Behavior, Analysis, and Design of an Instrumented Link Slab Bridge
Publication: Journal of Bridge Engineering
Volume 10, Issue 3
Abstract
Presented in this paper are the results of a research project on the monitoring and assessment of the first link slab jointless bridge in the state of North Carolina. The structure was instrumented with a remote data acquisition system and monitored for over a year. In addition, a controlled load test was conducted in an effort to determine the demand on the link slab under known loads. A procedure for the limit-states design of a link slab system is also presented. Results indicate that while the crack size in the link slab exceeded the design level, the link slab fulfilled its function. Furthermore, the rotational demand from the large controlled loads as well as the traffic loads was similar in magnitude to the thermal induced rotations due to the difference in temperature between the top and bottom of the bridge.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was supported by the North Carolina Department of Transportation under research grant HWY-2001-01. In addition, several NCDOT engineers were very helpful during the project period including Tim Rountree, Rodger Rochelle, Moy Biswas, Rob Woodruff, and Tom Koch. The writers would also like to thank Paul Zia, Matt Wagner, Bruce Warren, Jerry Atkinson, and Bill Dunleavy for their various contributions to the large instrumentation effort.
References
American Association of State Highway and Transportation Officials (AASHTO). (1996). sStandard specifications for highway bridges, 16th Ed., Highway Subcommittee on Bridges and Structure, AASHTO, Washington, D.C.
AM25T solid state multiplexer instruction manual. (1998a). Campbell Scientific Inc., Edmonton, Alberta, Canada.
AM416 relay multiplexer instruction manual. (1996). Campbell Scientific Inc., Edmonton, Alberta, Canada.
COM200 instruction manual. (1998b). Campbell Scientific Inc., Edmonton, Alberta, Canada.
CR23X micrologger operator’s manual. (1998c). Campbell Scientific Inc., Edmonton, Alberta, Canada.
MSX10, MSX10R, and MSX20R solar panels instruction manual. (1994). Campbell Scientific Inc., Edmonton, Alberta, Canada.
PC208W datalogger support software instruction manual. (1998d). Campbell Scientific Inc., Edmonton, Alberta, Canada.
Caner, A., and Zia, P. (1998). “Behavior and design of link slabs for jointless bridge decks.” PCI J., 43(3), 68–80.
El-Safty, A. K. (1994). “Analysis of jointless bridge decks with partially debonded simple span beams.” PhD dissertation, North Carolina State University, Raleigh, NC.
McCormac, J. C. (1998). Design of reinforced concrete, Addison-Wesley, Menlo Park, Calif.
Visual Analysis; software manual. (2000). http://www.iesweb.com/.
Wagner, M. (2001). “The behavior of prestressed high performance concrete bridge girders for US Highway 401 over the Neuse River in Raleigh, NC.” MSCE thesis, North Carolina State University, Raleigh, N.C.
Warren, B. (2000). “Development of a data acquisition system for an instrumented highway structure.” MSCE thesis, North Carolina State University.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Aug 11, 2003
Accepted: May 3, 2004
Published online: May 1, 2005
Published in print: May 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.