Mechanical Analysis of Idealized Shallow Hydraulic Fracture
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 128, Issue 6
Abstract
The characteristics of hydraulic fractures created at shallow depths are known from excavations and borings, but this understanding has lagged behind the ability to predict fracture growth. This paper describes a simple analysis based on elasticity theory and fracture mechanics that will predict characteristics of shallow hydraulic fractures that are relatively flat lying. The analysis gives closed-form expressions for the injection pressure, fracture aperture, and radial length as functions of time, fracture toughness, and elastic modulus. The analysis is first used to estimate fracture toughness and elastic modulus of shallow formations from field tests of hydraulic fracturing. Those parameters are used to calibrate the model and predict the growth of fractures. The average relative error of the predictions is about 20% and increases with the dip and degree of asymmetry of the fracture.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bjerrum, L., Nash, J. K. L., Kennard, R. M., and Gibson, R. E.(1972). “Hydraulic fracturing in field permeability testing.” Geotechnique, 22, 319–332.
Caron, C. (1982). “The state of grouting in the 1980s.” Proc., Conf. on Grouting in Geotechnical Engineering, W. H. Baker, ed., ASCE, New York, 346–358.
Carter, B. J., Desroches, J., Ingraffea, A. R., and Wawrzynek, P. A. (2000). “Simulating fully 3D hydraulic fracturing,” Modeling in geomechanics, M. Zaman, J. R. Booker, and G. Gioda, eds., Wiley, New York.
Carter, R. D., Appendix to paper by Howard, C. C. and Fast, C. R. (1957). “Optimum fluid characteristics for fracture extension.” Drilling Prod. Prac., API, 267.
Chandler, S. C. (1997). “Lense grouting with fiber admixture to reinforce soil.” Grouting: Compaction, remediation and testing, C. Vipulanandan, ed., ASCE, New York, 147–156.
Dyskin, A. V., Germanovich, L. N., and Ustinov, K. B.(1999). “Asymptotic analysis of crack interaction with free boundary.” Int. J. Solids Struct., 37(6), 857–886.
Gidley, J. L., Holditch, S. A., Nierode, D. E., and Veatch, R. W. (1989). Recent advances in hydraulic fracturing, Society Petroleum Engineers Monograph, 452.
Harison, J. A., Hardin, B. O., and Mahboub, K.(1994). “Fracture toughness of compacted cohesive soils using a ring test.” J. Geotech. Eng., 120(5), 872–891.
Love, A. E. H. (1927). A treatise on the mathmatical theory of elasticity, Dover, New York, 481.
Mahar, L. J., and O’Neill, M. W.(1983). “Geotechnical characterization of desiccated clay.” J. Geotech. Eng., 109(1), 56–71.
Morgenstern, N. R., and Vaughan, P. R. (1963). “Some observations on allowable grouting pressures.” Proc., Conf. Grouts and Drill. Muds, Institute of Civil Engineering, London, 36–42.
Morris, P. H., Graham, J., and Williams, D. J. (1994). “Crack depths in drying clay using fracture mechanics.” Fracture mechanics applied to geotechnical engineering, L. E. Vallejo and R. L. Liang, eds., ASCE, New York, 40–53.
Murdoch, L. C. (1988). “Innovative delivery and recovery using hydraulic fracturing.” Proc., 14th Annual USEPA Research Symposium, 613.
Murdoch, L. C. (1989). “A field test of hydraulically fracturing glacial till.” Proc., 15th Annual USEPA Research Symposium, Cincinnati.
Murdoch, L. C. (1991). “The hydraulic fracturing of soil.” PhD dissertation, Univ. of Cincinnati.
Murdoch, L. C.(1993a). “Hydraulic fracturing of soil during laboratory experiments: methods and observations.” Geotechnique, 43(2), 255–265.
Murdoch, L. C.(1993b). “Hydraulic fracturing of soil during laboratory experiments: propagation.” Geotechnique, 43(2), 266–276.
Murdoch, L. C.(1993c). “Hydraulic fracturing of soil during laboratory experiments: theoretical analysis.” Geotechnique, 43(2), 277–287.
Murdoch, L. C.(1995). “Forms of hydraulic fractures created during a field test in fine-grained glacial drift.” Q. J. Eng. Geol., 28, 23–35.
Murdoch, L. C. (2000). “Remediation of organic chemicals in the vadose zone.” Vadose Zone, Science and Technology Solutions, B. B. Looney and R. W. Falta, eds., Battelle, 949–1237.
Murdoch, L. C., and Slack, W. W.(2002). “Forms of hydraulic fractures in shallow fine-grained formations.” J. Geotech. Geoenviron. Eng., 128(6), 479–487.
Murdoch, L. C., Slack, W., Siegrist, R., Vesper, S., and Meiggs, T. (1997). “Advanced hydraulic fracturing methods to create in situ reactive barriers.” Proc., Int. Containment Technology Conf. and Exhibition, St. Petersburg, FL, sponsored by DOE and USEPA.
Murdoch, L. C., Wilson, D., Savage, K., Slack, W., and Uber, J. (1995). Alternative methods for fluid delivery and recovery, USEPA/625/R-94/003.
Nilson, R. H.(1986). “An integral method for predicting hydraulic fracture propagation driven by gases or liquids.” Int. J. Numer. Methods Geomech., 10, 191–211.
Nolte, K. G. (1989). “Fracturing-pressure analysis.” Recent advances in hydraulic fracturing, J. L. Gidley, ed., Soc. Petrol. Eng. Monograph, 12, 297–316.
Perkins, T. K., and Kern, L. R.(1961). “Widths of hydraulic fractures.” J. Pet. Technol., 937–949.
Pollard, D. D.(1973). “Derivation and evaluation of a mechanical model for sheet intrusions.” Tectonophysics, 19, 233–269.
Pollard, D. D. (1978). “Forms of hydraulic fractures as deduced from field studies of sheet intrusions.” United States Symposium of Rock Mechanics, Y. S. Kim, ed., Univ. of Nevada, Reno, Nev., 1–9.
Pollard, D. D., and Holzhausen, G.(1979). “On the mechanical interaction between a fluid-filled fracture and the earth’s surface.” Tectonophysics, 53, 27-57.
Pollard, D. D., and Johnson, A. M.(1973). “Mechanics of growth of some laccolihic intrusions in the Henry Mountains, Utah, II.” Tectonophysics, 18, 311–354.
Sun, R. J.(1969). “Theoretical size of hydraulically induced fractures and corresponding surface uplift in an idealized medium.” J. Geophys. Res., 74, 5995–6011.
Terzaghi, K., and Peck, R. B. (1967). Soil mechanics in engineering practice, Wiley, New York, 729
Vallejo, L. E., and Liang, R. L., eds. (1994). Fracture mechanics applied to geotechnical engineering, ASCE, New York.
Veatch, R. W.(1983a). “Overview of current hydraulic fracturing design and treatment technology—Part 1.” J. Pet. Technol., 677–687.
Veatch, R. W.(1983b). “Overview of current hydraulic fracturing design and treatment technology—Part 2.” J. Pet. Technol., 853–863.
Williams, J. G. (1984). Fracture mechanics of polymers, Wiley, New York, 302.
Wong, H. Y., and Farmer, I. W.(1973). “Hydrofracture mechanisms in rock during pressure grouting.” Rock Mech., 5, 21–41.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 128 • Issue 6 • June 2002
Pages: 488 - 495
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Oct 23, 2000
Accepted: Sep 6, 2001
Published online: May 15, 2002
Published in print: Jun 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.