Standards in Civil Engineering Design Education
Publication: Journal of Professional Issues in Engineering Education and Practice
Volume 134, Issue 1
Abstract
In the United States, requirements in the Accreditation Board for Engineering and Technology (ABET) engineering criteria provide a strong incentive to integrate engineering codes and standards into civil engineering undergraduate curricula. Under the current criteria, specifically Criterion 4, appropriate engineering standards must be incorporated into the major design experience. The purpose of this paper is to discuss the current ABET Engineering Criteria requirements with respect to engineering standards and suggest some ways standards can be included in both the technical and nontechnical portions of undergraduate curricula.
Get full access to this article
View all available purchase options and get full access to this article.
References
Accreditation Board for Engineering and Technology (ABET). (2003). “Engineering criteria 2000, criterion for accrediting engineering programs effective for evaluations during the 2004-2005 cycle.” Baltimore.
Accreditation Board for Engineering and Technology (ABET). (2006a). “Criteria for accrediting engineering programs effective for evaluations during the 2007-2008 cycle.” Baltimore, ⟨http://www.abet.org/Linked%20Documents-UPDATE/Criteria%20and%20PP/E001%2007-08%20EAC%20Criteria%2011-15-06.pdf⟩ (December).
Accreditation Board for Engineering and Technology (ABET). (2006b). “Program evaluator workbook, program evaluator worksheet for 2006-2007 visits.” ⟨http://www.abet.org/pev.shtml⟩ (December).
American Academy of Water Resources Engineers (AAWRE). (2006). “The academy.” ⟨http://www.aawre.org/academy.cfm⟩ (December).
American National Standards Institute (ANSI). (2005). “ANSI essential requirements: Due process requirements for American National Standards.” ⟨http://www.itl.nist.gov/biometrics/Requirements0405.doc⟩ (June).
American Society of Civil Engineers (ASCE). (2001). “Quality management systems standards.” ASCE Policy Statement 431, ⟨http://www.asce.org/pressroom/news/policy_details.cfm?hdlid=90⟩ (June 2005).
American Society of Civil Engineers (ASCE). (2002a). “ASCE rules for standards committees.” ⟨http://www.asce.org/files/pdf/instfound/rules02112004.pdf⟩ (June 2005).
American Society of Civil Engineers (ASCE). (2002b). “Commentary American Society of Civil Engineers program criteria for civil and similarly named engineering programs draft #7.” ⟨http://www.asce.org/public/criteria_commentary.cfm⟩ (June 2005).
American Society of Civil Engineers (ASCE). (2004). “American Society of Civil Engineers (ASCE) Geo-Institute (G-I) Codes and Standards Council (CSC).” ⟨http://www.geoinstitute.org/files/pdf/gicscstrategicplan.pdf⟩ (June 2005).
American Society of Civil Engineers (ASCE). (2005). “International codes and standards.” ASCE Policy Statement 365, ⟨http://www.asce.org/pressroom/news/policy_details.cfm?hdlid=88⟩ (June).
American Society of Civil Engineers (ASCE). (2006). “Water infrastructure security enhancement documents.” ⟨http://www.asce.org/static/1/wise.cfm⟩ (December).
American Society of Mechanical Engineers (ASME). (2004). “Canon 4 overview.” ⟨http://www.professionalpractice.asme.org/engineering/ethics/4.htm⟩ (December 2005).
Batik, A. L. (1992). The engineering standard a most useful tool, BookMaster/El Rancho, Ashland, Ohio.
Ben-Joseph, E. (2004). “Future of standards and rules in shaping place: Beyond the urban genetic code.” IEE J. Solid-State Electron Devices, 130(2), 67–74.
Canadian Engineering Accreditation Board (CEAB). (2005). “Questionnaire for evaluation of engineering programs. 1.” ⟨http://www.ccpe.ca/e/files/acc̱Part1.pdf⟩ (December).
Center for Global Standards Analysis. (2004). “Report on a survey of schools of engineering in the United States concerning standards education.” ⟨http://engineering.cua.edu//StandardsCenter/Research/SurveyII.doc⟩ (June 2005).
Eaton, R. J. (1999). “Getting the most out of environmental metrics.” The Bridge, 29(1), ⟨http://www.nae.edu/nae/bridgecom.nsf/weblinks/NAEW-4NHM88?OpenDocument⟩ (June 2005).
Graedel, T. E., and Allenby, B. R. (1995). Industrial ecology, Prentice- Hall, Englewood Cliffs, N.J.
Gross, J. P. (1991). “Codes, standards, and institutions—Pressures for change,” J. Profl. Issues Eng. Educ. Pract., 117(2), 75–87.
Harris, C. E., Pritchard, M. S., and Rabins, M. J. (2000). Engineering ethics, 2nd Ed., Wadworth/Thomson Learning, Belmont, Calif.
IHS Standards Store. (2006). ⟨http://store.ihs.com/specsstore/controller?event=HOME⟩ (December).
Kelly, W. E., Bickart, T., and Suett, P. (2005). “Incorporating standards in capstone design courses.” ASEE Annual Meeting, Portland, Ore., ⟨http://www.asee.org/acPapers/2005-1808_Final.pdf⟩ (December).
Manufactured Housing Institute (MHI). (2005). “The HUD code.” ⟨http://www.manufacturedhousing.org/lib/showtemp_detail.asp?id=78&cat=5⟩ (December).
Marshall, G. (2000). Safety engineering, American Society of Safety Engineers, Des Plaines, Ill.
National Council of Examiners for Engineering and Surveying (NCEES). (2006a). “Licensure for engineers.” ⟨http://www.ncees.org/licensure/licensure_for_engineers/⟩ (February 2007).
National Council of Examiners for Engineering and Surveying (NCEES). (2006b). “PE design standards.” ⟨http://www.ncees.org/exams/professional/pe_design_standards/⟩ (December).
National Institute of Building Sciences (NIBS). (2005). “The whole building design guide.” ⟨http://www.wbdg. org/⟩ (December).
National Research Council (NRC). (1995). Standards, conformity assessment, and trade: Into the 21st century, National Academy Press, Washington, D.C., ⟨http://www.nap.edu/books/030905236X/html/R1.html⟩ (June).
National Technology Transfer and Advancement Act (NTTAA). (1996). ⟨http://ts.nist.gov/ts/htdocs/210/nttaa/113.htm⟩ (December 2005).
Office of Management and Budget (OMB). (1998). “Federal participation in the development and use of voluntary consensus standards and in conformity assessment activities.” Circular No. A—119, ⟨http://www.whitehouse.gov/omb/circulars/a119/a119.html⟩ (June 2005).
Spivak, S. M., and Brenner, F. C. (2001). Standardization—Principles and practice, Marcel Dekker, New York.
U.S. Congress, Office of Technology Assessment (USCOTA). (1992). “Global standards: Building blocks for the future.” TCT-512. U.S. Government Printing Office, Washington, D.C.
U.S. Environmental Protection Agency (USEPA). (2005). “Model ordinances for source water protection.” ⟨http://yosemite.epa.gov/r10/water.nsf/0/3559706fabdbfe1d882565d80055aba9?OpenDocument⟩ (December).
Wisely, W. H. (2002). The American civil engineer: The history, tradition, and the development of the American Society of Civil Engineers, 1st Ed., Wm. Wisely, revised and updated by V. Fairweather, ASCE, Reston, Va.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 3, 2006
Accepted: Aug 10, 2006
Published online: Jan 1, 2008
Published in print: Jan 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.