Vehicle Collision with Bridge Piers
Publication: Journal of Bridge Engineering
Volume 10, Issue 3
Abstract
Inelastic transient finite element simulations are used to investigate the demands generated during collisions between vehicles and bridge piers. Such collisions have occurred in the past, sometimes with catastrophic consequences. Two different types of trucks and two different bridge/pier systems are used in the simulations. The approach speeds for the trucks range from 55 to 135 kph. Various quantities of interest are extracted from the finite element results and used to develop a better understanding of the vehicle/pier crash process and to critique current specifications addressing such events. Although physical vehicle–pier impact tests were not carried out as part of this research, a variety of exercises are conducted to provide confidence in the analysis results. The simulations show that current collision design provisions could be unconservative and that there may be a population of bridge piers that are vulnerable to accidental or malicious impact by heavy trucks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support for this research was provided in part by the Florida Department of Transportation (Project BC-355-6), the National Science Foundation (Project 0334364), and the University of Michigan. The writers are grateful to Dr. Dean Alberson of TTI and Mr. Don Moffett at the Department of State for providing the vehicle/bollard collision data. The opinions stated here are those of the writers and do not necessarily reflect the views of the sponsors or the individuals mentioned above.
References
American Association of State Highway and Transportation Officials Load and Resistance Factor Design (AASHTO-LRFD. (1998). LRFD bridge design specifications—Second edition, AASHTO, Washington, D.C.
American Concrete Institute (ACI). (2005). Building code requirements for structural concrete (318-05) and commentary (318R-05), ACI, Farmington Hills, Mich.
Chopra, A. K. (2001). Dynamic of structures: Theory and applications to earthquake engineering, 2nd Ed., Prentice-Hall, Englewood Cliffs, N.J., 2001.
Dallas-News. (2002). ⟨http://www.dallasnews.com/latestnews/stories/090802dnmetrichland.1368b84.html⟩.
El-Tawil, S. (2004). “Vehicle collision with bridge piers.” Final Report to the Florida Department of Transportation for Project BC-355-6, FDOT/FHWA publication.
LS-DYNA; theory manual for version 960. (2002). Livermore Software Technology Corporation.
Miyamoto, A., King, M. W., and Bulson, P. S. (1994). “Modeling of impact load characteristics for dynamic response analysis of concrete structures.” Structures under shock and impact II, Computational Mechanics Publications, Southampton, Boston, 71–88.
National Transportation Safety Board (NTSB). (1993). “Tractor-semitrailer collision with bridge columns on Interstate 65 Evergeen Alabama.” Highway accident report, NTSB Number HAR-94-2, NTIS Number PB94-916202.
“Nebraska overpass will be rebuilt with fewer piers.” (2003). Engineering News Record, June 9, 25.
Roeder, C. W., Stanton, J. F., and Taylor, A. W. (1987). “Performance of elastomeric bearings.” National Cooperative Highway Research Program Report 298, Transportation Research Board, Washington, D.C.
Zaouk, A. K., Bedewi, N. E., Kan, C. D., and Marzoughi, D. (1996). “Validation of a non-linear finite element vehicle model using multiple impact data.” Crashworthiness and occupant protection in transportation systems, AMD-Vol. 218, ASME, New York, 91–106.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Aug 13, 2003
Accepted: May 4, 2004
Published online: May 1, 2005
Published in print: May 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.