Use of Class C Fly Ashes for the Stabilizationof an Expansive Soil
This article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 127, Issue 7
Abstract
Excessive heave associated with swelling of expansive soils can cause considerable distress to lightweight civil engineering structures. Several methods have been suggested to control this problem. The most commonly used method is addition of stabilizing agents, such as lime or cement to the expansive soil. In this study, high-calcium and low-calcium class C fly ashes from the Soma and Tuncbilek thermal power plants, respectively, in Turkey, were used for stabilization of an expansive soil. An evaluation of the expansive soil-lime, expansive soil-cement, and expansive soil-fly ash systems is presented. Lime and cement were added to the expansive soil at 0–8% to establish baseline values. Soma fly ash and Tuncbilek fly ash were added to the expansive soil at 0–25%. Test specimens were subjected to chemical composition, grain size distribution, consistency limits, and free swell tests. Specimens with fly ash were cured for 7 days and 28 days, after which they were subjected to oedometer free swell tests. Based on the favorable results obtained, it can be concluded that the expansive soil can be successfully stabilized by fly ashes.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cabrera, J. G., and Woolley, G. R. ( 1994). “Fly ash utilization in civil engineering.” Environmental aspects of construction with waste materials, studies in environmental science, Vol. 60, Elsevier Science, Amsterdam, 345–356.
2.
Chen, F. H. ( 1975). Foundations on expansive soils, Elsevier Science, Amsterdam.
3.
Çokça, E. (1997). “Frost susceptibility properties of soma-B fly ash.”J. Energy Engrg., ASCE, 123(1), 1), 1–10.
4.
Edil, T. B., Berthoueux, P. M., and Vesperman, K. D. ( 1987). “Fly ash as a potential waste liner.” Proc., Geotech. Pract. for Waste Disposal '87, R. D. Woods, ed., ASCE, New York, 447–461.
5.
Kehew, A. E. ( 1995). Geology for engineers and environmental scientists, Prentice-Hall, Englewood Cliffs, N.J.
6.
Lane, R. O., and Best, J. F. ( 1982). “Properties and use of fly ash in Portland cement concretes.” Concrete Int., 4(7), 81–92.
7.
Nelson, J. D., and Miller, D. J. ( 1992). Expansive soils, problems and practice in foundation and pavement engineering, Wiley, New York.
8.
Rollings, M. P., and Rollings, R. S. ( 1996). Geotechnical materials in construction, McGraw-Hill, New York.
9.
Schaefer, V. R., Abramson, L. W., Drumheller, J. C., and Sharp, K. D., eds. ( 1997). “Ground improvement, ground reinforcement and ground treatment: Developments 1987–1997.” Geotech. Spec. Publ. No. 69, ASCE, New York.
10.
Transportation Research Board (TRB). ( 1976). “State of the art: Lime stabilization, reactions, properties, design, construction.” Transp. Res. Circular No. 180, Washington, D.C.
11.
Usmen, M. A., Baradan, B., and Yazici, S. ( 1992). “Geotechnical and geoenvironmental properties of stabilized lignite fly ash.” Proc., Mediterranean Conf. on Envir. Geotechnology, M. A. Usmen and Y. B. Acar, eds., Balkema, Rotterdam, The Netherlands, 419–427.
Information & Authors
Information
Published In
History
Received: Jun 30, 1998
Published online: Jul 1, 2001
Published in print: Jul 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.