Current State of Highway Safety Education: Safety Course Offerings in Engineering and Public Health
Publication: Journal of Professional Issues in Engineering Education and Practice
Volume 134, Issue 1
Abstract
There is a need to investigate educational offerings in highway safety available through engineering, public health, and injury prevention programs at universities in the United States. A series of surveys was distributed to universities and transportation engineering research centers throughout the United States from March 2004 to March 2005, requesting information about safety course availability and content (e.g., course outline, syllabus, references, and notes). Of 117 engineering programs contacted, 29 safety courses were identified at 25 universities; of 34 public health programs, only seven indicated traffic safety content. A detailed assessment of course content and syllabi revealed that many use reference materials drawn from other areas of transportation (e.g., design and operations); few use educational references reflecting contemporary scientific analyses of safety. Existing course content was compared with safety core competencies developed by a Transportation Research Board Subcommittee to provide an indication of adequacy of course content. The comparison indicated relative strengths in identifying origins and characteristics of crash data and safety management systems, but persistent weaknesses in describing highway safety as a field with underlying scientific principles, which drive how analysis is conducted and decisions are made. The courses also lacked a systemic multidisciplinary perspective, important for success in today’s safety management field. While safety is a primary responsibility of transportation engineers, there is a lack of complete and consistent coverage of this topic at the university level.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers gratefully acknowledge the support for this research provided by NCHRP Project No. UNSPECIFIED17-18 and the members of the Transportation Research Board Joint Subcommittee on Safety Workforce Development. Further details regarding the safety core competencies and university scan may be found in Research Results Digest 302.
References
AASHTO. (2001). A policy on geometric design of highways and streets, Washington, D.C.
Committee on Traffic Safety Research and Education. (1962). University transportation and accident prevention centers, Association of State Universities and Land-Grant Colleges.
Gross, F., and Jovanis, P. (2005). Traffic safety course offerings in U.S. graduate engineering and public health programs, The Pennsylvania State University Press, University Park, Pa.
Hauer, E. (2005). “The road ahead.” J. Transp. Eng., 131(5), 333–339.
Injury Prevention and Control. (2004). “2002–2003 Summary of research, faculty expertise, curricula, and training.” ⟨http//:www.asph.org/UserFiles/InjuryAssessment.pdf⟩ (July 22, 2006).
Pline, J., ed. (1999). Traffic engineering handbook, 5th Ed., Institute of Transportation Engineers, Washington, D.C.
Society for Advancement of Violence and Injury Research (SAVIR) and State and Territorial Injury Prevention Directors Association (STIPDA) Joint Committee on Infrastructure Development. (2005). Core competencies for injury and violence prevention, National Training Initiative for Injury and Violence Prevention.
Transportation Research Board (TRB). (2003a). “The workforce challenge: recruiting, training, and retaining qualified workers for transportation and transit agencies.” Special Rep. No. 275, Washington, D.C.
Transportation Research Board (TRB). (2003b). “Two-lane highways (prototype chapter).” Highway safety manual, NCHRP Project 17-18(4), Washington, D.C.
Transportation Research Board. (2006). Research results digest 302, Transportation Research Board, Washington, D.C., 4, 5, 9–10, 13–14.
Transportation Research Board Joint Subcommittee on Safety Workforce Development. (2005). Core competencies for highway safety professionals, Research Results Digest 302, Washington, D.C.
United States Department of Transportation (USDOT). (2003a). Manual on uniform traffic control devices, ⟨http://mutcd.fhwa.dot.gov⟩ (July 22, 2006).
United States Department of Transportation (USDOT). (2003b). Strategic plan 2003–2008: Safer, simpler, smarter transportation solutions, Washington, D.C.
United States Department of Transportation (USDOT). (2004a). Interactive highway safety design model (IHSDM), ⟨http://www.ihsdm.org⟩ (July 22, 2006).
United States Department of Transportation (USDOT). (2004b). Safety analyst, ⟨http://www.safetyanalyst.org⟩ (July 22, 2006).
United States Department of Transportation (USDOT) and National Highway Traffic Safety Administration. (2005). “Motor vehicle traffic crashes as a leading cause of death in the United States, 2002.” Traffic safety facts 2005, National Center for Statistics and Analysis, Washington, D.C.
Information & Authors
Information
Published In
Journal of Professional Issues in Engineering Education and Practice
Volume 134 • Issue 1 • January 2008
Pages: 49 - 58
Copyright
© 2008 ASCE.
History
Received: Jul 28, 2006
Accepted: Oct 16, 2006
Published online: Jan 1, 2008
Published in print: Jan 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.