Design and Construction of a Bridge in Very High Performance Fiber-Reinforced Concrete
Publication: Journal of Bridge Engineering
Volume 8, Issue 5
Abstract
The design, technology, and construction of a small road bridge made of very high performance fiber-reinforced concrete is described in this paper. The bridge consists of precast prestressed concrete beams with a cast-in-place ordinary concrete deck. A preliminary experimental investigation was conducted to define the mix design, to establish the properties of the material and its durability, and to study the flexural behavior of the prestressed concrete beams with and without the concrete deck. The effect of steel fibers at the structural level, where there is an influence of constitutive behavior and size effects, was analyzed by testing a prestressed beam using very high performance fiber-reinforced concrete without fibers. The establishment of the structural properties of the material then allowed the design of the final section of the bridge beams and the definition of a model to justify the design rules adopted. This project represents an attempt to demonstrate the industrial feasibility of very high performance concrete structural elements manufactured with conventional raw materials and usual production techniques and to evaluate the production technology when utilizing steel fibers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aïtcin, P. C. (1998). High performance concrete, 1st Ed., E&FN Spon, London.
Balaguru, P. N., and Shah, S. P. (1992). Fiber reinforced cement composites, McGraw-Hill, New York.
Biolzi, L., Guerrini, G. L., and Rosati, G. (1998). “Influence of steel microfibers and microsilica on behavior of high performance cement-based composites.” European Conf. on Composite Materials—Science, Technologies, and Applications (ECCM-8), I. Crivelli Visconti, Woodhead Publications, Naples, Italy, 2, 97–104.
Biolzi, L., Guerrini, G. L., and Rosati, G.(1999). “Frost durability of very high performance cement-based materials.” J. Mater. Civ. Eng., 11(2), 167–171.
EC2. (1991). Eurocode 2, design of concrete structures—Part 1-1: General rules and rules for building, ENV 1992-1-1.
Goodspeed, C. H., Vanikar, S., and Cook, R. A.(1996). “High-performance concrete defined for highway structures.” Concr. Int. 18(2), 62–67.
Guerrini, G. L., Biolzi, L., Cassar, L., and Rosati, G. (1999). “Production and mechanical characterization of very high performance fiber-reinforced concrete beams.” Innovation in concrete structures: Design and innovation, R. K. Dhir and M. R. Jones, eds., Proc., Int. Conf. Creating with Concrete. Thomas Telford, London, 311–322.
Meda, A. (1998). “L’impiego di calcestruzzi ad alte prestazioni in elementi prefabbricati per impalcati da ponte.” Scuola di Specializzazione in Costruzioni in Cemento Armato; F.lli Pesenti, MS thesis, Milan Univ. of Technology, Milan, Italy.
Mehta, P. K., and Monteiro, P. J. M. (1994). “Chapter 5.” Concrete: Structure, properties and materials, Prentice-Hall, Englewood Cliffs, N.J., 113–177.
Naaman, A. E., and Reinhardt, H. W. (1996). “High performance fiber reinforced cement composites 2 (HPFRCC 2).” RILEM Proc. Number 31, E & FN Spon, London.
Russell, H. G.(1999). “ACI defines high performance concrete.” Concr. Int., 21(2), 56–57.
Russell, H. G.(1997). “High performance concrete—From buildings to bridges.” Concr. Int. 8(1), 62–63.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Feb 22, 2001
Accepted: Nov 20, 2002
Published online: Aug 15, 2003
Published in print: Sep 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.