Blast-Resistant Glazing Design
Publication: Journal of Architectural Engineering
Volume 12, Issue 3
Abstract
When blasts occur in urban areas, many injuries and sometimes deaths result when glass shards fly from windows fractured by airblast pressure. The use of blast-resistant glazing can mitigate the number and severity of glass-related injuries if blasts occur. In this paper, the writers present two methods to facilitate blast-resistant glazing design. One of these methods is primarily restricted to government facilities while the other exists in a consensus document for public use. Both of these methods rely on laminated glass as the blast-resistant glazing material. Both methods address all facets of blast-resistant glazing design, including attachment of the glazing to the framing members and an estimate of the forces necessary for designing framing members and connections.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (1996). “Standard test method for glazing and glazing systems subject to airblast loadings.” F 1642-96, West Conshohocken, Pa.
ASTM. (2003). “Standard practice for specifying an equivalent 3-s durations design loading for blast resistant glazing fabricated with laminated glass.” F 2248-03, West Conshohocken, Pa.
ASTM. (2004a). “Standard practice for determining the load resistance of glass in buildings.” E 1300-04, West Conshohocken, Pa.
ASTM. (2004b). “Standard test method for glazing and glazing systems subject to airblast loadings.” F 1642-04, West Conshohocken, Pa.
Blocker, V., and Blocker, T. G., Jr. (1949). “The Texas City disaster: A survey of 3000 casualties.” Am. J. Surg., 78, 756–771.
Brismar, B., and Bregenwald, L. (1982). “The terrorist bomb explosion in Bologna, Italy, 1980: An analysis of the effects and injuries sustained.” J. Trauma, 22(3), 215–220.
Department of Defense (DoD). (2003). “Unified facilities criteria: DoD minimum antiterrorism standards for buildings.” UFC 4-010-01, Washington, D.C.
Fundamentals of protective design for conventional weapons technical manual, TM5-855-1. (1986). Headquarters, Dept. of the Army, Washington, D.C.
Glass Research and Testing Laboratory. (1987). “Misty picture data: Window glass experiment.” Final Data Rep., Texas Tech Univ., Lubbock, Tex.
Norville, H. S., and Conrath, E. J. (2001). “Considerations for blast resistant glazing design.” J. Archit. Eng., 7(3), 80–86.
Norville, H. S., and Conrath, E. J. (2002). “Design procedure for blast resistant laminated glass.” The use of glass in buildings, ASTM Stock Number 1434, 159–170.
Norville, H. S., Harvill, N., Conrath, E. J., Shariat, S., and Mallonee, S. (1999). “Glass-related injuries in the Oklahoma City bombing.” J. Perform. Constr. Facil., 13(2), 50–56.
Norville, H. S., Smith, M. L., and King, K. W. (1995). “Survey of window glass broken by the Oklahoma City bomb on April 19, 1995.” Glass Research and Testing Laboratory, Texas Tech Univ., Lubbock, Tex.
Norville, H. S., Swofford, J. L., Smith, M. L., and King, K. W. (1996). “Survey of window glass broken by the Oklahoma City bomb on April 19, 1995, revised.” Glass Research and Testing Laboratory, Texas Tech Univ., Lubbock, Tex.
Task Committee, Structural Engineering Institute. (1999). “Structural design for physical security: State of the practice.” ASCE, Reston, Va.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Mar 31, 2004
Accepted: Nov 14, 2005
Published online: Sep 1, 2006
Published in print: Sep 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.