Freeze‐Thaw Resistance of Fiber-Reinforced Polymer Composites Adhesive Bonds with Underwater Curing Epoxy
Publication: Journal of Materials in Civil Engineering
Volume 16, Issue 3
Abstract
A prefabricated fiber-reinforced polymer (FRP) composite shield or jacket was developed to repair wood piles in the field. Cylindrical E-glass/vinyl ester composite shells were bonded underwater to encase damaged wood piles. The resistance to freeze–thaw cycles of an underwater curing epoxy adhesive was evaluated. The standard test procedure for single-lap shear adhesion for FRP composite bonding, ASTM D5868, was selected. A standard procedure for freeze–thaw cycling exposure was adopted. The effect of freeze–thaw cycling exposure on the performance of the adhesive bond was discriminated by comparing the lap shear strength and the mode of failure of control and exposed samples. It was found that the lap shear strength is substantially reduced by exposure to freezing and thawing cycles. A change in the mode of failure from predominantly adhesive type to combined adhesive/cohesive type was noticed after exposure.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (1994). “ASTM D5573-94 standard practice for classifying failure modes in fiber-reinforced plastic (FRP) joints.” American Society for Testing and Materials, West Conshohocken, Pa.
ASTM. (1995). “ASTM D5868-95 standard test method for lap shear adhesion for fiber-reinforced plastic (FRP) bonding.” American Society for Testing and Materials, West Conshohocken, Pa.
Dean, A., and Voss, D. (1999). Design and analysis of experiments, Springer, New York.
Dow Chemical Co. (1999). DERAKANE epoxy vinyl ester resins/chemical resistance and engineering guide, Dow Chemical, Midland, Mich.
Instron. (1998). “Instron fast track 8802 materials test control system.” Rep. No. M21-10006-EN, Instron, Canton, Mass.
International Conference of Building Officials (ICBO). (2001). “AC125—Acceptance criteria for concrete and reinforced and unreinforced masonry strengthening using fiber-reinforced polymer (FRP), composite systems.” International Conference of Building Officials, Evaluation Service, Whittier, Calif.
Lopez-Anido, R., Harik, I., Dutta, P., and Shahrooz, B. (2001). “Field performance evaluation of multiple fiber-reinforced polymer bridge deck systems over existing girders—Phase I.” Rep. No. FHWA/HWY-2001/10, Federal Highway Administration, Washington, D.C.
Lopez-Anido, R., Michael, A. P., and Sandford, T. C.(2003). “Experimental characterization of FRP composite-wood pile structural response by bending tests.” Mar. Struct., 16(4), 257–274.
Lopez-Anido, R., Michael, A. P., and Sandford, T. C. (2004a). “FRP composite-wood pile interface characterization by push-out tests.” J. Compos. Constr., in press.
Lopez-Anido, R., Michael, A. P., Sandford, T. C., and Goodell, B. (2004b). “Repair of wood piles using prefabricated FRP composite shells.” J. Perform. Constr. Facil., in press.
SPSS. (1999). “SYSTAT 9—Statistical analysis program.” SPSS, Chicago, Ill.
Superior Polymer. (2000). “Technical data sheet: Hydrobond 500 underwater epoxy adhesive.” Superior Polymer Products, Calumet, Mich.
TPI Technology. (2001). An overview of the SCRIMP technology. TPI Technology, Inc., Warren, R.I.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Aug 1, 2002
Accepted: May 29, 2003
Published online: May 14, 2004
Published in print: Jun 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.