Forms of Hydraulic Fractures in Shallow Fine-Grained Formations
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 128, Issue 6
Abstract
Hydraulic fractures have been created in fine-grained formations at depths of 2–10 m to improve the performance of environmental remediation projects at dozens of locations and in a wide range of geologic conditions. The effectiveness of a hydraulic fracture during remediation will depend primarily on its form; that is, its shape, thickness, orientation, length, width, and location with respect to the borehole. The forms of many hydraulic fractures have been determined by mapping exposures in excavations and by compiling split-spoon sampling data. These observations indicate that a typical hydraulic fracture at shallow depths is gently dipping, slightly elongate in plan, and slightly asymmetric with respect to the parent borehole. Shallow hydraulic fractures lift the ground surface to produce gentle domes, and the pattern of uplift reflects the location and thickness of the fracture at depth. The forms of hydraulic fractures created over a narrow range of depths at the same site are similar, but the forms can vary markedly between sites and at different depths at the same site. This indicates that the forms of hydraulic fractures will be relatively consistent when they are created under similar conditions, but changes in geologic conditions can markedly affect fracture form.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bjerrum, L., Nash, J. K. L., Kennard, R. M., and Gibson, R. E.(1972). “Hydraulic fracturing in field permeability testing.” Geotechnique, 22, 319–332.
Chandler, S. C. (1997). “Lense grouting with fiber admixture to reinforce soil.” Grouting: Compaction, remediation and testing, ASCE, New York, 147–157.
Chen, J-L., and Murdoch, L. C.(1999). “Effects of electroosmosis on natural soil: Field test.” J. Geotech. Geoenviron. Eng., 125(12), 1090–1098.
Davis, P. M.(1983). “Surface deformation associated with a dipping hydrofracture.” J. Geophys. Res., [Space Phys.], 88, 5826–5834.
Du, Y., Aydin, A., and Murdoch, L. C.(1993). “Incremental growth of a shallow hydraulic fracture at a waste remediation site, Oakbrook, Illinois from inversion of elevation changes.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 30(7), 1273–1279.
Frere, J. M., and Baker, J. E. (1995). “Use of soil fracturing to enhance soil vapor extraction, a case study.” Emerging technologies in hazardous waste management VII, American Chemical Society, Atlanta, GA.
Gidley, J. L., Holditch, S. A., Nierode, D. E., and Veatch, R. W. (1989). Recent advances in hydraulic fracturing. Society Petroleum Engineers Monograph. 452.
Glantz, S. A. (1992). Primer of biostatistics, 3rd Ed., McGraw-Hill, New York, 440.
Harison, J. A., Hardin, B. O., and Mahboub, K.(1994). “Fracture toughness of compacted cohesive soils using a ring test.” J. Geotech. Eng., 120(5), 872–891.
Holzhausen, G. R., Haase, C. S., Stow, S. H., and Gazonas, G. (1985). “Hydraulic-fracture growth in dipping anisotropic strata as viewed through the surface deformation field.” Proc., 26th U.S. Symposium on Rock Mechanics, Rapid City, SD.
Mahar, L. J., and O’Neill, M. W.(1983). “Geotechnical characterization of dessicated clay.” J. Geotech. Eng., 109(1), 56–71.
Morgenstern, N. R., and Vaughan, P. R. (1963). “Some observations on allowable grouting pressures.” Proc., Conf. Grouts and Drill. Muds, Institute of Civil Engineering, London, 36–42.
Murdoch, L. C. (1988). “Innovative delivery and recovery using hydraulic fracturing.” Proc., 14th Annual USEPA Research Symposium, 613.
Murdoch, L. C. (1989). “A field test of hydraulically fracturing glacial till.” Proc., 15th Annual USEPA Research Symposium, Cincinnati.
Murdoch, L. C.(1993a). “Hydraulic fracturing of soil during laboratory experiments: methods and observations.” Geotechnique, 43(2), 255–265.
Murdoch, L. C.(1993b). “Hydraulic fracturing of soil during laboratory experiments: propagation.” Geotechnique, 43(2), 266–276.
Murdoch, L. C.(1993c). “Hydraulic fracturing of soil during laboratory experiments: theoretical analysis.” Geotechnique, 43(2), 277–287.
Murdoch, L. C.(1995). “Forms of hydraulic fractures created during a field test in fine-grained glacial drift.” Q. J. Eng. Geol., 28, 23–35.
Murdoch, L. C. (2000). “Remediation of organic chemicals in the vadose zone.” Vadose Zone, Science and Technology Solutions, B. B. Looney and R. W. Falta, eds., Battelle, 1540.
Murdoch, L. C.(2002). “Mechanical analysis of idealized shallow hydraulic fracture.” J. Geotech. Geoenviron. Eng., 128(6), 488–495.
Murdoch, L. C., and Chen, J-L.(1997). “Effects of conductive fractures during in situ electroosmosis.” J. Hazardous Mater., 55, 239–262.
Murdoch, L. C., Slack, W., Siegrist, R., Vesper, S., and Meiggs, T. (1997). “Advanced hydraulic fracturing methods to create in situ reactive barriers.” Proc., Int. Containment Technology Conf. and Exhibition, St. Petersburg, Fla.
Murdoch, L. C., Wilson, D., Savage, K., Slack, W., and Uber, J. (1995). Alternative methods for fluid delivery and recovery. USEPA/625/R-94/003.
Pollard, D. D., and Holzhausen, G.(1979). “On the mechanical interaction between a fluid-filled fracture and the earth’s surface.” Tectonophysics, 53, 27–57.
Pollard, D. D., and Muller, O. H.(1976). “The effect of gradients in regional stress and magma pressure on the form of sheet intrusions in cross section.” J. Geophys. Res., 81(5), 975–983.
Soderman, L. G., and Kim, Y. D.(1970). “Effect of groundwater levels on stress history of the St. Clair clay till deposit.” Can. Geotech. J., 7, 173–187.
USGS Sheet 86. (1967). Distribution of principal kinds of soils: orders, suborders, and great groups.
Wong, H. Y., and Farmer, I. W.(1973). “Hydrofracture mechanisms in rock during pressure grouting.” Rock Mech., 5, 21–41.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Sep 6, 2000
Accepted: Aug 28, 2001
Published online: May 15, 2002
Published in print: Jun 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.