Optimization Study and Damage Evaluation in Concrete Mixtures Exposed to Slow Freeze–Thaw Cycles
Publication: Journal of Materials in Civil Engineering
Volume 19, Issue 7
Abstract
This paper presents an application of an optimization based on the Taguchi method for analyzing the deterioration of concrete with different compositions due to freezing and thawing. Effects of four parameters, i.e., water–cement ratio, cement content, amount of air-entrainment, and curing conditions, on the freeze–thaw resistance of concrete were investigated. The deterioration in concrete during the repeated freeze–thaw cycles were quantitatively evaluated in the light of the experimental measurements taken on length changes. It can be concluded that, within the limits of this work, the most important parameter affecting the freezing resistance of the concrete is the air-entraining admixture (AEA). Non-air-entrained concretes were severely damaged exhibiting substantial scaling after a limited number of freeze–thaw cycles. Damage increases significantly after around 1.5% residual length change (expansion) occurs in the specimens without AEA.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alsaran, A., Çelik, A., Çelik, C., and Efeoglu, I. (2004). “Optimization of coating parameters for duplex treated AISI 5140 steel.” Mater. Sci. Eng., A, 371(1–2), 145–152.
Çelik, C., and Burnak, N. (1998). “A systematic approach to the design optimization problem.” Total Qual. Manage., 9(1), 101–108.
Detwiler, R. J., Dalgleish, B. J., and Williamson, R. B. (1989). “Assessing the durability of concrete in freezing and thawing.” ACI Mater. J., 86(1), 29–35.
Diamond, S. (1999). “Aspects of concrete porosity revisited.” Cem. Concr. Res., 29, 1181–1188.
Diamond, S. (2000). “Mercury porosimetry: An appropriate method for the measurement of pore size distributions in cement-based materials.” Cem. Concr. Res., 30, 1517–1525.
Fagerlund, G. (1997). “Internal frost attack—State of the art.” Int. RILEM Workshop on Resistance of Concrete to Freezing and Thawing with or without De-Icing Chemicals, RILEM, Essen, Germany, 321–338.
Fagerlund, G. (2002). “Mechanical damage and fatigue effects associated with freeze-thaw of materials.” 2nd Int. RILEM Workshop on Frost Resistance of Concrete, RILEM, Essen, Germany, 117–132.
Hobbs, D. W., Marsh, B. K., and Matthews, J. D. (1998). “Minimum requirements for concrete to resist freeze-thaw attack.” Minimum requirements for durable concrete, British Cement Association, Crowthome, U.K., 91–130.
Hoff, G. C., and Buck, A. D. (1983). “Considerations in the prevention of damage to concrete frozen at early ages.” ACI J., 80(5), 371–376.
Jacobsen, S., Sxther, D. H., and Sellevold, E. J. (1997). “Frost testing of high strength concrete: Frost/salt scaling at different cooling rates.” Mater. Struct., 30(1), 33–42.
Janssen, D. J. (2002). “Requirements for a test of frost resistance of concrete.” 2nd Int. RILEM Workshop on Frost Resistance of Concrete, RILEM, Essen, Germany, 277–286.
Kackar, R. N. (1985). “Off-line quality control, parameter design and Taguchi method.” J. Quality Technol., 17(4), 176–209.
Kaufmann, J., and Studer, W. (1997). “Length change of concrete specimen during frost deicing salt resistance test.” Int. RILEM Workshop on Resistance of Concrete to Freezing and Thawing with or without De-Icing Chemicals, RILEM, Essen, Germany, 212–221.
Klemm, A. J., and Marks, W. (1998). “Multicriteria optimization of polymer modified composites subjected to freezing and thawing cycles.” Build. Environ., 34(3), 369–375.
Marchand, J., Pigeon, M., Bager, D., and Talbot, C. (1999). “Influence of chloride solution concentration on deicer salt scaling deterioration of concrete.” ACI Mater. J., 96(4), 429–435.
Palecki, S., and Setzer, M. J. (2002). “Investigations of high-performance concrete under frost attack—Internal damage and water uptake.” 2nd Int. RILEM Workshop on Frost Resistance of Concrete, RILEM, Essen, Germany, 317–326.
Phadke, M. S. (1986). Quality engineering using robust design, Prentice-Hall, Englewood Cliffs, N.J.
Phadke, M. S., Kackar, R. N., Speeney, D. V., and Grieco, M. J. (1983). “Off-line quality control in integrated circuit fabrication using experimental design.” Bell Syst. Tech. J., 62(5), 1273–1309.
Pigeon, M., and Lachance, M. (1981). “Critical air void spacing factors for concretes submitted to slow freeze-thaw cycles.” ACI J., 78(4), 282–291.
Pigeon, M., Marchand, V., and Pleau, R. (1996). “Frost resistant concrete.” Constr. Build. Mater., 10(5), 339–347.
Ross, P. J. (1987). Taguchi techniques for quality engineering, McGraw-Hill, New York.
Şahin, R. (2003). “Optimization of frost resistance of normal portland cement concrete by Taguchi method and damage analysis.” Ph.D. thesis, Ataturk Univ., Erzurum, Turkey (in Turkish with English summary).
Taguchi, G. (1987). System of experimental design, Unipub-Kraus Int. Publications, New York.
Wang, Z., Saeki, N., Horiguchi, and Shimura, T. (2002). “Freeze-thaw resistance of water permeable concrete.” 2nd Int. RILEM Workshop on Frost Resistance of Concrete, RILEM, Essen, Germany, 303–310.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jul 8, 2005
Accepted: Dec 28, 2006
Published online: Jul 1, 2007
Published in print: Jul 2007
Notes
Note. Associate Editor: Shin-Che Huang
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.