping Expansive Bedrock in the Rocky Mountain Front Range
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 131, Issue 9
Abstract
Civil infrastructure in the foothills of the Rocky Mountains faces a unique geological hazard arising from underlying beds of steeply dipping expansive bedrock. Efforts to mitigate damaging differential movements that commonly occur among adjacent bedrock strata near the surface typically involve overexcavation and recompaction of the in situ materials as engineered fill. This paper examines the practice by quantifying the swelling-related properties of two dissimilar bedrock end members obtained from a site near Denver, Colo. where overexcavation is warranted. Atterberg limits, compaction, suction, and volume change (shrinkage) tests are conducted for each end member and several mixtures prepared to represent the wide range of subsurface conditions expected in the region. The objective is to examine the extent to which properties of the remolded fill may be predicted from the properties and relative amounts of the end member materials comprising it. Linear relationships are found between end member mass fraction and each of the properties measured [liquid limit, plasticity limit, plasticity index, , and ], thus providing a quantitative basis for simplifying the design of future overexcavation programs. Optimum moisture content occurs at 90% saturation regardless of bentonite mass fraction. Suction compression index for compacted specimens is found insensitive to molding water content.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
David C. Noe, Chief of Engineering Geology at the Colorado Geological Survey, Department of Natural Resources, initially identified the bedrock exposure examined in this study and provided Figs. 1 and 2.
References
Brasher, B. R., Franzmeier, D. P., Volassis, V. T., and Davidson, S. E. (1966). “Use of saran resin to coat natural soil clods for bulk density and water retention measurements.” Soil Sci., 101, 108.
Chen, F. H. (1988). Foundations on expansive soils, American Elsevier Science, New York.
Gill, J. D., West, M. W., Noe, D. C., Olsen, H. W., and McCarty, D. K. (1996). “Geologic control of severe expansive clay damage to a subdivision in the Pierre Shale.” Clays Clay Miner., 44(4), 530–539.
Gipson, H., Jr. (1988). “Unique Front Range geology: Impact on civil works.” Up and Down Soils: A One Day Technical Seminar on Moisture Sensitive Soils, Paper 4, ASCE, Reston, Va.
Jefferson County Zoning Resolution. (1997). “Section 46: Dipping bedrock (D-B) overlay district.” Jefferson County, Colo., July 1997.
Krosley, L., Likos, W. J., and Lu, N. (2003). “Alternative encasement materials for the CLOD test.” Geotech. Test. J., 26(4), 461–463.
Likos, W. J. (2000). “Total suction-water content relationships for expansive soils.” PhD dissertation, Colorado School of Mines, Golden, Colo.
Likos, W. J., Lu, N., and Sharkey, K. J. (2004). “Geotechnical properties of overexcavated expansive shale at a steeply-dipping bedrock site.” Geotechnical Engineering for Transportation Projects, ASCE STP 126, M. K. Yegian and E. Kavazanjain, eds., 1095–1104.
McKeen, R. G. (1981). “Design of airport pavements on expansive soils.” DOT/FAA/RD-81/25, Systems Research and Development, Federal Aviation Administration, Washington, D.C.
McKeen, R. G. (1985). “Validation of procedures for pavement design on expansive soils.” DOT/FAA/PM-85-15, Program Engineering and Maintenance Service, Federal Aviation Administration, Washington, D.C.
McKeen, R. G. (1992). “A model for predicting expansive soil behavior.” Proc., 7th Int. Conf. on Expansive Soils, 1, 1–6.
McQueen, I. S., and Miller, R. F. (1974). “Approximating soil moisture characteristics from limited data: Empirical evidence and tentative model.” Water Resour. Res., 10(3), 521–527.
Nagaraj, T. S., Murthy, B. R., and Bindumadhava, V. (1987). “Liquid limit determination further simplified.” Geotech. Test. J., 12(4), 302–307.
Nelson, J. D., and Miller, D. J. (1992). Expansive soils: Problems and practice in foundation and pavement engineering, Wiley, New York.
Newman, A. C. D. (1987). “The interaction of water with clay mineral surfaces.” Chemistry of Clays Clay Miner., Mineralogical Society Monograph No. 6, A. C. D. Newman, ed., 237–274.
Noe, D. C. (1997). “Heaving-bedrock hazards, mitigation, and land-use policy: Front Range Piedmont, Colorado.” Envir. Geosciences., 4(2), 48–57.
Noe, D. C. (2003). “Case history of damage to a school building caused by differentially heaving bedrock.” J. Perform. Constr. Facil., 17(2), 97–105.
Noe, D. C., and Dodson, M. D. (1995). “The dipping bedrock overlay district: An area of potential heaving bedrock hazards associated with expansive, steeply-dipping bedrock in Douglas County, Colorado.” Colorado Geological Survey, Open-File Rep. No. 95-5, Denver.
Perko, H. A., Thompson, R. W., and Nelson, J. D. (2000). “Suction compression index based on CLOD test results.” Advances in Unsaturated Geotechnics, C. D. Shackelford et al. ed., ASCE, Reston, Va., 392–408.
Polidori, E. (2003). “Proposal for a new plasticity chart.” Geotechnique, 53(4), 397–406.
Schultz, L. G. (1978). “Mixed-layer clay in the Pierre Shale and equivalent rocks, Northern Great Plains Region.” U.S. Geological Survey Professional Paper 1064-A, Reston, Va.
Seed, H. B., Woodward, R. J., and Lundgren, R. (1964). “Fundamental aspects of the Atterberg limits.” J. Soil Mech. Found. Div., 90(6), 75–106.
Sharkey, K. (2002). “Geotechnical engineering behavior of Denver expansive clay shale.” MS thesis, Colorado School of Mines, Golden, Colo.
Simpson, H. E., and Hart, S. S. (1980). “Preliminary engineering geology map of the Morrison Quadrangle, Colorado.” USGS Open File Rep. No. OF-80-654, Reston. Va.
Thompson, R. W. (1992). “Performance of foundations on steeply dipping claystone.” Proc., 7th Int. Conf. on Expansive Soils, 1, 438–442.
Thompson, R. W. (1997). “Evaluation protocol for repair of residences damaged by expansive soils.” Unsaturated Soil Engineering Practice, ASCE Geotechnical Special Publication No. 68, 255–276, Reston, Va.
Thompson, R. W., and McKeen, R. G. (1995). “Heave prediction using soil suction, a case history.” Soil Suction Applications in Geotechnical Engineering Practice, ASCE Geotechnical Special Publication No. 48, 1–12, Reston, Va.
U.S. Bureau of the Census. (2002). Douglas County, Colo., ⟨http://www.douglas.co.us/DC/facts.htm⟩
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 131 • Issue 9 • September 2005
Pages: 1162 - 1171
Copyright
© ASCE.
History
Received: Apr 12, 2004
Accepted: Nov 19, 2004
Published online: Sep 1, 2005
Published in print: Sep 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.