Distribution Factors for Curved Continuous Composite Box-Girder Bridges
Publication: Journal of Bridge Engineering
Volume 10, Issue 6
Abstract
The use of horizontally curved composite box-girder bridges in modern highway systems has become increasingly popular for economic as well as for aesthetic considerations. Based on a recent literature review on the design of box-girder bridges, it was observed that a simple design method for curved bridges, based on load distribution factors for stresses and shears, is as yet unavailable. This paper presents the results of an extensive parametric study, using a finite element method, in which the structural responses of 240 two-equal-span continuous curved box-girder bridges of various geometries were investigated. The parameters considered in this study included span-to-radius of curvature ratio, span length, number of lanes, number of boxes, web slope, number of bracings, and truck loading type. Based on the data generated from this study, empirical formulas for load distribution factors for maximum longitudinal flexural stresses and maximum deflection due to dead load as well as AASHTO live loading were deduced. An illustrative design example is presented.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
This research was supported by the Natural Sciences and Engineering Council of Canada.
References
American Association for State Highway and Transportation Officials (AASHTO). (1996). Standard specifications for highway bridges, 16th Ed., AASHTO, Washington, D.C.
American Association for State Highway and Transportation Officials (AASHTO). (2003). Guide specifications for horizontally curved highway bridges, AASHTO, Washington, D.C.
American Association for State Highway and Transportation Official Load and Resistance Factor Design (AASHTO LRFD). (1998). Bridge design specifications, AASHTO, Washington, D.C.
Bakht, B., and Jaeger, L. G. (1992). “Ultimate load test of slab-on-girder bridges.” J. Struct. Eng., 118(6), 1608–1624.
Canadian Standards Association (CSA). (2000). Canadian highway bridge design code, CSA, Etobicoke, Ont., Canada.
Foinquinos, R., Kuzmanovic, B., and Vargas, L. (1997). “Influence of diaphragms on live load distribution in straight multiple steel box girder bridges.” Proc., 15th Structures Congress, New York, ASCE, 89–93.
Goldos, N. H. (1988). “A theoretical investigation of the dynamic behavior of horizontally curved steel box girder bridges under truck loadings.” PhD dissertation, Univ. of Maryland, College Park, Md.
Hall, D. H., and Yoo, C. H. (1999). “Improved design specifications for horizontally curved steel girder highway bridges.” NCHRP Project 12–38, BSDI, Ltd., Coopersburg, Pa.
Heins, C. P. (1978). “Box girder bridge design -start-of-the-art.” AISC Eng. J., 2, 126–142.
Hibbitt, H. D., Karlson, B. I., and Sorenson, E. P. (2002). ABAQUS version 6.2 finite element program; user’s manual, Hibbitt, Karlson and Sorenson, Inc., Providence, R.I.
Mabsout, M., Tarhini, K. M., Frederick, G. R., and Kesservan, A. (1998). “Effect of continuity on wheel load distribution in steel girder bridges.” J. Bridge Eng., 3(3), 103–110.
Mattock, A. H., and Fountain, R. S. (1967). Criteria for design of steel–concrete composite box girder highway bridges, United States Steel Corporation, Pittsburgh.
Mertz, D. R. (1996). “Cross-frame diaphragms for steel girder bridges using the AASHTO LRFD Bridge Design Specifications.” Proc., 14th Structures Congress, ASCE, New York, (2), 307–312.
Mlinistry of Transportation (MTO). (1994). Geometric design standards for Ontario highways, Ministry of Transportation, Downsview, Ont., Canada.
Normandin, P., and Massicotte, B. (1994). “Load distribution in composite steel box girder bridges.” Proc. 4th Int. Conf. on Short and Medium Span Bridges, Halifax, N.S., Canada, 165–176.
Samaan, M. (2004). “Dynamic and static analyses of continuous curved composite multiple-box girder bridges.” PhD dissertation, Univ. of Windsor, Windsor, Ont., Canada.
Samaan, M., Sennah, K., and Kennedy, J. (2001). “Comparative structural behavior of multi-cell and multiple-spine box girder bridges.” published in the Proc. Int. Conf. on Structural Engineering, Mechanics and Computation, Cape Town, South Africa.
Samaan, M., Sennah, K. M., and Kennedy, J. B. (2002). “Positioning of bearings for curved continuous spread-box girder bridges.” Can. J. Civ. Eng., 29, 641–652.
Sennah, K. M., and Kennedy, J. B. (1999). “Load distribution factors for composite multicell box girder bridges.” J. Bridge Eng., 4(1), 71–78.
Sennah, K. M., and Kennedy, J. B. (1998). “Shear distribution in simply-supported curved composite cellular bridges.” J. Bridge Eng., 3(2), 47–55.
Zokai, T., Osterkam, T. A., and Imbsen, R. A. (1992). “Distribution of wheel loads on highway bridges.” NCHRP Rep. 12–26/1, Transportation Research Record, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: May 29, 2003
Accepted: Aug 12, 2004
Published online: Nov 1, 2005
Published in print: Nov 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.