Using the Maturity Method in Concrete Produced with Setting Agents
Publication: Journal of Materials in Civil Engineering
Volume 19, Issue 7
Abstract
The maturity function provides a reliable approach in the determination of the in situ strength of concrete at later ages. This study was aimed at determining the strength–maturity relationship on concrete specimens which were prepared using different admixtures and cured under different temperatures. For this reason, three sets of concrete specimens, having dimensions of , were produced using the set accelerating admixture, set retarding admixture, and no admixture content at a constant consistency and 0.59 water-to-cement ratio. All hardened concrete specimens were cured at 0, 20, and temperatures under 100% humidity for 1, 3, 7, and . The compression tests were applied on specimens at the end of the curing time. Equations for the relationship between maturity and strength were worked out for the admixtures used in the study.
Get full access to this article
View all available purchase options and get full access to this article.
References
Akar, O. (2002). “Effects of accelerator and retarder admixtures on concrete maturity.” MSc thesis, Osmangazi Univ., Institute of Science, Eskişehir, Turkey (in Turkish).
Akman, M. S. (1983). “Maturity degree concept and renovations in application.” Materials Seminars, ITU Civil Engineering Faculty, İstanbul, Turkey, 67–77 (in Turkish).
ASTM. (1987). “Standard practice for estimating concrete strength by the maturity method.” ASTM C 1074, Annual book of ASTM standards, 15.09, Philadelphia.
Carino, N. J., and Tank, R. C. (1992). “Maturity functions for concretes made with various cements and admixtures.” ACI Mater. J., 89(2), 188–197.
Erdoğan, T. Y. (1997). Admixtures for concrete, 1st Ed., The Middle East Technical University Press, Ankara, Turkey.
Karakurt, C. (2002). “Maturity concept of concretes made with different cements.” MSc thesis, Osmangazi Univ., Institute of Science, Eskişehir, Turkey (in Turkish).
Kirca, O., Şahin, M., and Erdem, T. K. (2002). “Compressive strength development of concrete at early ages.” 5th Int. Congress on Advances in Civil Engineering, Istanbul Technical Univ., Istanbul, Turkey, 855–865 (in Turkish).
Mc Intosh, J. D. (1949). “Electrical curing of concrete.” Mag. Concrete Res., 2, 79–88.
Ramarisknan, V., and Mac Donald, C. N. (1979). “Quality control of concrete using pulse velocity and maturity concept.” RILEM Symp. on Quality Control of Concrete Structures, Stockholm, 1, 113–120.
Saul, A. G. A. (1951). “Principles underlying the steam curing of concrete at atmospheric pressure.” Mag. Concrete Res., 2(6), 127–40.
Schutter, G. D. (2004). “Applicability of degree of hydration concept and maturity method for thermo-visco-elastic behaviour of early age concrete.” Cem. Concr. Compos., 26(5), 437–443.
Topçu, I. B. (2006a). Concrete, Chamber of Civil Engineering, Eskişehir Brunch, Publication No. 2.
Topçu, I. B. (2006b). Concrete technology, Uğur Ofset A.Ş.
Topçu, I. B., and Akman, A. (2005). “Using maturity method for determination of stripping time.” Proc., Kocaeli Earthquake Symp., Kocaeli Univ., Kocaeli, Turkey, 159–162.
Topçu, I. B., and Karakurt, C. (2002). “Maturity concept of concretes produced with different cements.” ECAS 2002 Int. Symp. on Structural and Earthquake Engineering, Ankara, Turkey, 476–483 (in Turkish).
Topçu, I. B., and Karakurt, C. (2005). “Maturity concept of concretes produced with different types of cement.” Turkish Chamber of Civil Engineering Istanbul Bulletin No. 80, 18–22.
Topçu, I. B., and Toprak, M. U. (2005). “Fine aggregate and curing temperature effect on concrete maturity.” Cem. Concr. Res., 35(4), 758–762.
Topçu, I. B., and Toprak, M. U. (2007). “A discussion of the paper The maturity method: Modifications to improve estimation of concrete strength at later ages by Yahia A. Abdel-Jawad.” Constr. Build. Mater., 21(5), 1144–1148.
Waller, V., Aloïa, L., Cussigh, F., and Lecrux, S. (2004). “Using the maturity method in concrete cracking control at early ages.” Cem. Concr. Res., 26(5), 589–599.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Feb 22, 2006
Accepted: Dec 28, 2006
Published online: Jul 1, 2007
Published in print: Jul 2007
Notes
Note. Associate Editor: Kamran M. Nemati
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.